| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> |
| * |
| * Based on dockstar.h originally written by |
| * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> |
| * |
| * Based on sheevaplug.h originally written by |
| * Prafulla Wadaskar <prafulla@marvell.com> |
| * (C) Copyright 2009 |
| * Marvell Semiconductor <www.marvell.com> |
| */ |
| |
| #ifndef _CONFIG_GOFLEXHOME_H |
| #define _CONFIG_GOFLEXHOME_H |
| |
| /* |
| * High Level Configuration Options (easy to change) |
| */ |
| #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ |
| #define CONFIG_KW88F6281 1 /* SOC Name */ |
| |
| /* |
| * Default GPIO configuration and LED status |
| */ |
| #define GOFLEXHOME_OE_LOW (~(0)) |
| #define GOFLEXHOME_OE_HIGH (~(0)) |
| #define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ |
| #define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ |
| |
| /* PHY related */ |
| #define MV88E1116_LED_FCTRL_REG 10 |
| #define MV88E1116_CPRSP_CR3_REG 21 |
| #define MV88E1116_MAC_CTRL_REG 21 |
| #define MV88E1116_PGADR_REG 22 |
| #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) |
| #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) |
| |
| #include "mv-common.h" |
| |
| /* |
| * Environment variables configurations |
| */ |
| /* |
| * max 4k env size is enough, but in case of nand |
| * it has to be rounded to sector size |
| */ |
| |
| /* |
| * Default environment variables |
| */ |
| #define CONFIG_BOOTCOMMAND \ |
| "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ |
| "ubi part root; " \ |
| "ubifsmount ubi:root; " \ |
| "ubifsload 0x800000 ${kernel}; " \ |
| "bootm 0x800000" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "console=console=ttyS0,115200\0" \ |
| "mtdids=nand0=orion_nand\0" \ |
| "mtdparts="CONFIG_MTDPARTS_DEFAULT \ |
| "kernel=/boot/uImage\0" \ |
| "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" |
| |
| /* |
| * Ethernet Driver configuration |
| */ |
| #ifdef CONFIG_CMD_NET |
| #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ |
| #define CONFIG_PHY_BASE_ADR 0 |
| #endif /* CONFIG_CMD_NET */ |
| |
| /* SATA driver configuration */ |
| #ifdef CONFIG_SATA |
| #define CONFIG_SYS_SATA_MAX_DEVICE 1 |
| #define CONFIG_LBA48 |
| #endif /* CONFIG_SATA */ |
| |
| #endif /* _CONFIG_GOFLEXHOME_H */ |