blob: fdfb6187b8e37c033198b7d63b851d29148aee48 [file] [log] [blame]
menu "x86 architecture"
depends on X86
config SYS_ARCH
default "x86"
config USE_PRIVATE_LIBGCC
default y
choice
prompt "Target select"
config TARGET_COREBOOT
bool "Support coreboot"
help
This target is used for running U-Boot on top of Coreboot. In
this case Coreboot does the early inititalisation, and U-Boot
takes over once the RAM, video and CPU are fully running.
U-Boot is loaded as a fallback payload from Coreboot, in
Coreboot terminology. This method was used for the Chromebook
Pixel when launched.
config TARGET_CHROMEBOOK_LINK
bool "Support Chromebook link"
help
This is the Chromebook Pixel released in 2013. It uses an Intel
i5 Ivybridge which is a die-shrink of Sandybridge, with 4GB of
SDRAM. It has a Panther Point platform controller hub, PCIe
WiFi and Bluetooth. It also includes a 720p webcam, USB SD
reader, microphone and speakers, display port and 32GB SATA
solid state drive. There is a Chrome OS EC connected on LPC,
and it provides a 2560x1700 high resolution touch-enabled LCD
display.
endchoice
config RAMBASE
hex
default 0x100000
config RAMTOP
hex
default 0x200000
config XIP_ROM_SIZE
hex
default 0x10000
config CPU_ADDR_BITS
int
default 36
config HPET_ADDRESS
hex
default 0xfed00000 if !HPET_ADDRESS_OVERRIDE
config SMM_TSEG
bool
default n
config SMM_TSEG_SIZE
hex
config BOARD_ROMSIZE_KB_512
bool
config BOARD_ROMSIZE_KB_1024
bool
config BOARD_ROMSIZE_KB_2048
bool
config BOARD_ROMSIZE_KB_4096
bool
config BOARD_ROMSIZE_KB_8192
bool
config BOARD_ROMSIZE_KB_16384
bool
choice
prompt "ROM chip size"
default UBOOT_ROMSIZE_KB_512 if BOARD_ROMSIZE_KB_512
default UBOOT_ROMSIZE_KB_1024 if BOARD_ROMSIZE_KB_1024
default UBOOT_ROMSIZE_KB_2048 if BOARD_ROMSIZE_KB_2048
default UBOOT_ROMSIZE_KB_4096 if BOARD_ROMSIZE_KB_4096
default UBOOT_ROMSIZE_KB_8192 if BOARD_ROMSIZE_KB_8192
default UBOOT_ROMSIZE_KB_16384 if BOARD_ROMSIZE_KB_16384
help
Select the size of the ROM chip you intend to flash U-Boot on.
The build system will take care of creating a u-boot.rom file
of the matching size.
config UBOOT_ROMSIZE_KB_512
bool "512 KB"
help
Choose this option if you have a 512 KB ROM chip.
config UBOOT_ROMSIZE_KB_1024
bool "1024 KB (1 MB)"
help
Choose this option if you have a 1024 KB (1 MB) ROM chip.
config UBOOT_ROMSIZE_KB_2048
bool "2048 KB (2 MB)"
help
Choose this option if you have a 2048 KB (2 MB) ROM chip.
config UBOOT_ROMSIZE_KB_4096
bool "4096 KB (4 MB)"
help
Choose this option if you have a 4096 KB (4 MB) ROM chip.
config UBOOT_ROMSIZE_KB_8192
bool "8192 KB (8 MB)"
help
Choose this option if you have a 8192 KB (8 MB) ROM chip.
config UBOOT_ROMSIZE_KB_16384
bool "16384 KB (16 MB)"
help
Choose this option if you have a 16384 KB (16 MB) ROM chip.
endchoice
# Map the config names to an integer (KB).
config UBOOT_ROMSIZE_KB
int
default 512 if UBOOT_ROMSIZE_KB_512
default 1024 if UBOOT_ROMSIZE_KB_1024
default 2048 if UBOOT_ROMSIZE_KB_2048
default 4096 if UBOOT_ROMSIZE_KB_4096
default 8192 if UBOOT_ROMSIZE_KB_8192
default 16384 if UBOOT_ROMSIZE_KB_16384
# Map the config names to a hex value (bytes).
config ROM_SIZE
hex
default 0x80000 if UBOOT_ROMSIZE_KB_512
default 0x100000 if UBOOT_ROMSIZE_KB_1024
default 0x200000 if UBOOT_ROMSIZE_KB_2048
default 0x400000 if UBOOT_ROMSIZE_KB_4096
default 0x800000 if UBOOT_ROMSIZE_KB_8192
default 0xc00000 if UBOOT_ROMSIZE_KB_12288
default 0x1000000 if UBOOT_ROMSIZE_KB_16384
config HAVE_INTEL_ME
bool "Platform requires Intel Management Engine"
help
Newer higher-end devices have an Intel Management Engine (ME)
which is a very large binary blob (typically 1.5MB) which is
required for the platform to work. This enforces a particular
SPI flash format. You will need to supply the me.bin file in
your board directory.
