blob: d36f734e49cdda356db76b1affd966721820274f [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2021 Ronetix GmbH
*
* Author: Ilko Iliev <iliev@ronetix.at>
*/
#include <common.h>
#include <cpu_func.h>
#include <init.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/mx7-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch-mx7/mx7-ddr.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/gpio.h>
#include <fsl_esdhc_imx.h>
#include <spl.h>
static struct ddrc ddrc_regs_val = {
.mstr = 0x01040001,
.rfshtmg = 0x00400046,
.init1 = 0x00690000,
.init0 = 0x00020083,
.init3 = 0x09300004,
.init4 = 0x04080000,
.init5 = 0x00100004,
.rankctl = 0x0000033F,
.dramtmg0 = 0x09081109,
.dramtmg1 = 0x0007020d,
.dramtmg2 = 0x03040407,
.dramtmg3 = 0x00002006,
.dramtmg4 = 0x04020205,
.dramtmg5 = 0x03030202,
.dramtmg8 = 0x00000803,
.zqctl0 = 0x00800020,
.dfitmg0 = 0x02098204,
.dfitmg1 = 0x00030303,
.dfiupd0 = 0x80400003,
.dfiupd1 = 0x00100020,
.dfiupd2 = 0x80100004,
.addrmap4 = 0x00000F0F,
.odtcfg = 0x06000604,
.odtmap = 0x00000001,
.rfshtmg = 0x00400046,
.dramtmg0 = 0x09081109,
.addrmap0 = 0x0000001f,
.addrmap1 = 0x00080808,
.addrmap4 = 0x00000f0f,
.addrmap5 = 0x07070707,
.addrmap6 = 0x0f0f0707,
};
static struct ddrc_mp ddrc_mp_val = {
.pctrl_0 = 0x00000001,
};
static struct ddr_phy ddr_phy_regs_val = {
.phy_con0 = 0x17420f40,
.phy_con1 = 0x10210100,
.phy_con4 = 0x00060807,
.mdll_con0 = 0x1010007e,
.drvds_con0 = 0x00000d6e,
.cmd_sdll_con0 = 0x00000010,
.offset_lp_con0 = 0x0000000f,
.offset_rd_con0 = 0x0a0a0a0a,
.offset_wr_con0 = 0x06060606,
};
static struct mx7_calibration calib_param = {
.num_val = 5,
.values = {
0x0E407304,
0x0E447304,
0x0E447306,
0x0E447304,
0x0E447304,
},
};
static void ddr_init(void)
{
mx7_dram_cfg(&ddrc_regs_val, &ddrc_mp_val, &ddr_phy_regs_val, &calib_param);
}
#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \
PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
static iomux_v3_cfg_t const uart1_pads[] = {
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
void uart1_pads_set(void)
{
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
}
void board_init_f(ulong dummy)
{
arch_cpu_init();
uart1_pads_set();
timer_init();
preloader_console_init();
ddr_init();
memset(__bss_start, 0, __bss_end - __bss_start);
board_init_r(NULL, 0);
}
void reset_cpu(void)
{
}
#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
PAD_CTL_HYS | PAD_CTL_PUE | \
PAD_CTL_PUS_PU47KOHM)
static iomux_v3_cfg_t const usdhc1_pads[] = {
MX7D_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX7D_PAD_SD1_CD_B__GPIO5_IO0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
};
void usdhc1_pads_set(void)
{
imx_iomux_v3_setup_multiple_pads(usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
}
static struct fsl_esdhc_cfg usdhc_cfg = {
USDHC1_BASE_ADDR, 0, 4
};
int board_mmc_init(struct bd_info *bis)
{
usdhc1_pads_set();
usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
return fsl_esdhc_initialize(bis, &usdhc_cfg);
}
int board_mmc_getcd(struct mmc *mmc)
{
return 1;
}