| /* |
| * (C) Copyright 2005 |
| * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de> |
| * |
| * Based On |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include "cfm_flash.h" |
| |
| #define PHYS_FLASH_1 CFG_FLASH_BASE |
| #define FLASH_BANK_SIZE 0x200000 |
| |
| flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; |
| |
| void flash_print_info (flash_info_t * info) |
| { |
| int i; |
| |
| switch (info->flash_id & FLASH_VENDMASK) { |
| case (AMD_MANUFACT & FLASH_VENDMASK): |
| printf ("AMD: "); |
| switch (info->flash_id & FLASH_TYPEMASK) { |
| case (AMD_ID_LV160B & FLASH_TYPEMASK): |
| printf ("AM29LV160B (16Bit)\n"); |
| break; |
| default: |
| printf ("Unknown Chip Type\n"); |
| break; |
| } |
| break; |
| case FREESCALE_MANUFACT & FLASH_VENDMASK: |
| cfm_flash_print_info (info); |
| break; |
| default: |
| printf ("Unknown Vendor "); |
| break; |
| } |
| |
| puts (" Size: "); |
| if ((info->size >> 20) > 0) |
| { |
| printf ("%ld MiB",info->size >> 20); |
| } |
| else |
| { |
| printf ("%ld KiB",info->size >> 10); |
| } |
| printf (" in %d Sectors\n", info->sector_count); |
| |
| printf (" Sector Start Addresses:"); |
| for (i = 0; i < info->sector_count; i++) { |
| if ((i % 4) == 0) { |
| printf ("\n "); |
| } |
| printf ("%02d: %08lX%s ", i,info->start[i], |
| info->protect[i] ? " P" : " "); |
| } |
| printf ("\n\n"); |
| } |
| |
| unsigned long flash_init (void) |
| { |
| int i, j; |
| ulong size = 0; |
| |
| for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { |
| ulong flashbase = 0; |
| |
| switch (i) |
| { |
| case 1: |
| flash_info[i].flash_id = |
| (AMD_MANUFACT & FLASH_VENDMASK) | |
| (AMD_ID_LV160B & FLASH_TYPEMASK); |
| flash_info[i].size = FLASH_BANK_SIZE; |
| flash_info[i].sector_count = CFG_MAX_FLASH_SECT; |
| memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); |
| flashbase = PHYS_FLASH_1; |
| for (j = 0; j < flash_info[i].sector_count; j++) { |
| if (j == 0) { |
| /* 1st is 16 KiB */ |
| flash_info[i].start[j] = flashbase; |
| } |
| if ((j >= 1) && (j <= 2)) { |
| /* 2nd and 3rd are 8 KiB */ |
| flash_info[i].start[j] = |
| flashbase + 0x4000 + 0x2000 * (j - 1); |
| } |
| if (j == 3) { |
| /* 4th is 32 KiB */ |
| flash_info[i].start[j] = flashbase + 0x8000; |
| } |
| if ((j >= 4) && (j <= 34)) { |
| /* rest is 256 KiB */ |
| flash_info[i].start[j] = |
| flashbase + 0x10000 + 0x10000 * (j - 4); |
| } |
| } |
| break; |
| case 0: |
| cfm_flash_init (&flash_info[i]); |
| break; |
| default: |
| panic ("configured to many flash banks!\n"); |
| } |
| |
| size += flash_info[i].size; |
| } |
| |
| flash_protect (FLAG_PROTECT_SET, |
| CFG_FLASH_BASE, |
| CFG_FLASH_BASE + 0xffff, &flash_info[0]); |
| |
| return size; |
| } |
| |
| #define CMD_READ_ARRAY 0x00F0 |
| #define CMD_UNLOCK1 0x00AA |
| #define CMD_UNLOCK2 0x0055 |
| #define CMD_ERASE_SETUP 0x0080 |
| #define CMD_ERASE_CONFIRM 0x0030 |
