blob: b9d221200060fd0c42e044d6f15b5cdad7a89f44 [file] [log] [blame]
Priyanka Jain062ef1a2013-10-18 17:19:06 +05301Overview
2--------
3The T1040RDB is a Freescale reference board that hosts the T1040 SoC
4(and variants). Variants inclued T1042 presonality of T1040, in which
5case T1040RDB can also be called T1042RDB.
6
vijay rai363fb322014-08-19 12:46:53 +05307The T1042RDB is a Freescale reference board that hosts the T1042 SoC
8(and variants). The board is similar to T1040RDB, T1040 is a reduced
9personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch).
10
Priyanka Jain0d7ba2e2013-10-18 17:19:23 +053011The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC.
12(a personality of T1040 SoC). The board is similar to T1040RDB but is
13designed specially with low power features targeted for Printing Image Market.
14
Priyanka Jain4b6067a2015-06-05 15:29:02 +053015The T1040D4RDB is a Freescale reference board that hosts the T1040 SoC.
16The board is re-designed T1040RDB board with following changes :
17 - Support of DDR4 memory and some enhancements
18
19The T1042D4RDB is a Freescale reference board that hosts the T1042 SoC.
20The board is re-designed T1040RDB board with following changes :
21 - Support of DDR4 memory
22 - Support for 0x86 serdes protocol which can support following interfaces
23 - 2 RGMII's on DTSEC4, DTSEC5
24 - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3
25
vijay rai363fb322014-08-19 12:46:53 +053026Basic difference's among T1040RDB, T1042RDB_PI, T1042RDB
27-------------------------------------------------------------------------
28Board Si Protocol Targeted Market
29-------------------------------------------------------------------------
30T1040RDB T1040 0x66 Networking
31T1040RDB T1042 0x86 Networking
32T1042RDB_PI T1042 0x06 Printing & Imaging
Priyanka Jain4b6067a2015-06-05 15:29:02 +053033T1040D4RDB T1040 0x66 Networking
34T1042D4RDB T1042 0x86 Networking
vijay rai363fb322014-08-19 12:46:53 +053035
36
Priyanka Jain062ef1a2013-10-18 17:19:06 +053037T1040 SoC Overview
38------------------
39The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
40processor cores with high-performance data path acceleration architecture
41and network peripheral interfaces required for networking & telecommunications.
42
43The T1040/T1042 SoC includes the following function and features:
44
45 - Four e5500 cores, each with a private 256 KB L2 cache
46 - 256 KB shared L3 CoreNet platform cache (CPC)
47 - Interconnect CoreNet platform
48 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
49 support
50 - Data Path Acceleration Architecture (DPAA) incorporating acceleration
51 for the following functions:
52 - Packet parsing, classification, and distribution
53 - Queue management for scheduling, packet sequencing, and congestion
54 management
55 - Cryptography Acceleration (SEC 5.0)
56 - RegEx Pattern Matching Acceleration (PME 2.2)
57 - IEEE Std 1588 support
58 - Hardware buffer management for buffer allocation and deallocation
59 - Ethernet interfaces
60 - Integrated 8-port Gigabit Ethernet switch (T1040 only)
61 - Four 1 Gbps Ethernet controllers
62 - Two RGMII interfaces or one RGMII and one MII interfaces
63 - High speed peripheral interfaces
64 - Four PCI Express 2.0 controllers running at up to 5 GHz
65 - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation
66 - Upto two QSGMII interface
67 - Upto six SGMII interface supporting 1000 Mbps
68 - One SGMII interface supporting upto 2500 Mbps
69 - Additional peripheral interfaces
70 - Two USB 2.0 controllers with integrated PHY
71 - SD/eSDHC/eMMC
72 - eSPI controller
73 - Four I2C controllers
74 - Four UARTs
75 - Four GPIO controllers
76 - Integrated flash controller (IFC)
77 - LCD and HDMI interface (DIU) with 12 bit dual data rate
78 - TDM interface
79 - Multicore programmable interrupt controller (PIC)
80 - Two 8-channel DMA engines
81 - Single source clocking implementation
82 - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
83
84T1040 SoC Personalities
85-------------------------
Priyanka Jain062ef1a2013-10-18 17:19:06 +053086T1022 Personality:
87T1022 is a reduced personality of T1040 with less core/clusters.
88
89T1042 Personality:
90T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit
91Ethernet switch. Rest of the blocks are same as T1040
92
93
94T1040RDB board Overview
95-------------------------
96 - SERDES Connections, 8 lanes information:
97 1: None
98 2: SGMII
99 3: QSGMII
100 4: QSGMII
101 5: PCIe1 x1 slot
102 6: mini PCIe connector
103 7: mini PCIe connector
104 8: SATA connector
105 - DDR Controller
106 - Supports rates of up to 1600 MHz data-rate
107 - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types.
