| .. SPDX-License-Identifier: GPL-2.0+ |
| |
| ums command |
| =========== |
| |
| Synopsis |
| -------- |
| |
| :: |
| |
| ums <dev> [<interface>] <devnum[:partnum]> |
| |
| Description |
| ----------- |
| |
| Use the USB Mass Storage class (also known as UMS) to make accessible an U-Boot |
| block device (fully or with :ref:`U-Boot's partition syntax <partitions>`) |
| to a USB host and to enable file transfers. U-Boot, the USB device, acts as a |
| simple external hard drive plugged on the host USB port. |
| |
| This command "ums" stays in the USB's treatment loop until user enters Ctrl-C. |
| |
| dev |
| USB gadget device number |
| |
| interface |
| interface for accessing the block device (mmc, sata, scsi, usb, ....) |
| defaults is "mmc" |
| |
| devnum |
| device number for selected interface |
| |
| partnum |
| partition number or 0 to expose all partitions, defaults to 0 |
| |
| Example |
| ------- |
| |
| :: |
| |
| => ums 0 mmc 0 |
| => ums 0 usb 1:2 |
| |
| Configuration |
| ------------- |
| |
| The ums command is only available if CONFIG_CMD_USB_MASS_STORAGE=y |
| and depends on CONFIG_USB_USB_GADGET and CONFIG_BLK. |
| |
| Return value |
| ------------ |
| |
| The return value $? is set to 0 (true) when the USB stack was successfully |
| started and interrupted, with Ctrl-C or after USB cable issue (detection |
| timeout or cable removal). |
| |
| If an error occurs, the return value $? is set to 1 (false). |