config X86_RAMTEST
bool "Perform a simple RAM test after SDRAM initialisation"
help
If there is something wrong with SDRAM then the platform will
often crash within U-Boot or the kernel. This option enables a
very simple RAM test that quickly checks whether the SDRAM seems
to work correctly. It is not exhaustive but can save time by
detecting obvious failures.
config MARK_GRAPHICS_MEM_WRCOMB
bool "Mark graphics memory as write-combining."
default n
help
The graphics performance may increase if the graphics
memory is set as write-combining cache type. This option
enables marking the graphics memory as write-combining.
menu "Display"
config FRAMEBUFFER_SET_VESA_MODE
prompt "Set framebuffer graphics resolution"
bool
help
Set VESA/native framebuffer mode (needed for bootsplash and graphical framebuffer console)
choice
prompt "framebuffer graphics resolution"
default FRAMEBUFFER_VESA_MODE_117
depends on FRAMEBUFFER_SET_VESA_MODE
help
This option sets the resolution used for the coreboot framebuffer (and
bootsplash screen).
config FRAMEBUFFER_VESA_MODE_100
bool "640x400 256-color"
config FRAMEBUFFER_VESA_MODE_101
bool "640x480 256-color"
config FRAMEBUFFER_VESA_MODE_102
bool "800x600 16-color"
config FRAMEBUFFER_VESA_MODE_103
bool "800x600 256-color"
config FRAMEBUFFER_VESA_MODE_104
bool "1024x768 16-color"
config FRAMEBUFFER_VESA_MODE_105
bool "1024x7686 256-color"
config FRAMEBUFFER_VESA_MODE_106
bool "1280x1024 16-color"
config FRAMEBUFFER_VESA_MODE_107
bool "1280x1024 256-color"
config FRAMEBUFFER_VESA_MODE_108
bool "80x60 text"
config FRAMEBUFFER_VESA_MODE_109
bool "132x25 text"
config FRAMEBUFFER_VESA_MODE_10A
bool "132x43 text"
config FRAMEBUFFER_VESA_MODE_10B
bool "132x50 text"
config FRAMEBUFFER_VESA_MODE_10C
bool "132x60 text"
config FRAMEBUFFER_VESA_MODE_10D
bool "320x200 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_10E
bool "320x200 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_10F
bool "320x200 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_110
bool "640x480 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_111
bool "640x480 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_112
bool "640x480 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_113
bool "800x600 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_114
bool "800x600 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_115
bool "800x600 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_116
bool "1024x768 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_117
bool "1024x768 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_118
bool "1024x768 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_119
bool "1280x1024 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_11A
bool "1280x1024 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_11B
bool "1280x1024 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_USER
bool "Manually select VESA mode"
endchoice
# Map the config names to an integer (KB).
config FRAMEBUFFER_VESA_MODE
prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER
hex
default 0x100 if FRAMEBUFFER_VESA_MODE_100
default 0x101 if FRAMEBUFFER_VESA_MODE_101
default 0x102 if FRAMEBUFFER_VESA_MODE_102
default 0x103 if FRAMEBUFFER_VESA_MODE_103
default 0x104 if FRAMEBUFFER_VESA_MODE_104
default 0x105 if FRAMEBUFFER_VESA_MODE_105
default 0x106 if FRAMEBUFFER_VESA_MODE_106
default 0x107 if FRAMEBUFFER_VESA_MODE_107
default 0x108 if FRAMEBUFFER_VESA_MODE_108
default 0x109 if FRAMEBUFFER_VESA_MODE_109
default 0x10A if FRAMEBUFFER_VESA_MODE_10A
default 0x10B if FRAMEBUFFER_VESA_MODE_10B
default 0x10C if FRAMEBUFFER_VESA_MODE_10C
default 0x10D if FRAMEBUFFER_VESA_MODE_10D
default 0x10E if FRAMEBUFFER_VESA_MODE_10E
default 0x10F if FRAMEBUFFER_VESA_MODE_10F
default 0x110 if FRAMEBUFFER_VESA_MODE_110
default 0x111 if FRAMEBUFFER_VESA_MODE_111
default 0x112 if FRAMEBUFFER_VESA_MODE_112
default 0x113 if FRAMEBUFFER_VESA_MODE_113
default 0x114 if FRAMEBUFFER_VESA_MODE_114
default 0x115 if FRAMEBUFFER_VESA_MODE_115
default 0x116 if FRAMEBUFFER_VESA_MODE_116
default 0x117 if FRAMEBUFFER_VESA_MODE_117
default 0x118 if FRAMEBUFFER_VESA_MODE_118
default 0x119 if FRAMEBUFFER_VESA_MODE_119
default 0x11A if FRAMEBUFFER_VESA_MODE_11A
default 0x11B if FRAMEBUFFER_VESA_MODE_11B
default 0x117 if FRAMEBUFFER_VESA_MODE_USER
endmenu
source "arch/x86/cpu/ivybridge/Kconfig"
source "board/coreboot/coreboot/Kconfig"
source "board/google/chromebook_link/Kconfig"
endmenu