| /* |
| * Copyright 2015-2016 Freescale Semiconductor, Inc. |
| * Copyright 2017 NXP |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <asm/io.h> |
| #include <netdev.h> |
| #include <fm_eth.h> |
| #include <fsl_mdio.h> |
| #include <malloc.h> |
| #include <asm/types.h> |
| #include <fsl_dtsec.h> |
| #include <asm/arch/soc.h> |
| #include <asm/arch-fsl-layerscape/config.h> |
| #include <asm/arch-fsl-layerscape/immap_lsch2.h> |
| #include <asm/arch/fsl_serdes.h> |
| #include <net/pfe_eth/pfe_eth.h> |
| #include <dm/platform_data/pfe_dm_eth.h> |
| |
| #define DEFAULT_PFE_MDIO_NAME "PFE_MDIO" |
| #define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1" |
| |
| #define MASK_ETH_PHY_RST 0x00000100 |
| |
| static inline void ls1012afrdm_reset_phy(void) |
| { |
| unsigned int val; |
| struct ccsr_gpio *pgpio = (void *)(GPIO1_BASE_ADDR); |
| |
| setbits_be32(&pgpio->gpdir, MASK_ETH_PHY_RST); |
| |
| val = in_be32(&pgpio->gpdat); |
| setbits_be32(&pgpio->gpdat, val & ~MASK_ETH_PHY_RST); |
| mdelay(10); |
| |
| val = in_be32(&pgpio->gpdat); |
| setbits_be32(&pgpio->gpdat, val | MASK_ETH_PHY_RST); |
| mdelay(50); |
| } |
| |
| int pfe_eth_board_init(struct udevice *dev) |
| { |
| static int init_done; |
| struct mii_dev *bus; |
| struct pfe_mdio_info mac_mdio_info; |
| struct pfe_eth_dev *priv = dev_get_priv(dev); |
| |
| if (!init_done) { |
| ls1012afrdm_reset_phy(); |
| |
| mac_mdio_info.reg_base = (void *)EMAC1_BASE_ADDR; |
| mac_mdio_info.name = DEFAULT_PFE_MDIO_NAME; |
| |
| bus = pfe_mdio_init(&mac_mdio_info); |
| if (!bus) { |
| printf("Failed to register mdio\n"); |
| return -1; |
| } |
| |
| init_done = 1; |
| } |
| |
| if (priv->gemac_port) { |
| mac_mdio_info.reg_base = (void *)EMAC2_BASE_ADDR; |
| mac_mdio_info.name = DEFAULT_PFE_MDIO1_NAME; |
| bus = pfe_mdio_init(&mac_mdio_info); |
| if (!bus) { |
| printf("Failed to register mdio\n"); |
| return -1; |
| } |
| } |
| |
| pfe_set_mdio(priv->gemac_port, |
| miiphy_get_dev_by_name(DEFAULT_PFE_MDIO_NAME)); |
| if (!priv->gemac_port) |
| /* MAC1 */ |
| pfe_set_phy_address_mode(priv->gemac_port, |
| CONFIG_PFE_EMAC1_PHY_ADDR, |
| PHY_INTERFACE_MODE_SGMII); |
| else |
| /* MAC2 */ |
| pfe_set_phy_address_mode(priv->gemac_port, |
| CONFIG_PFE_EMAC2_PHY_ADDR, |
| PHY_INTERFACE_MODE_SGMII); |
| return 0; |
| } |
| |
| static struct pfe_eth_pdata pfe_pdata0 = { |
| .pfe_eth_pdata_mac = { |
| .iobase = (phys_addr_t)EMAC1_BASE_ADDR, |
| .phy_interface = 0, |
| }, |
| |
| .pfe_ddr_addr = { |
| .ddr_pfe_baseaddr = (void *)CONFIG_DDR_PFE_BASEADDR, |
| .ddr_pfe_phys_baseaddr = CONFIG_DDR_PFE_PHYS_BASEADDR, |
| }, |
| }; |
| |
| static struct pfe_eth_pdata pfe_pdata1 = { |
| .pfe_eth_pdata_mac = { |
| .iobase = (phys_addr_t)EMAC2_BASE_ADDR, |
| .phy_interface = 1, |
| }, |
| |
| .pfe_ddr_addr = { |
| .ddr_pfe_baseaddr = (void *)CONFIG_DDR_PFE_BASEADDR, |
| .ddr_pfe_phys_baseaddr = CONFIG_DDR_PFE_PHYS_BASEADDR, |
| }, |
| }; |
| |
| U_BOOT_DEVICE(ls1012a_pfe0) = { |
| .name = "pfe_eth", |
| .platdata = &pfe_pdata0, |
| }; |
| |
| U_BOOT_DEVICE(ls1012a_pfe1) = { |
| .name = "pfe_eth", |
| .platdata = &pfe_pdata1, |
| }; |