108 - IFC/Local Bus
109 - NAND flash: 1GB 8-bit NAND flash
110 - NOR: 128MB 16-bit NOR Flash
111 - Ethernet
112 - Two on-board RGMII 10/100/1G ethernet ports.
113 - CPLD
114 - Clocks
115 - System and DDR clock (SYSCLK, DDRCLK”)
116 - SERDES clocks
117 - Power Supplies
118 - USB
119 - Supports two USB 2.0 ports with integrated PHYs
120 - Two type A ports with 5V@1.5A per port.
121 - SDHC
122 - SDHC/SDXC connector
123 - SPI
124 - On-board 64MB SPI flash
125 - Other IO
126 - Two Serial ports
127 - Four I2C ports
128
Priyanka Jain0d7ba2e2013-10-18 17:19:23 +0530129T1042RDB_PI board Overview
130-------------------------
131 - SERDES Connections, 8 lanes information:
132 1, 2, 3, 4 : PCIe x4 slot
133 5: mini PCIe connector
134 6: mini PCIe connector
135 7: NA
136 8: SATA connector
137 - DDR Controller
138 - Supports rates of up to 1600 MHz data-rate
139 - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types.
140 - IFC/Local Bus
141 - NAND flash: 1GB 8-bit NAND flash
142 - NOR: 128MB 16-bit NOR Flash
143 - Ethernet
144 - Two on-board RGMII 10/100/1G ethernet ports.
145 - CPLD
146 - Clocks
147 - System and DDR clock (SYSCLK, DDRCLK”)
148 - SERDES clocks
149 - Video
150 - DIU supports video at up to 1280x1024x32bpp
151 - Power Supplies
152 - USB
153 - Supports two USB 2.0 ports with integrated PHYs
154 - Two type A ports with 5V@1.5A per port.
155 - SDHC
156 - SDHC/SDXC connector
157 - SPI
158 - On-board 64MB SPI flash
159 - Other IO
160 - Two Serial ports
161 - Four I2C ports
162
Priyanka Jain062ef1a2013-10-18 17:19:06 +0530163Memory map
164-----------
165The addresses in brackets are physical addresses.
166
167Start Address End Address Description Size
1680xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
1690xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
1700xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
1710xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
1720xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
1730xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
1740xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
1750xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB
1760xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB
1770xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB
1780xF_0000_0000 0xF_003F_FFFF DCSR 4MB
1790xC_3000_0000 0xC_3FFF_FFFF PCI Express 4 Mem Space 256MB
1800xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB
1810xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB
1820xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB
1830x0_0000_0000 0x0_ffff_ffff DDR 2GB
184
185
186NOR Flash memory Map
187---------------------
188 Start End Definition Size
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +05301890xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
1900xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
1910xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
Prabhakar Kushwahae7222b52014-01-25 12:11:23 +05301920xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
1930xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
Priyanka Jain062ef1a2013-10-18 17:19:06 +05301940xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
1950xEC000000 0xEC01FFFF RCW (alt bank) 128KB
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +05301960xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
1970xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
1980xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
Prabhakar Kushwahae7222b52014-01-25 12:11:23 +05301990xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
Priyanka Jain062ef1a2013-10-18 17:19:06 +05302000xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB
2010xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
2020xE8000000 0xE801FFFF RCW (current bank) 128KB
203
204
205Various Software configurations/environment variables/commands
206--------------------------------------------------------------
207The below commands apply to the board
208
2091. U-boot environment variable hwconfig
210 The default hwconfig is:
211 hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:
212 dr_mode=host,phy_type=utmi
213 Note: For USB gadget set "dr_mode=peripheral"
214
2152. FMAN Ucode versions
216 fsl_fman_ucode_t1040.bin
217
2183. Switching to alternate bank
219 Commands for switching to alternate bank.
220
221 1. To change from vbank0 to vbank4
vijay rai363fb322014-08-19 12:46:53 +0530222 => cpld reset altbank (it will boot using vbank4)
Priyanka Jain062ef1a2013-10-18 17:19:06 +0530223
224 2.To change from vbank4 to vbank0
vijay rai363fb322014-08-19 12:46:53 +0530225 => cpld reset (it will boot using vbank0)
Prabhakar Kushwaha18c01442014-04-08 19:13:56 +0530226
227NAND boot with 2 Stage boot loader
228----------------------------------
229PBL initialise the internal SRAM and copy SPL(160KB) in SRAM.
230SPL further initialise DDR using SPD and environment variables and copy
231u-boot(768 KB) from flash to DDR.
232Finally SPL transer control to u-boot for futher booting.
