| |
| #if (DEBUG_SATA) |
| #define PRINTF(fmt,args...) printf (fmt ,##args) |
| #else |
| #define PRINTF(fmt,args...) |
| #endif |
| |
| struct sata_ioports { |
| unsigned long cmd_addr; |
| unsigned long data_addr; |
| unsigned long error_addr; |
| unsigned long feature_addr; |
| unsigned long nsect_addr; |
| unsigned long lbal_addr; |
| unsigned long lbam_addr; |
| unsigned long lbah_addr; |
| unsigned long device_addr; |
| unsigned long status_addr; |
| unsigned long command_addr; |
| unsigned long altstatus_addr; |
| unsigned long ctl_addr; |
| unsigned long bmdma_addr; |
| unsigned long scr_addr; |
| }; |
| |
| struct sata_port { |
| unsigned char port_no; /* primary=0, secondary=1 */ |
| struct sata_ioports ioaddr; /* ATA cmd/ctl/dma reg blks */ |
| unsigned char ctl_reg; |
| unsigned char last_ctl; |
| unsigned char port_state; /* 1-port is available and */ |
| /* 0-port is not available */ |
| unsigned char dev_mask; |
| }; |
| |
| /***********SATA LIBRARY SPECIFIC DEFINITIONS AND DECLARATIONS**************/ |
| #ifdef SATA_DECL /*SATA library specific declarations */ |
| #define ata_id_has_lba48(id) ((id)[83] & (1 << 10)) |
| #define ata_id_has_lba(id) ((id)[49] & (1 << 9)) |
| #define ata_id_has_dma(id) ((id)[49] & (1 << 8)) |
| #define ata_id_u32(id,n) \ |
| (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)])) |
| #define ata_id_u64(id,n) \ |
| (((u64) (id)[(n) + 3] << 48) | \ |
| ((u64) (id)[(n) + 2] << 32) | \ |
| ((u64) (id)[(n) + 1] << 16) | \ |
| ((u64) (id)[(n) + 0]) ) |
| #endif |
| |
| #ifdef SATA_DECL /*SATA library specific declarations */ |
| static inline void |
| ata_dump_id (u16 * id) |
| { |
| PRINTF ("49==0x%04x " |
| "53==0x%04x " |
| "63==0x%04x " |
| "64==0x%04x " |
| "75==0x%04x \n", id[49], id[53], id[63], id[64], id[75]); |
| PRINTF ("80==0x%04x " |
| "81==0x%04x " |
| "82==0x%04x " |
| "83==0x%04x " |
| "84==0x%04x \n", id[80], id[81], id[82], id[83], id[84]); |
| PRINTF ("88==0x%04x " "93==0x%04x\n", id[88], id[93]); |
| } |
| #endif |
| |
| #ifdef SATA_DECL /*SATA library specific declarations */ |
| int sata_bus_softreset (int num); |
| void sata_identify (int num, int dev); |
| void sata_port (struct sata_ioports *ioport); |
| void set_Feature_cmd (int num, int dev); |
| int sata_devchk (struct sata_ioports *ioaddr, int dev); |
| void dev_select (struct sata_ioports *ioaddr, int dev); |
| u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, unsigned int max); |
| u8 sata_chk_status (struct sata_ioports *ioaddr); |
| ulong sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buffer); |
| ulong sata_write (int device,ulong blknr, lbaint_t blkcnt, void * buffer); |
| void msleep (int count); |
| #endif |
| |
| /************DRIVER SPECIFIC DEFINITIONS AND DECLARATIONS**************/ |
| |
| #ifdef DRV_DECL /*Driver specific declaration */ |
| int init_sata (int dev); |
| #endif |
| |
| #ifdef DRV_DECL /*Defines Driver Specific variables */ |
| struct sata_port port[CFG_SATA_MAXBUS]; |
| #endif |