| /* |
| * (C) Copyright 2002-2004 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2002 Jun Gu <jung@artesyncp.com> |
| * Add support for Am29F016D and dynamic switch setting. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * Modified 4/5/2001 |
| * Wait for completion of each sector erase command issued |
| * 4/5/2001 |
| * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com |
| */ |
| |
| /* |
| * Ported to XPedite1000, 1/2 mb boot flash only |
| * Travis B. Sawyer, <travis.sawyer@sandburst.com> |
| */ |
| |
| #include <common.h> |
| #include <ppc4xx.h> |
| #include <asm/processor.h> |
| |
| |
| #undef DEBUG |
| #ifdef DEBUG |
| #define DEBUGF(x...) printf(x) |
| #else |
| #define DEBUGF(x...) |
| #endif /* DEBUG */ |
| |
| #define BOOT_SMALL_FLASH 32 /* 00100000 */ |
| #define FLASH_ONBD_N 2 /* 00000010 */ |
| #define FLASH_SRAM_SEL 1 /* 00000001 */ |
| |
| #define BOOT_SMALL_FLASH_VAL 4 |
| #define FLASH_ONBD_N_VAL 2 |
| #define FLASH_SRAM_SEL_VAL 1 |
| |
| |
| flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ |
| |
| static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = { |
| {0xfff80000}, /* 0:000: configuraton 3 */ |
| {0xfff90000}, /* 1:001: configuraton 4 */ |
| {0xfffa0000}, /* 2:010: configuraton 7 */ |
| {0xfffb0000}, /* 3:011: configuraton 8 */ |
| {0xfffc0000}, /* 4:100: configuraton 1 */ |
| {0xfffd0000}, /* 5:101: configuraton 2 */ |
| {0xfffe0000}, /* 6:110: configuraton 5 */ |
| {0xffff0000} /* 7:111: configuraton 6 */ |
| }; |
| |
| /*----------------------------------------------------------------------- |
| * Functions |
| */ |
| static ulong flash_get_size (vu_long *addr, flash_info_t *info); |
| static int write_word (flash_info_t *info, ulong dest, ulong data); |
| |
| |
| #ifdef CONFIG_XPEDITE1K |
| #define ADDR0 0x5555 |
| #define ADDR1 0x2aaa |
| #define FLASH_WORD_SIZE unsigned char |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| unsigned long flash_init (void) |
| { |
| unsigned long total_b = 0; |
| unsigned long size_b[CFG_MAX_FLASH_BANKS]; |
| unsigned short index = 0; |
| int i; |
| |
| |
| DEBUGF("\n"); |
| DEBUGF("FLASH: Index: %d\n", index); |
| |
| /* Init: no FLASHes known */ |
| for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { |
| flash_info[i].flash_id = FLASH_UNKNOWN; |
| flash_info[i].sector_count = -1; |
| flash_info[i].size = 0; |
| |
| /* check whether the address is 0 */ |
| if (flash_addr_table[index][i] == 0) { |
| continue; |
| } |
| |
| /* call flash_get_size() to initialize sector address */ |
| size_b[i] = flash_get_size( |
| (vu_long *)flash_addr_table[index][i], &flash_info[i]); |
| flash_info[i].size = size_b[i]; |
| if (flash_info[i].flash_id == FLASH_UNKNOWN) { |
| printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", |
| i, size_b[i], size_b[i]<<20); |
| flash_info[i].sector_count = -1; |
| flash_info[i].size = 0; |
| } |
| |
| total_b += flash_info[i].size; |
| } |
| |
| return total_b; |
| } |
| |
| |
| /*----------------------------------------------------------------------- |
| */ |
| void flash_print_info (flash_info_t *info) |
| { |
| int i; |
| int k; |
| int size; |
| int erased; |
| volatile unsigned long *flash; |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("missing or unknown FLASH type\n"); |
| return; |
| } |
| |
| switch (info->flash_id & FLASH_VENDMASK) { |
| case FLASH_MAN_AMD: printf ("AMD "); break; |
| case FLASH_MAN_FUJ: printf ("FUJITSU "); break; |
| case FLASH_MAN_SST: printf ("SST "); break; |
| default: printf ("Unknown Vendor "); break; |
| } |
| |
| switch (info->flash_id & FLASH_TYPEMASK) { |
| case FLASH_AMD016: printf ("AM29F016D (16 Mbit, uniform sector size)\n"); |
| break; |
| case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n"); |
| break; |
| case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); |
| break; |
| case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); |
| break; |
| case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); |
| break; |
| case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); |
| break; |
| case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n"); |
| break; |
| case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n"); |
| break; |
| default: printf ("Unknown Chip Type\n"); |
| break; |
| } |
| |
| printf (" Size: %ld KB in %d Sectors\n", |
| info->size >> 10, info->sector_count); |
| |
| printf (" Sector Start Addresses:"); |
| for (i=0; i<info->sector_count; ++i) { |
| /* |
| * Check if whole sector is erased |
| */ |
| if (i != (info->sector_count-1)) |
| size = info->start[i+1] - info->start[i]; |
| else |
| size = info->start[0] + info->size - info->start[i]; |
| erased = 1; |
| flash = (volatile unsigned long *)info->start[i]; |
| size = size >> 2; /* divide by 4 for longword access */ |
| for (k=0; k<size; k++) |
| { |
| if (*flash++ != 0xffffffff) |
| { |
| erased = 0; |
| break; |
| } |
| } |
| |
| if ((i % 5) == 0) |
| printf ("\n "); |
| printf (" %08lX%s%s", |
| info->start[i], |
| erased ? " E" : " ", |
| info->protect[i] ? "RO " : " " |
| ); |
| } |
| printf ("\n"); |
