Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
index b9d2212..98b3f63 100644
--- a/board/freescale/t104xrdb/README
+++ b/board/freescale/t104xrdb/README
@@ -186,15 +186,15 @@
NOR Flash memory Map
---------------------
Start End Definition Size
-0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
-0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
+0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB
+0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB
0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
-0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
-0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
+0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB
+0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB
0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB
@@ -206,7 +206,7 @@
--------------------------------------------------------------
The below commands apply to the board
-1. U-boot environment variable hwconfig
+1. U-Boot environment variable hwconfig
The default hwconfig is:
hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:
dr_mode=host,phy_type=utmi
@@ -228,8 +228,8 @@
----------------------------------
PBL initialise the internal SRAM and copy SPL(160KB) in SRAM.
SPL further initialise DDR using SPD and environment variables and copy
-u-boot(768 KB) from flash to DDR.
-Finally SPL transer control to u-boot for futher booting.
+U-Boot(768 KB) from flash to DDR.
+Finally SPL transer control to U-Boot for futher booting.
SPL has following features:
- Executes within 256K
@@ -250,30 +250,30 @@
-----------------------------------------------
STACK | 0xFFFD8000 (22KB) |
-----------------------------------------------
- U-boot SPL | 0xFFFD8000 (160KB) |
+ U-Boot SPL | 0xFFFD8000 (160KB) |
-----------------------------------------------
NAND Flash memory Map on T104xRDB
------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot 1MB
-0x180000 0x19FFFF u-boot env 128KB
+0x000000 0x0FFFFF U-Boot 1MB
+0x180000 0x19FFFF U-Boot env 128KB
0x280000 0x29FFFF FMAN Ucode 128KB
0x380000 0x39FFFF QE Firmware 128KB
SD Card memory Map on T104xRDB
------------------------------------------
Block #blocks Definition Size
-0x008 2048 u-boot 1MB
-0x800 0024 u-boot env 8KB
+0x008 2048 U-Boot 1MB
+0x800 0024 U-Boot env 8KB
0x820 0256 FMAN Ucode 128KB
0x920 0256 QE Firmware 128KB
SPI Flash memory Map on T104xRDB
------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot 1MB
-0x100000 0x101FFF u-boot env 8KB
+0x000000 0x0FFFFF U-Boot 1MB
+0x100000 0x101FFF U-Boot env 8KB
0x110000 0x12FFFF FMAN Ucode 128KB
0x130000 0x14FFFF QE Firmware 128KB