| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. |
| */ |
| |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <dwmmc.h> |
| #include <malloc.h> |
| #include <asm/arcregs.h> |
| #include "axs10x.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define AXS_MB_CREG 0xE0011000 |
| |
| int board_early_init_f(void) |
| { |
| if (readl((void __iomem *)AXS_MB_CREG + 0x234) & (1 << 28)) |
| gd->board_type = AXS_MB_V3; |
| else |
| gd->board_type = AXS_MB_V2; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_ISA_ARCV2 |
| |
| void board_jump_and_run(ulong entry, int zero, int arch, uint params) |
| { |
| void (*kernel_entry)(int zero, int arch, uint params); |
| |
| kernel_entry = (void (*)(int, int, uint))entry; |
| |
| smp_set_core_boot_addr(entry, -1); |
| smp_kick_all_cpus(); |
| kernel_entry(zero, arch, params); |
| } |
| |
| #define RESET_VECTOR_ADDR 0x0 |
| |
| void smp_set_core_boot_addr(unsigned long addr, int corenr) |
| { |
| /* All cores have reset vector pointing to 0 */ |
| writel(addr, (void __iomem *)RESET_VECTOR_ADDR); |
| |
| /* Make sure other cores see written value in memory */ |
| flush_dcache_all(); |
| } |
| |
| void smp_kick_all_cpus(void) |
| { |
| /* CPU start CREG */ |
| #define AXC003_CREG_CPU_START 0xF0001400 |
| /* Bits positions in CPU start CREG */ |
| #define BITS_START 0 |
| #define BITS_START_MODE 4 |
| #define BITS_CORE_SEL 9 |
| |
| /* |
| * In axs103 v1.1 START bits semantics has changed quite a bit. |
| * We used to have a generic START bit for all cores selected by CORE_SEL mask. |
| * But now we don't touch CORE_SEL at all because we have a dedicated START bit |
| * for each core: |
| * bit 0: Core 0 (master) |
| * bit 1: Core 1 (slave) |
| */ |
| #define BITS_START_CORE1 1 |
| |
| #define ARCVER_HS38_3_0 0x53 |
| |
| int core_family = read_aux_reg(ARC_AUX_IDENTITY) & 0xff; |
| int cmd = readl((void __iomem *)AXC003_CREG_CPU_START); |
| |
| if (core_family < ARCVER_HS38_3_0) { |
| cmd |= (1 << BITS_CORE_SEL) | (1 << BITS_START); |
| cmd &= ~(1 << BITS_START_MODE); |
| } else { |
| cmd |= (1 << BITS_START_CORE1); |
| } |
| writel(cmd, (void __iomem *)AXC003_CREG_CPU_START); |
| } |
| #endif |
| |
| int checkboard(void) |
| { |
| printf("Board: ARC Software Development Platform AXS%s\n", |
| is_isa_arcv2() ? "103" : "101"); |
| |
| return 0; |
| }; |