| #define CMD_PROGRAM 0x00A0 |
| #define CMD_UNLOCK_BYPASS 0x0020 |
| |
| #define MEM_FLASH_ADDR1 (*(volatile u16 *)(info->start[0] + (0x00000555<<1))) |
| #define MEM_FLASH_ADDR2 (*(volatile u16 *)(info->start[0] + (0x000002AA<<1))) |
| |
| |
| #define BIT_ERASE_DONE 0x0080 |
| #define BIT_RDY_MASK 0x0080 |
| #define BIT_PROGRAM_ERROR 0x0020 |
| #define BIT_TIMEOUT 0x80000000 /* our flag */ |
| |
| #define ERR_READY -1 |
| |
| int amd_flash_erase_sector(flash_info_t * info, int sector) |
| { |
| int state; |
| ulong result; |
| |
| volatile u16 *addr = |
| (volatile u16 *) (info->start[sector]); |
| |
| MEM_FLASH_ADDR1 = CMD_UNLOCK1; |
| MEM_FLASH_ADDR2 = CMD_UNLOCK2; |
| MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; |
| |
| MEM_FLASH_ADDR1 = CMD_UNLOCK1; |
| MEM_FLASH_ADDR2 = CMD_UNLOCK2; |
| *addr = CMD_ERASE_CONFIRM; |
| |
| /* wait until flash is ready */ |
| state = 0; |
| set_timer (0); |
| |
| do { |
| result = *addr; |
| |
| /* check timeout */ |
| if (get_timer (0) > CFG_FLASH_ERASE_TOUT) { |
| MEM_FLASH_ADDR1 = CMD_READ_ARRAY; |
| state = ERR_TIMOUT; |
| } |
| |
| if (!state && (result & 0xFFFF) & BIT_ERASE_DONE) |
| state = ERR_READY; |
| } |
| while (!state); |
| if (state == ERR_READY) |
| state = ERR_OK; |
| |
| MEM_FLASH_ADDR1 = CMD_READ_ARRAY; |
| |
| return state; |
| } |
| |
| int flash_erase (flash_info_t * info, int s_first, int s_last) |
| { |
| int iflag, cflag; |
| int sector; |
| int rc; |
| |
| rc = ERR_OK; |
| |
| if (info->flash_id == FLASH_UNKNOWN) |
| { |
| rc = ERR_UNKNOWN_FLASH_TYPE; |
| } /* (info->flash_id == FLASH_UNKNOWN) */ |
| |
| if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count) |
| { |
| rc = ERR_INVAL; |
| } |
| |
| cflag = icache_status (); |
| icache_disable (); |
| iflag = disable_interrupts (); |
| |
| for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) { |
| |
| if (info->protect[sector]) |
| { |
| putc('P'); /* protected sector will not erase */ |
| } |
| else |
| { |
| /* erase on unprotected sector */ |
| puts("E\b"); |
| switch (info->flash_id & FLASH_VENDMASK) |
| { |
| case (AMD_MANUFACT & FLASH_VENDMASK): |
| rc = amd_flash_erase_sector(info,sector); |
| break; |
| case (FREESCALE_MANUFACT & FLASH_VENDMASK): |
| rc = cfm_flash_erase_sector(info,sector); |
| break; |
| default: |
| return ERR_UNKNOWN_FLASH_VENDOR; |
| } |
| putc('.'); |
| } |
| } |
| if (rc!=ERR_OK) |
| { |
| printf ("\n "); |
| flash_perror (rc); |
| } |
| else |
| { |
| printf (" done\n"); |
| } |
| |
| udelay (10000); /* allow flash to settle - wait 10 ms */ |
| |
| if (iflag) |
| enable_interrupts (); |
| |
| if (cflag) |
| icache_enable (); |
| |
| return rc; |
| } |
| |
| volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data) |
| { |
| volatile u16 *addr; |
| ulong result; |
| int cflag, iflag; |
| int state; |
| |
| /* |
| * Check if Flash is (sufficiently) erased |
| */ |
| addr = (volatile u16 *) dest; |
