blob: aada83f1902a683743ad18dd4954090d3e1ab194 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2014-2016 Stefan Roese <sr@denx.de>
*/
#include <common.h>
#include <dm.h>
#include <fdtdec.h>
#include <hang.h>
#include <image.h>
#include <init.h>
#include <log.h>
#include <spl.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT) || defined(CONFIG_SPL_MMC) || \
defined(CONFIG_SPL_SATA)
/*
* When loading U-Boot via SPL from SPI NOR, CONFIG_SYS_SPI_U_BOOT_OFFS must
* point to the offset of kwbimage main header which is always at offset zero
* (defined by BootROM). Therefore other values of CONFIG_SYS_SPI_U_BOOT_OFFS
* makes U-Boot non-bootable.
*/
#ifdef CONFIG_SPL_SPI_FLASH_SUPPORT
#if defined(CONFIG_SYS_SPI_U_BOOT_OFFS) && CONFIG_SYS_SPI_U_BOOT_OFFS != 0
#error CONFIG_SYS_SPI_U_BOOT_OFFS must be set to 0
#endif
#endif
/*
* When loading U-Boot via SPL from eMMC (in Marvell terminology SDIO), the
* kwbimage main header is stored at sector 0. U-Boot SPL needs to parse this
* header and figure out at which sector the U-Boot proper binary is stored.
* Partition booting is therefore not supported and CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
* and CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET need to point to the
* kwbimage main header.
*/
#ifdef CONFIG_SPL_MMC
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
#error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION is unsupported
#endif
#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR) && CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR != 0
#error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR must be set to 0
#endif
#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET) && CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET != 0
#error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET must be set to 0
#endif
#endif
/*
* When loading U-Boot via SPL from SATA disk, the kwbimage main header is
* stored at sector 1. Therefore CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be
* set to 1. Otherwise U-Boot SPL would not be able to load U-Boot proper.
*/
#ifdef CONFIG_SPL_SATA
#if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || !defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
#error CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be set to 1
#endif
#endif
/* Boot Type - block ID */
#define IBR_HDR_I2C_ID 0x4D
#define IBR_HDR_SPI_ID 0x5A
#define IBR_HDR_NAND_ID 0x8B
#define IBR_HDR_SATA_ID 0x78
#define IBR_HDR_PEX_ID 0x9C
#define IBR_HDR_UART_ID 0x69
#define IBR_HDR_SDIO_ID 0xAE
/* Structure of the main header, version 1 (Armada 370/XP/375/38x/39x) */
struct kwbimage_main_hdr_v1 {
uint8_t blockid; /* 0x0 */
uint8_t flags; /* 0x1 */
uint16_t nandpagesize; /* 0x2-0x3 */
uint32_t blocksize; /* 0x4-0x7 */
uint8_t version; /* 0x8 */
uint8_t headersz_msb; /* 0x9 */
uint16_t headersz_lsb; /* 0xA-0xB */
uint32_t srcaddr; /* 0xC-0xF */
uint32_t destaddr; /* 0x10-0x13 */
uint32_t execaddr; /* 0x14-0x17 */
uint8_t options; /* 0x18 */
uint8_t nandblocksize; /* 0x19 */
uint8_t nandbadblklocation; /* 0x1A */
uint8_t reserved4; /* 0x1B */
uint16_t reserved5; /* 0x1C-0x1D */
uint8_t ext; /* 0x1E */
uint8_t checksum; /* 0x1F */
} __packed;
#ifdef CONFIG_SPL_MMC
u32 spl_mmc_boot_mode(const u32 boot_device)
{
return MMCSD_MODE_RAW;
}
#endif
int spl_parse_board_header(struct spl_image_info *spl_image,
const void *image_header, size_t size)
{
const struct kwbimage_main_hdr_v1 *mhdr = image_header;
if (size < sizeof(*mhdr)) {
/* This should be compile time assert */
printf("FATAL ERROR: Image header size is too small\n");
hang();
}
/*
* Very basic check for image validity. We cannot check mhdr->checksum
* as it is calculated also from variable length extended headers
* (including SPL content) which is not included in U-Boot image_header.