233
234SPL has following features:
235 - Executes within 256K
236 - No relocation required
237
238 Run time view of SPL framework during boot :-
239 -----------------------------------------------
240 Area | Address |
241-----------------------------------------------
242 Secure boot | 0xFFFC0000 (32KB) |
243 headers | |
244 -----------------------------------------------
245 GD, BD | 0xFFFC8000 (4KB) |
246 -----------------------------------------------
247 ENV | 0xFFFC9000 (8KB) |
248 -----------------------------------------------
249 HEAP | 0xFFFCB000 (30KB) |
250 -----------------------------------------------
251 STACK | 0xFFFD8000 (22KB) |
252 -----------------------------------------------
253 U-boot SPL | 0xFFFD8000 (160KB) |
254 -----------------------------------------------
255
256NAND Flash memory Map on T104xRDB
257------------------------------------------
258 Start End Definition Size
2590x000000 0x0FFFFF u-boot 1MB
2600x180000 0x19FFFF u-boot env 128KB
2610x280000 0x29FFFF FMAN Ucode 128KB
2620x380000 0x39FFFF QE Firmware 128KB
263
264SD Card memory Map on T104xRDB
265------------------------------------------
266 Block #blocks Definition Size
2670x008 2048 u-boot 1MB
2680x800 0024 u-boot env 8KB
2690x820 0256 FMAN Ucode 128KB
2700x920 0256 QE Firmware 128KB
271
272SPI Flash memory Map on T104xRDB
273------------------------------------------
274 Start End Definition Size
2750x000000 0x0FFFFF u-boot 1MB
2760x100000 0x101FFF u-boot env 8KB
2770x110000 0x12FFFF FMAN Ucode 128KB
2780x130000 0x14FFFF QE Firmware 128KB
279
280Please note QE Firmware is only valid for T1040RDB
281
282
Priyanka Jain4b6067a2015-06-05 15:29:02 +0530283Switch Settings for T104xRDB boards: (ON is 0, OFF is 1)
284==========================================================
285NOR boot SW setting:
286SW1: 00010011
287SW2: 10111011
288SW3: 11100001
289
Prabhakar Kushwaha18c01442014-04-08 19:13:56 +0530290NAND boot SW setting:
291SW1: 10001000
Priyanka Jain92f7fed2014-09-05 15:18:31 +0530292SW2: 00111011
Prabhakar Kushwaha18c01442014-04-08 19:13:56 +0530293SW3: 11110001
294
295SPI boot SW setting:
296SW1: 00100010
Priyanka Jain92f7fed2014-09-05 15:18:31 +0530297SW2: 10111011
Prabhakar Kushwaha18c01442014-04-08 19:13:56 +0530298SW3: 11100001
299
300SD boot SW setting:
301SW1: 00100000
Priyanka Jain92f7fed2014-09-05 15:18:31 +0530302SW2: 00111011
Prabhakar Kushwaha18c01442014-04-08 19:13:56 +0530303SW3: 11100001
Priyanka Jain4b6067a2015-06-05 15:29:02 +0530304
305Switch Settings for T104xD4RDB boards: (ON is 0, OFF is 1)
306=============================================================
307NOR boot SW setting:
308SW1: 00010011
309SW2: 10111001
310SW3: 11100001
311
312NAND boot SW setting:
313SW1: 10001000
314SW2: 00111001
315SW3: 11110001
316
317SPI boot SW setting:
318SW1: 00100010
319SW2: 10111001
320SW3: 11100001
321
322SD boot SW setting:
323SW1: 00100000
324SW2: 00111001
325SW3: 11100001
326
327PBL-based image generation
328==========================
329Changes only the required register bit in in PBI commands.
330
331Provides reference code which might needs some
332modification as per requirement.
333example:
334By default PBI_SRC=14 (which is for IFC-NAND/NOR) in rcw.cfg file
335which needs to be changed for SPI and SD.
336
337For SD-boot
338==============
3391. Set RCW[192:195], PBI_SRC bits as 6 in RCW file (t1040d4_rcw.cfg type files)
340
341example:
342 RCW file: board/freescale/t104xrdb/t1040d4_rcw.cfg
343
344Change
34566000002 40000002 ec027000 01000000
346to
34766000002 40000002 6c027000 01000000
348
3492. SD does not support flush so remove flush from pbl, make changes in
350 tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000
351 with 0x091380c0
352
353For SPI-boot
354==============
3551. Set RCW[192:195], PBI_SRC bits as 5 in RCW file (t1040d4_rcw.cfg type files)
356
357example:
358 RCW file: board/freescale/t104xrdb/t1040d4_rcw.cfg
359
360Change
36166000002 40000002 ec027000 01000000
362to
36366000002 40000002 5c027000 01000000
364
3652. SPI does not support flush so remove flush from pbl, make changes in
366 tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000
367 with 0x091380c0