| |
| result = *addr; |
| if ((result & data) != data) |
| return ERR_NOT_ERASED; |
| |
| /* |
| * Disable interrupts which might cause a timeout |
| * here. Remember that our exception vectors are |
| * at address 0 in the flash, and we don't want a |
| * (ticker) exception to happen while the flash |
| * chip is in programming mode. |
| */ |
| |
| cflag = icache_status (); |
| icache_disable (); |
| iflag = disable_interrupts (); |
| |
| MEM_FLASH_ADDR1 = CMD_UNLOCK1; |
| MEM_FLASH_ADDR2 = CMD_UNLOCK2; |
| MEM_FLASH_ADDR1 = CMD_PROGRAM; |
| *addr = data; |
| |
| /* arm simple, non interrupt dependent timer */ |
| set_timer (0); |
| |
| /* wait until flash is ready */ |
| state = 0; |
| do { |
| result = *addr; |
| |
| /* check timeout */ |
| if (get_timer (0) > CFG_FLASH_ERASE_TOUT) { |
| state = ERR_TIMOUT; |
| } |
| if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK))) |
| state = ERR_READY; |
| |
| } while (!state); |
| |
| *addr = CMD_READ_ARRAY; |
| |
| if (state == ERR_READY) |
| state = ERR_OK; |
| if ((*addr != data) && (state != ERR_TIMOUT)) |
| state = ERR_PROG_ERROR; |
| |
| if (iflag) |
| enable_interrupts (); |
| |
| if (cflag) |
| icache_enable (); |
| |
| return state; |
| } |
| |
| int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) |
| { |
| int rc; |
| ulong dest; |
| u16 data; |
| |
| rc = ERR_OK; |
| if (addr & 1) |
| { |
| debug ("Byte alignment not supported\n"); |
| rc = ERR_ALIGN; |
| } |
| if (cnt & 1) |
| { |
| debug ("Byte transfer not supported\n"); |
| rc = ERR_ALIGN; |
| } |
| |
| dest = addr; |
| while ((cnt>=2) && (rc == ERR_OK)) |
| { |
| data = *((volatile u16 *) src); |
| rc=amd_write_word (info,dest,data); |
| src +=2; |
| dest +=2; |
| cnt -=2; |
| } |
| return rc; |
| } |
| |
| int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) |
| { |
| int rc; |
| |
| switch (info->flash_id & FLASH_VENDMASK) |
| { |
| case (AMD_MANUFACT & FLASH_VENDMASK): |
| rc = amd_flash_write_buff(info,src,addr,cnt); |
| break; |
| case (FREESCALE_MANUFACT & FLASH_VENDMASK): |
| rc = cfm_flash_write_buff(info,src,addr,cnt); |
| break; |
| default: |
| rc = ERR_UNKNOWN_FLASH_VENDOR; |
| } |
| return rc; |
| |
| } |
| int amd_flash_protect(flash_info_t * info,long sector,int prot) |
| { |
| int rc; |
| rc= ERR_OK; |
| if (prot) |
| { |
| info->protect[sector]=1; |
| } |
| else |
| { |
| info->protect[sector]=0; |
| } |
| return rc; |
| } |
| |
| #ifdef CFG_FLASH_PROTECTION |
| |
| int flash_real_protect(flash_info_t * info,long sector,int prot) |
| { |
| int rc; |
| |
| switch (info->flash_id & FLASH_VENDMASK) |
| { |
| case (AMD_MANUFACT & FLASH_VENDMASK): |
| rc = amd_flash_protect(info,sector,prot); |
| break; |
| case (FREESCALE_MANUFACT & FLASH_VENDMASK): |
| rc = cfm_flash_protect(info,sector,prot); |
| break; |
| default: |
| rc = ERR_UNKNOWN_FLASH_VENDOR; |
| } |
| return rc; |
| } |
| |
| #endif |