*/
if (mhdr->version != 1 ||
((mhdr->headersz_msb << 16) | mhdr->headersz_lsb) < sizeof(*mhdr) ||
(
#ifdef CONFIG_SPL_SPI_FLASH_SUPPORT
mhdr->blockid != IBR_HDR_SPI_ID &&
#endif
#ifdef CONFIG_SPL_SATA
mhdr->blockid != IBR_HDR_SATA_ID &&
#endif
#ifdef CONFIG_SPL_MMC
mhdr->blockid != IBR_HDR_SDIO_ID &&
#endif
1
)) {
printf("ERROR: Not valid SPI/NAND/SATA/SDIO kwbimage v1\n");
return -EINVAL;
}
spl_image->offset = mhdr->srcaddr;
#ifdef CONFIG_SPL_SATA
/*
* For SATA srcaddr is specified in number of sectors.
* The main header is must be stored at sector number 1.
* This expects that sector size is 512 bytes and recalculates
* data offset to bytes relative to the main header.
*/
if (mhdr->blockid == IBR_HDR_SATA_ID) {
if (spl_image->offset < 1) {
printf("ERROR: Wrong SATA srcaddr in kwbimage\n");
return -EINVAL;
}
spl_image->offset -= 1;
spl_image->offset *= 512;
}
#endif
#ifdef CONFIG_SPL_MMC
/*
* For SDIO (eMMC) srcaddr is specified in number of sectors.
* This expects that sector size is 512 bytes and recalculates
* data offset to bytes.
*/
if (mhdr->blockid == IBR_HDR_SDIO_ID)
spl_image->offset *= 512;
#endif
spl_image->size = mhdr->blocksize;
spl_image->entry_point = mhdr->execaddr;
spl_image->load_addr = mhdr->destaddr;
spl_image->os = IH_OS_U_BOOT;
spl_image->name = "U-Boot";
return 0;
}
u32 spl_boot_device(void)
{
u32 boot_device = get_boot_device();
switch (boot_device) {
/*
* Return to the BootROM to continue the Marvell xmodem
* UART boot protocol. As initiated by the kwboot tool.
*
* This can only be done by the BootROM since the beginning
* of the image is already read and interpreted by the BootROM.
* SPL has no chance to receive this information. So we
* need to return to the BootROM to enable this xmodem
* UART download. Use SPL infrastructure to return to BootROM.
*/
case BOOT_DEVICE_UART:
return BOOT_DEVICE_BOOTROM;
/*
* If SPL is compiled with chosen boot_device support
* then use SPL driver for loading U-Boot proper.
*/
#ifdef CONFIG_SPL_MMC
case BOOT_DEVICE_MMC1:
return BOOT_DEVICE_MMC1;
#endif
#ifdef CONFIG_SPL_SATA
case BOOT_DEVICE_SATA:
return BOOT_DEVICE_SATA;
#endif
#ifdef CONFIG_SPL_SPI_FLASH_SUPPORT
case BOOT_DEVICE_SPI:
return BOOT_DEVICE_SPI;
#endif
/*
* If SPL is not compiled with chosen boot_device support
* then return to the BootROM. BootROM supports loading
* U-Boot proper from any valid boot_device present in SAR
* register.
*/
default:
return BOOT_DEVICE_BOOTROM;
}
}
#else
u32 spl_boot_device(void)
{
return BOOT_DEVICE_BOOTROM;
}
#endif
int board_return_to_bootrom(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
{
u32 *regs = *(u32 **)CONFIG_SPL_BOOTROM_SAVE;
printf("Returning to BootROM (return address 0x%08x)...\n", regs[13]);
return_to_bootrom();
/* NOTREACHED - return_to_bootrom() does not return */
hang();
}
void board_init_f(ulong dummy)
{
int ret;
/*
* Pin muxing needs to be done before UART output, since
* on A38x the UART pins need some re-muxing for output
* to work.
*/
board_early_init_f();
/*
* Use special translation offset for SPL. This needs to be
* configured *before* spl_init() is called as this function
* calls dm_init() which calls the bind functions of the
* device drivers. Here the base address needs to be configured
* (translated) correctly.
*/
gd->translation_offset = 0xd0000000 - 0xf1000000;
ret = spl_init();
if (ret) {
printf("spl_init() failed: %d\n", ret);
hang();
}
preloader_console_init();
timer_init();
/* Armada 375 does not support SerDes and DDR3 init yet */
#if !defined(CONFIG_ARMADA_375)
/* First init the serdes PHY's */
serdes_phy_config();
/* Setup DDR */
ret = ddr3_init();
if (ret) {
printf("ddr3_init() failed: %d\n", ret);
hang();
}
#endif
/* Initialize Auto Voltage Scaling */
mv_avs_init();
/* Update read timing control for PCIe */
mv_rtc_config();
}