| return; |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| /* |
| * The following code cannot be run from FLASH! |
| */ |
| static ulong flash_get_size (vu_long *addr, flash_info_t *info) |
| { |
| short i; |
| FLASH_WORD_SIZE value; |
| ulong base = (ulong)addr; |
| volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr; |
| |
| DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr ); |
| |
| /* Write auto select command: read Manufacturer ID */ |
| udelay(10000); |
| addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; |
| udelay(1000); |
| addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055; |
| udelay(1000); |
| addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090; |
| udelay(1000); |
| |
| #ifdef CONFIG_ADCIOP |
| value = addr2[2]; |
| #else |
| value = addr2[0]; |
| #endif |
| |
| DEBUGF("FLASH MANUFACT: %x\n", value); |
| |
| switch (value) { |
| case (FLASH_WORD_SIZE)AMD_MANUFACT: |
| info->flash_id = FLASH_MAN_AMD; |
| break; |
| case (FLASH_WORD_SIZE)FUJ_MANUFACT: |
| info->flash_id = FLASH_MAN_FUJ; |
| break; |
| case (FLASH_WORD_SIZE)SST_MANUFACT: |
| info->flash_id = FLASH_MAN_SST; |
| break; |
| case (FLASH_WORD_SIZE)STM_MANUFACT: |
| info->flash_id = FLASH_MAN_STM; |
| break; |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| info->sector_count = 0; |
| info->size = 0; |
| return (0); /* no or unknown flash */ |
| } |
| |
| #ifdef CONFIG_ADCIOP |
| value = addr2[0]; /* device ID */ |
| debug ("\ndev_code=%x\n", value); |
| #else |
| value = addr2[1]; /* device ID */ |
| #endif |
| |
| DEBUGF("\nFLASH DEVICEID: %x\n", value); |
| |
| switch (value) { |
| case (FLASH_WORD_SIZE)AMD_ID_LV040B: |
| info->flash_id += FLASH_AM040; |
| info->sector_count = 8; |
| info->size = 0x00080000; /* => 512 kb */ |
| break; |
| |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| return (0); /* => no or unknown flash */ |
| |
| } |
| |
| /* set up sector start address table */ |
| if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || |
| (info->flash_id == FLASH_AM040) || |
| (info->flash_id == FLASH_AMD016)) { |
| for (i = 0; i < info->sector_count; i++) |
| info->start[i] = base + (i * 0x00010000); |
| } else { |
| if (info->flash_id & FLASH_BTYPE) { |
| /* set sector offsets for bottom boot block type */ |
| info->start[0] = base + 0x00000000; |
| info->start[1] = base + 0x00004000; |
| info->start[2] = base + 0x00006000; |
| info->start[3] = base + 0x00008000; |
| for (i = 4; i < info->sector_count; i++) { |
| info->start[i] = base + (i * 0x00010000) - 0x00030000; |
| } |
| } else { |
| /* set sector offsets for top boot block type */ |
| i = info->sector_count - 1; |
| info->start[i--] = base + info->size - 0x00004000; |
| info->start[i--] = base + info->size - 0x00006000; |
| info->start[i--] = base + info->size - 0x00008000; |
| for (; i >= 0; i--) { |
| info->start[i] = base + i * 0x00010000; |
| } |
| } |
| } |
| |
| /* check for protected sectors */ |
| for (i = 0; i < info->sector_count; i++) { |
| /* read sector protection at sector address, (A7 .. A0) = 0x02 */ |
| /* D0 = 1 if protected */ |
| #ifdef CONFIG_ADCIOP |
| addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]); |
| info->protect[i] = addr2[4] & 1; |
| #else |
| addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]); |
| if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) |
| info->protect[i] = 0; |
| else |
| info->protect[i] = addr2[2] & 1; |
| #endif |
| } |
| |
| /* |
| * Prevent writes to uninitialized FLASH. |
| */ |
| if (info->flash_id != FLASH_UNKNOWN) { |
| #if 0 /* test-only */ |
| #ifdef CONFIG_ADCIOP |
| addr2 = (volatile unsigned char *)info->start[0]; |
| addr2[ADDR0] = 0xAA; |
| addr2[ADDR1] = 0x55; |
| addr2[ADDR0] = 0xF0; /* reset bank */ |
| #else |
| addr2 = (FLASH_WORD_SIZE *)info->start[0]; |
| *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ |
| #endif |
| #else /* test-only */ |
| addr2 = (FLASH_WORD_SIZE *)info->start[0]; |
| *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ |
| #endif /* test-only */ |
| } |
| |
| return (info->size); |
| } |
| |
| int wait_for_DQ7(flash_info_t *info, int sect) |
| { |
| ulong start, now, last; |
| volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]); |
| |
| start = get_timer (0); |
| last = start; |
| while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) { |
| if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { |
| printf ("Timeout\n"); |
| return -1; |
| } |
| /* show that we're waiting */ |
| if ((now - last) > 1000) { /* every second */ |
| putc ('.'); |
| last = now; |
| } |
| } |
| return 0; |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| int flash_erase (flash_info_t *info, int s_first, int s_last) |
| { |
| volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]); |
| volatile FLASH_WORD_SIZE *addr2; |
| int flag, prot, sect, l_sect; |
| int i; |
| |
| if ((s_first < 0) || (s_first > s_last)) { |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("- missing\n"); |
| } else { |
| printf ("- no sectors to erase\n"); |
| } |
| return 1; |
| } |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("Can't erase unknown flash type - aborted\n"); |
| return 1; |
| } |
| |
| prot = 0; |
| for (sect=s_first; sect<=s_last; ++sect) { |
| if (info->protect[sect]) { |
| prot++; |
| } |
| } |
| |
| if (prot) { |
| printf ("- Warning: %d protected sectors will not be erased!\n", |
| prot); |
| } else { |
| printf ("\n"); |
| } |
| |
| l_sect = -1; |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| /* Start erase on unprotected sectors */ |
| for (sect = s_first; sect<=s_last; sect++) { |
| if (info->protect[sect] == 0) { /* not protected */ |
| addr2 = (FLASH_WORD_SIZE *)(info->start[sect]); |
| printf("Erasing sector %p\n", addr2); |
| |
| if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { |
| addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; |
| addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; |
| addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; |
| addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; |
| addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; |
| addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */ |
| for (i=0; i<50; i++) |
| udelay(1000); /* wait 1 ms */ |
| } else { |
| addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; |
| addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; |
| addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; |
| addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; |
| addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; |
| addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */ |
| } |
| l_sect = sect; |
| /* |
| * Wait for each sector to complete, it's more |
| * reliable. According to AMD Spec, you must |
| * issue all erase commands within a specified |
| * timeout. This has been seen to fail, especially |
| * if printf()s are included (for debug)!! |
| */ |
| wait_for_DQ7(info, sect); |
| } |
| } |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| /* wait at least 80us - let's wait 1 ms */ |
| udelay (1000); |
| |
| #if 0 |
| /* |
| * We wait for the last triggered sector |
| */ |
| if (l_sect < 0) |
| goto DONE; |
| wait_for_DQ7(info, l_sect); |
| |
| DONE: |
| #endif |
| /* reset to read mode */ |
| addr = (FLASH_WORD_SIZE *)info->start[0]; |
| addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ |
| |
| printf (" done\n"); |
| return 0; |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Copy memory to flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| |
| int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) |
| { |
| ulong cp, wp, data; |
| int i, l, rc; |
| |
| wp = (addr & ~3); /* get lower word aligned address */ |
| |
| /* |
| * handle unaligned start bytes |
| */ |
| if ((l = addr - wp) != 0) { |
| data = 0; |
| for (i=0, cp=wp; i<l; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| for (; i<4 && cnt>0; ++i) { |
| data = (data << 8) | *src++; |
| --cnt; |
| ++cp; |
| } |
| for (; cnt==0 && i<4; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| |
| if ((rc = write_word(info, wp, data)) != 0) { |
| return (rc); |
| } |
| wp += 4; |
| } |
| |
| /* |
| * handle word aligned part |
| */ |
| while (cnt >= 4) { |
| data = 0; |
| for (i=0; i<4; ++i) { |
| data = (data << 8) | *src++; |
| } |
| if ((rc = write_word(info, wp, data)) != 0) { |
| return (rc); |
| } |
| wp += 4; |
| cnt -= 4; |
| } |
| |
| if (cnt == 0) { |
| return (0); |
| } |
| |
| /* |
| * handle unaligned tail bytes |
| */ |
| data = 0; |
| for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { |
| data = (data << 8) | *src++; |
| --cnt; |
| } |
| for (; i<4; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| |
| return (write_word(info, wp, data)); |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Write a word to Flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| static int write_word (flash_info_t * info, ulong dest, ulong data) |
| { |
| volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]); |
| volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest; |
| volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data; |
| ulong start; |
| int i; |
| |
| /* Check if Flash is (sufficiently) erased */ |
| if ((*((volatile FLASH_WORD_SIZE *) dest) & |
| (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) { |
| return (2); |
| } |
| |
| for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) { |
| int flag; |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts (); |
| |
| addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; |
| addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; |
| addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0; |
| |
| dest2[i] = data2[i]; |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts (); |
| |
| /* data polling for D7 */ |
| start = get_timer (0); |
| while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) != |
| (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) { |
| |
| if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { |
| return (1); |
| } |
| } |
| } |
| |
| return (0); |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |