blob: b2bfb529cc8062327c37993daced4433cc3f42db [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Compatible code for non CCF AT91 platforms.
*
* Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries
*
* Author: Claudiu Beznea <claudiu.beznea@microchip.com>
*/
#include <common.h>
#include <clk-uclass.h>
#include <dm.h>
#include <asm/global_data.h>
#include <dm/device_compat.h>
#include <dm/lists.h>
#include <dm/util.h>
#include <mach/at91_pmc.h>
#include <mach/at91_sfr.h>
#include <regmap.h>
#include <syscon.h>
#include "pmc.h"
DECLARE_GLOBAL_DATA_PTR;
struct pmc_plat {
struct at91_pmc *reg_base;
struct regmap *regmap_sfr;
};
static const struct udevice_id at91_pmc_match[] = {
{ .compatible = "atmel,at91rm9200-pmc" },
{ .compatible = "atmel,at91sam9260-pmc" },
{ .compatible = "atmel,at91sam9g45-pmc" },
{ .compatible = "atmel,at91sam9n12-pmc" },
{ .compatible = "atmel,at91sam9x5-pmc" },
{ .compatible = "atmel,sama5d3-pmc" },
{ .compatible = "atmel,sama5d2-pmc" },
{}
};
U_BOOT_DRIVER(at91_pmc) = {
.name = "at91-pmc",
.id = UCLASS_SIMPLE_BUS,
.of_match = at91_pmc_match,
};
static int at91_pmc_core_probe(struct udevice *dev)
{
struct pmc_plat *plat = dev_get_plat(dev);
dev = dev_get_parent(dev);
plat->reg_base = dev_read_addr_ptr(dev);
return 0;
}
/**
* at91_clk_sub_device_bind() - for the at91 clock driver
* Recursively bind its children as clk devices.
*
* @return: 0 on success, or negative error code on failure
*/
int at91_clk_sub_device_bind(struct udevice *dev, const char *drv_name)
{
const void *fdt = gd->fdt_blob;
int offset = dev_of_offset(dev);
bool pre_reloc_only = !(gd->flags & GD_FLG_RELOC);
const char *name;
int ret;
for (offset = fdt_first_subnode(fdt, offset);
offset > 0;
offset = fdt_next_subnode(fdt, offset)) {
if (pre_reloc_only &&
!ofnode_pre_reloc(offset_to_ofnode(offset)))
continue;
/*
* If this node has "compatible" property, this is not
* a clock sub-node, but a normal device. skip.
*/
fdt_get_property(fdt, offset, "compatible", &ret);
if (ret >= 0)
continue;
if (ret != -FDT_ERR_NOTFOUND)
return ret;
name = fdt_get_name(fdt, offset, NULL);
if (!name)
return -EINVAL;
ret = device_bind_driver_to_node(dev, drv_name, name,
offset_to_ofnode(offset), NULL);
if (ret)
return ret;
}
return 0;
}
int at91_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args)
{
int periph;
if (args->args_count) {
debug("Invalid args_count: %d\n", args->args_count);
return -EINVAL;
}
periph = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(clk->dev), "reg",
-1);
if (periph < 0)
return -EINVAL;
clk->id = periph;
return 0;
}
int at91_clk_probe(struct udevice *dev)
{
struct udevice *dev_periph_container, *dev_pmc;
struct pmc_plat *plat = dev_get_plat(dev);
dev_periph_container = dev_get_parent(dev);
dev_pmc = dev_get_parent(dev_periph_container);
plat->reg_base = dev_read_addr_ptr(dev_pmc);
return 0;
}
/* SCKC specific code. */
static const struct udevice_id at91_sckc_match[] = {
{ .compatible = "atmel,at91sam9x5-sckc" },
{}
};
U_BOOT_DRIVER(at91_sckc) = {
.name = "at91-sckc",
.id = UCLASS_SIMPLE_BUS,
.of_match = at91_sckc_match,
};
/* Slow clock specific code. */
static int at91_slow_clk_enable(struct clk *clk)
{
return 0;
}
static ulong at91_slow_clk_get_rate(struct clk *clk)
{
return CONFIG_SYS_AT91_SLOW_CLOCK;
}
static struct clk_ops at91_slow_clk_ops = {
.enable = at91_slow_clk_enable,
.get_rate = at91_slow_clk_get_rate,
};
static const struct udevice_id at91_slow_clk_match[] = {
{ .compatible = "atmel,at91sam9x5-clk-slow" },
{}
};
U_BOOT_DRIVER(at91_slow_clk) = {
.name = "at91-slow-clk",
.id = UCLASS_CLK,
.of_match = at91_slow_clk_match,
.ops = &at91_slow_clk_ops,
};
/* Master clock specific code. */
static ulong at91_master_clk_get_rate(struct clk *clk)
{
return gd->arch.mck_rate_hz;
}
static struct clk_ops at91_master_clk_ops = {
.get_rate = at91_master_clk_get_rate,
};
static const struct udevice_id at91_master_clk_match[] = {
{ .compatible = "atmel,at91rm9200-clk-master" },
{ .compatible = "atmel,at91sam9x5-clk-master" },
{}
};
U_BOOT_DRIVER(at91_master_clk) = {
.name = "at91-master-clk",
.id = UCLASS_CLK,
.of_match = at91_master_clk_match,
.ops = &at91_master_clk_ops,
};
/* Main osc clock specific code. */
static int main_osc_clk_enable(struct clk *clk)
{
struct pmc_plat *plat = dev_get_plat(clk->dev);
struct at91_pmc *pmc = plat->reg_base;
if (readl(&pmc->sr) & AT91_PMC_MOSCSELS)
return 0;
return -EINVAL;
}
static ulong main_osc_clk_get_rate(struct clk *clk)
{
return gd->arch.main_clk_rate_hz;
}
static struct clk_ops main_osc_clk_ops = {
.enable = main_osc_clk_enable,
.get_rate = main_osc_clk_get_rate,
};
static int main_osc_clk_probe(struct udevice *dev)
{
return at91_pmc_core_probe(dev);
}
static const struct udevice_id main_osc_clk_match[] = {
{ .compatible = "atmel,at91sam9x5-clk-main" },
{}
};
U_BOOT_DRIVER(at91sam9x5_main_osc_clk) = {
.name = "at91sam9x5-main-osc-clk",
.id = UCLASS_CLK,
.of_match = main_osc_clk_match,
.probe = main_osc_clk_probe,
.plat_auto = sizeof(struct pmc_plat),
.ops = &main_osc_clk_ops,
};
/* PLLA clock specific code. */
static int plla_clk_enable(struct clk *clk)
{
struct pmc_plat *plat = dev_get_plat(clk->dev);
struct at91_pmc *pmc = plat->reg_base;
if (readl(&pmc->sr) & AT91_PMC_LOCKA)
return 0;
return -EINVAL;
}
static ulong plla_clk_get_rate(struct clk *clk)
{
return gd->arch.plla_rate_hz;
}
static struct clk_ops plla_clk_ops = {
.enable = plla_clk_enable,
.get_rate = plla_clk_get_rate,
};
static int plla_clk_probe(struct udevice *dev)
{
return at91_pmc_core_probe(dev);
}
static const struct udevice_id plla_clk_match[] = {
{ .compatible = "atmel,sama5d3-clk-pll" },
{}
};
U_BOOT_DRIVER(at91_plla_clk) = {
.name = "at91-plla-clk",
.id = UCLASS_CLK,
.of_match = plla_clk_match,
.probe = plla_clk_probe,
.plat_auto = sizeof(struct pmc_plat),
.ops = &plla_clk_ops,
};
/* PLLA DIV clock specific code. */
static int at91_plladiv_clk_enable(struct clk *clk)
{
return 0;
}
static ulong at91_plladiv_clk_get_rate(struct clk *clk)
{
struct pmc_plat *plat = dev_get_plat(clk->dev);
struct at91_pmc *pmc = plat->reg_base;
struct clk source;
ulong clk_rate;
int ret;
ret = clk_get_by_index(clk->dev, 0, &source);
if (ret)
return -EINVAL;
clk_rate = clk_get_rate(&source);
if (readl(&pmc->mckr) & AT91_PMC_MCKR_PLLADIV_2)
clk_rate /= 2;
return clk_rate;
}
static ulong at91_plladiv_clk_set_rate(struct clk *clk, ulong rate)
{
struct pmc_plat *plat = dev_get_plat(clk->dev);
struct at91_pmc *pmc = plat->reg_base;
struct clk source;
ulong parent_rate;
int ret;
ret = clk_get_by_index(clk->dev, 0, &source);
if (ret)
return -EINVAL;
parent_rate = clk_get_rate(&source);
if ((parent_rate != rate) && ((parent_rate) / 2 != rate))
return -EINVAL;
if (parent_rate != rate) {
writel((readl(&pmc->mckr) | AT91_PMC_MCKR_PLLADIV_2),
&pmc->mckr);
}
return 0;
}
static struct clk_ops at91_plladiv_clk_ops = {
.enable = at91_plladiv_clk_enable,
.get_rate = at91_plladiv_clk_get_rate,
.set_rate = at91_plladiv_clk_set_rate,
};
static int at91_plladiv_clk_probe(struct udevice *dev)
{
return at91_pmc_core_probe(dev);
}
static const struct udevice_id at91_plladiv_clk_match[] = {
{ .compatible = "atmel,at91sam9x5-clk-plldiv" },
{}
};
U_BOOT_DRIVER(at91_plladiv_clk) = {
.name = "at91-plladiv-clk",
.id = UCLASS_CLK,
.of_match = at91_plladiv_clk_match,
.probe = at91_plladiv_clk_probe,
.plat_auto = sizeof(struct pmc_plat),
.ops = &at91_plladiv_clk_ops,
};
/* System clock specific code. */
#define SYSTEM_MAX_ID 31
/**
* at91_system_clk_bind() - for the system clock driver
* Recursively bind its children as clk devices.
*
* @return: 0 on success, or negative error code on failure
*/
static int at91_system_clk_bind(struct udevice *dev)
{
return at91_clk_sub_device_bind(dev, "system-clk");
}
static const struct udevice_id at91_system_clk_match[] = {
{ .compatible = "atmel,at91rm9200-clk-system" },
{}
};
U_BOOT_DRIVER(at91_system_clk) = {
.name = "at91-system-clk",
.id = UCLASS_MISC,
.of_match = at91_system_clk_match,
.bind = at91_system_clk_bind,
};
static inline int is_pck(int id)
{
return (id >= 8) && (id <= 15);
}
static ulong system_clk_get_rate(struct clk *clk)
{
struct clk clk_dev;
int ret;
ret = clk_get_by_index(clk->dev, 0, &clk_dev);
if (ret)
return -EINVAL;
return clk_get_rate(&clk_dev);
}
static ulong system_clk_set_rate(struct clk *clk, ulong rate)
{
struct clk clk_dev;
int ret;
ret = clk_get_by_index(clk->dev, 0, &clk_dev);
if (ret)
return -EINVAL;
return clk_set_rate(&clk_dev, rate);
}
static int system_clk_enable(struct clk *clk)
{
struct pmc_plat *plat = dev_get_plat(clk->dev);
struct at91_pmc *pmc = plat->reg_base;
u32 mask;
if (clk->id > SYSTEM_MAX_ID)
return -EINVAL;
mask = BIT(clk->id);
writel(mask, &pmc->scer);
/**
* For the programmable clocks the Ready status in the PMC
* status register should be checked after enabling.
* For other clocks this is unnecessary.
*/
if (!is_pck(clk->id))
return 0;
while (!(readl(&pmc->sr) & mask))
;
return 0;
}
static struct clk_ops system_clk_ops = {
.of_xlate = at91_clk_of_xlate,
.get_rate = system_clk_get_rate,
.set_rate = system_clk_set_rate,
.enable = system_clk_enable,
};
U_BOOT_DRIVER(system_clk) = {
.name = "system-clk",
.id = UCLASS_CLK,
.probe = at91_clk_probe,
.plat_auto = sizeof(struct pmc_plat),
.ops = &system_clk_ops,
};
/* Peripheral clock specific code. */
#define PERIPHERAL_ID_MIN 2
#define PERIPHERAL_ID_MAX 31
#define PERIPHERAL_MASK(id) (1 << ((id) & PERIPHERAL_ID_MAX))
enum periph_clk_type {
CLK_PERIPH_AT91RM9200 = 0,
CLK_PERIPH_AT91SAM9X5,
};
/**
* sam9x5_periph_clk_bind() - for the periph clock driver
* Recursively bind its children as clk devices.
*
* @return: 0 on success, or negative error code on failure
*/
static int sam9x5_periph_clk_bind(struct udevice *dev)
{
return at91_clk_sub_device_bind(dev, "periph-clk");
}
static const struct udevice_id sam9x5_periph_clk_match[] = {
{
.compatible = "atmel,at91rm9200-clk-peripheral",
.data = CLK_PERIPH_AT91RM9200,
},
{
.compatible = "atmel,at91sam9x5-clk-peripheral",
.data = CLK_PERIPH_AT91SAM9X5,
},
{}
};
U_BOOT_DRIVER(sam9x5_periph_clk) = {
.name = "sam9x5-periph-clk",
.id = UCLASS_MISC,
.of_match = sam9x5_periph_clk_match,
.bind = sam9x5_periph_clk_bind,
};
static int periph_clk_enable(struct clk *clk)
{
struct pmc_plat *plat = dev_get_plat(clk->dev);
struct at91_pmc *pmc = plat->reg_base;
enum periph_clk_type clk_type;
void *addr;
if (clk->id < PERIPHERAL_ID_MIN)
return -1;
clk_type = dev_get_driver_data(dev_get_parent(clk->dev));
if (clk_type == CLK_PERIPH_AT91RM9200) {
addr = &pmc->pcer;
if (clk->id > PERIPHERAL_ID_MAX)
addr = &pmc->pcer1;
setbits_le32(addr, PERIPHERAL_MASK(clk->id));
} else {
writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
setbits_le32(&pmc->pcr,
AT91_PMC_PCR_CMD_WRITE | AT91_PMC_PCR_EN);
}
return 0;
}
static ulong periph_get_rate(struct clk *clk)
{
struct udevice *dev;
struct clk clk_dev;
ulong clk_rate;
int ret;
dev = dev_get_parent(clk->dev);
ret = clk_get_by_index(dev, 0, &clk_dev);
if (ret)
return ret;
clk_rate = clk_get_rate(&clk_dev);
clk_free(&clk_dev);
return clk_rate;
}
static struct clk_ops periph_clk_ops = {
.of_xlate = at91_clk_of_xlate,
.enable = periph_clk_enable,
.get_rate = periph_get_rate,
};
U_BOOT_DRIVER(clk_periph) = {
.name = "periph-clk",
.id = UCLASS_CLK,
.plat_auto = sizeof(struct pmc_plat),
.probe = at91_clk_probe,
.ops = &periph_clk_ops,
};
/* UTMI clock specific code. */
#ifdef CONFIG_AT91_UTMI
/*
* The purpose of this clock is to generate a 480 MHz signal. A different
* rate can't be configured.
*/
#define UTMI_RATE 480000000
static int utmi_clk_enable(struct clk *clk)
{
struct pmc_plat *plat = dev_get_plat(clk->dev);
struct at91_pmc *pmc = plat->reg_base;
struct clk clk_dev;
ulong clk_rate;
u32 utmi_ref_clk_freq;
u32 tmp;
int err;
int timeout = 2000000;
if (readl(&pmc->sr) & AT91_PMC_LOCKU)
return 0;
/*
* If mainck rate is different from 12 MHz, we have to configure the
* FREQ field of the SFR_UTMICKTRIM register to generate properly
* the utmi clock.
*/
err = clk_get_by_index(clk->dev, 0, &clk_dev);
if (err)
return -EINVAL;
clk_rate = clk_get_rate(&clk_dev);
switch (clk_rate) {
case 12000000:
utmi_ref_clk_freq = 0;
break;
case 16000000:
utmi_ref_clk_freq = 1;
break;
case 24000000:
utmi_ref_clk_freq = 2;
break;
/*
* Not supported on SAMA5D2 but it's not an issue since MAINCK
* maximum value is 24 MHz.
*/
case 48000000:
utmi_ref_clk_freq = 3;
break;
default:
printf("UTMICK: unsupported mainck rate\n");
return -EINVAL;
}
if (plat->regmap_sfr) {
err = regmap_read(plat->regmap_sfr, AT91_SFR_UTMICKTRIM, &tmp);
if (err)
return -EINVAL;
tmp &= ~AT91_UTMICKTRIM_FREQ;
tmp |= utmi_ref_clk_freq;
err = regmap_write(plat->regmap_sfr, AT91_SFR_UTMICKTRIM, tmp);
if (err)
return -EINVAL;
} else if (utmi_ref_clk_freq) {
printf("UTMICK: sfr node required\n");
return -EINVAL;
}
tmp = readl(&pmc->uckr);
tmp |= AT91_PMC_UPLLEN |
AT91_PMC_UPLLCOUNT |
AT91_PMC_BIASEN;
writel(tmp, &pmc->uckr);
while ((--timeout) && !(readl(&pmc->sr) & AT91_PMC_LOCKU))
;
if (!timeout) {
printf("UTMICK: timeout waiting for UPLL lock\n");
return -ETIMEDOUT;
}
return 0;
}
static ulong utmi_clk_get_rate(struct clk *clk)
{
/* UTMI clk rate is fixed. */
return UTMI_RATE;
}
static struct clk_ops utmi_clk_ops = {
.enable = utmi_clk_enable,
.get_rate = utmi_clk_get_rate,
};
static int utmi_clk_of_to_plat(struct udevice *dev)
{
struct pmc_plat *plat = dev_get_plat(dev);
struct udevice *syscon;
uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
"regmap-sfr", &syscon);
if (syscon)
plat->regmap_sfr = syscon_get_regmap(syscon);
return 0;
}
static int utmi_clk_probe(struct udevice *dev)
{
return at91_pmc_core_probe(dev);
}
static const struct udevice_id utmi_clk_match[] = {
{ .compatible = "atmel,at91sam9x5-clk-utmi" },
{}
};
U_BOOT_DRIVER(at91sam9x5_utmi_clk) = {
.name = "at91sam9x5-utmi-clk",
.id = UCLASS_CLK,
.of_match = utmi_clk_match,
.probe = utmi_clk_probe,
.of_to_plat = utmi_clk_of_to_plat,
.plat_auto = sizeof(struct pmc_plat),
.ops = &utmi_clk_ops,
};
#endif /* CONFIG_AT91_UTMI */
/* H32MX clock specific code. */
#ifdef CONFIG_AT91_H32MX
#define H32MX_MAX_FREQ 90000000
static ulong sama5d4_h32mx_clk_get_rate(struct clk *clk)
{
struct pmc_plat *plat = dev_get_plat(clk->dev);
struct at91_pmc *pmc = plat->reg_base;
ulong rate = gd->arch.mck_rate_hz;
if (readl(&pmc->mckr) & AT91_PMC_MCKR_H32MXDIV)
rate /= 2;
if (rate > H32MX_MAX_FREQ)
dev_dbg(clk->dev, "H32MX clock is too fast\n");
return rate;
}
static struct clk_ops sama5d4_h32mx_clk_ops = {
.get_rate = sama5d4_h32mx_clk_get_rate,
};
static int sama5d4_h32mx_clk_probe(struct udevice *dev)
{
return at91_pmc_core_probe(dev);
}
static const struct udevice_id sama5d4_h32mx_clk_match[] = {
{ .compatible = "atmel,sama5d4-clk-h32mx" },
{}
};
U_BOOT_DRIVER(sama5d4_h32mx_clk) = {
.name = "sama5d4-h32mx-clk",
.id = UCLASS_CLK,
.of_match = sama5d4_h32mx_clk_match,
.probe = sama5d4_h32mx_clk_probe,
.plat_auto = sizeof(struct pmc_plat),
.ops = &sama5d4_h32mx_clk_ops,
};
#endif /* CONFIG_AT91_H32MX */
/* Generic clock specific code. */
#ifdef CONFIG_AT91_GENERIC_CLK
#define GENERATED_SOURCE_MAX 6
#define GENERATED_MAX_DIV 255
/**
* generated_clk_bind() - for the generated clock driver
* Recursively bind its children as clk devices.
*
* @return: 0 on success, or negative error code on failure
*/
static int generated_clk_bind(struct udevice *dev)
{
return at91_clk_sub_device_bind(dev, "generic-clk");
}
static const struct udevice_id generated_clk_match[] = {
{ .compatible = "atmel,sama5d2-clk-generated" },
{}
};
U_BOOT_DRIVER(generated_clk) = {
.name = "generated-clk",
.id = UCLASS_MISC,
.of_match = generated_clk_match,
.bind = generated_clk_bind,
};
struct generic_clk_priv {
u32 num_parents;
};
static ulong generic_clk_get_rate(struct clk *clk)
{
struct pmc_plat *plat = dev_get_plat(clk->dev);
struct at91_pmc *pmc = plat->reg_base;
struct clk parent;
ulong clk_rate;
u32 tmp, gckdiv;
u8 clock_source, parent_index;
int ret;
writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
tmp = readl(&pmc->pcr);
clock_source = (tmp >> AT91_PMC_PCR_GCKCSS_OFFSET) &
AT91_PMC_PCR_GCKCSS_MASK;
gckdiv = (tmp >> AT91_PMC_PCR_GCKDIV_OFFSET) & AT91_PMC_PCR_GCKDIV_MASK;
parent_index = clock_source - 1;
ret = clk_get_by_index(dev_get_parent(clk->dev), parent_index, &parent);
if (ret)
return 0;
clk_rate = clk_get_rate(&parent) / (gckdiv + 1);
clk_free(&parent);
return clk_rate;
}
static ulong generic_clk_set_rate(struct clk *clk, ulong rate)
{
struct pmc_plat *plat = dev_get_plat(clk->dev);
struct at91_pmc *pmc = plat->reg_base;
struct generic_clk_priv *priv = dev_get_priv(clk->dev);
struct clk parent, best_parent;
ulong tmp_rate, best_rate = rate, parent_rate;
int tmp_diff, best_diff = -1;
u32 div, best_div = 0;
u8 best_parent_index, best_clock_source = 0;
u8 i;
u32 tmp;
int ret;
for (i = 0; i < priv->num_parents; i++) {
ret = clk_get_by_index(dev_get_parent(clk->dev), i, &parent);
if (ret)
return ret;
parent_rate = clk_get_rate(&parent);
if (IS_ERR_VALUE(parent_rate))
return parent_rate;
for (div = 1; div < GENERATED_MAX_DIV + 2; div++) {
tmp_rate = DIV_ROUND_CLOSEST(parent_rate, div);
tmp_diff = abs(rate - tmp_rate);
if (best_diff < 0 || best_diff > tmp_diff) {
best_rate = tmp_rate;
best_diff = tmp_diff;
best_div = div - 1;
best_parent = parent;
best_parent_index = i;
best_clock_source = best_parent_index + 1;
}
if (!best_diff || tmp_rate < rate)
break;
}
if (!best_diff)
break;
}
debug("GCK: best parent: %s, best_rate = %ld, best_div = %d\n",
best_parent.dev->name, best_rate, best_div);
ret = clk_enable(&best_parent);
if (ret)
return ret;
writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
tmp = readl(&pmc->pcr);
tmp &= ~(AT91_PMC_PCR_GCKDIV | AT91_PMC_PCR_GCKCSS);
tmp |= AT91_PMC_PCR_GCKCSS_(best_clock_source) |
AT91_PMC_PCR_CMD_WRITE |
AT91_PMC_PCR_GCKDIV_(best_div) |
AT91_PMC_PCR_GCKEN;
writel(tmp, &pmc->pcr);
while (!(readl(&pmc->sr) & AT91_PMC_GCKRDY))
;
return 0;
}
static struct clk_ops generic_clk_ops = {
.of_xlate = at91_clk_of_xlate,
.get_rate = generic_clk_get_rate,
.set_rate = generic_clk_set_rate,
};
static int generic_clk_of_to_plat(struct udevice *dev)
{
struct generic_clk_priv *priv = dev_get_priv(dev);
u32 cells[GENERATED_SOURCE_MAX];
u32 num_parents;
num_parents = fdtdec_get_int_array_count(gd->fdt_blob,
dev_of_offset(dev_get_parent(dev)), "clocks", cells,
GENERATED_SOURCE_MAX);
if (!num_parents)
return -1;
priv->num_parents = num_parents;
return 0;
}
U_BOOT_DRIVER(generic_clk) = {
.name = "generic-clk",
.id = UCLASS_CLK,
.probe = at91_clk_probe,
.of_to_plat = generic_clk_of_to_plat,
.priv_auto = sizeof(struct generic_clk_priv),
.plat_auto = sizeof(struct pmc_plat),
.ops = &generic_clk_ops,
};
#endif /* CONFIG_AT91_GENERIC_CLK */
/* USB clock specific code. */
#ifdef CONFIG_AT91_USB_CLK
#define AT91_USB_CLK_SOURCE_MAX 2
#define AT91_USB_CLK_MAX_DIV 15
struct at91_usb_clk_priv {
u32 num_clksource;
};
static ulong at91_usb_clk_get_rate(struct clk *clk)
{
struct pmc_plat *plat = dev_get_plat(clk->dev);
struct at91_pmc *pmc = plat->reg_base;
struct clk source;
u32 tmp, usbdiv;
u8 source_index;
int ret;
tmp = readl(&pmc->pcr);
source_index = (tmp >> AT91_PMC_USB_USBS_OFFSET) &
AT91_PMC_USB_USBS_MASK;
usbdiv = (tmp >> AT91_PMC_USB_DIV_OFFSET) & AT91_PMC_USB_DIV_MASK;
ret = clk_get_by_index(clk->dev, source_index, &source);
if (ret)
return 0;
return clk_get_rate(&source) / (usbdiv + 1);
}
static ulong at91_usb_clk_set_rate(struct clk *clk, ulong rate)
{
struct pmc_plat *plat = dev_get_plat(clk->dev);
struct at91_pmc *pmc = plat->reg_base;
struct at91_usb_clk_priv *priv = dev_get_priv(clk->dev);
struct clk source, best_source;
ulong tmp_rate, best_rate = rate, source_rate;
int tmp_diff, best_diff = -1;
u32 div, best_div = 0;
u8 best_source_index = 0;
u8 i;
u32 tmp;
int ret;
for (i = 0; i < priv->num_clksource; i++) {
ret = clk_get_by_index(clk->dev, i, &source);
if (ret)
return ret;
source_rate = clk_get_rate(&source);
if (IS_ERR_VALUE(source_rate))
return source_rate;
for (div = 1; div < AT91_USB_CLK_MAX_DIV + 2; div++) {
tmp_rate = DIV_ROUND_CLOSEST(source_rate, div);
tmp_diff = abs(rate - tmp_rate);
if (best_diff < 0 || best_diff > tmp_diff) {
best_rate = tmp_rate;
best_diff = tmp_diff;
best_div = div - 1;
best_source = source;
best_source_index = i;
}
if (!best_diff || tmp_rate < rate)
break;
}
if (!best_diff)
break;
}
debug("AT91 USB: best sourc: %s, best_rate = %ld, best_div = %d\n",
best_source.dev->name, best_rate, best_div);
ret = clk_enable(&best_source);
if (ret)
return ret;
tmp = AT91_PMC_USB_USBS_(best_source_index) |
AT91_PMC_USB_DIV_(best_div);
writel(tmp, &pmc->usb);
return 0;
}
static struct clk_ops at91_usb_clk_ops = {
.get_rate = at91_usb_clk_get_rate,
.set_rate = at91_usb_clk_set_rate,
};
static int at91_usb_clk_of_to_plat(struct udevice *dev)
{
struct at91_usb_clk_priv *priv = dev_get_priv(dev);
u32 cells[AT91_USB_CLK_SOURCE_MAX];
u32 num_clksource;
num_clksource = fdtdec_get_int_array_count(gd->fdt_blob,
dev_of_offset(dev),
"clocks", cells,
AT91_USB_CLK_SOURCE_MAX);
if (!num_clksource)
return -1;
priv->num_clksource = num_clksource;
return 0;
}
static int at91_usb_clk_probe(struct udevice *dev)
{
return at91_pmc_core_probe(dev);
}
static const struct udevice_id at91_usb_clk_match[] = {
{ .compatible = "atmel,at91sam9x5-clk-usb" },
{}
};
U_BOOT_DRIVER(at91_usb_clk) = {
.name = "at91-usb-clk",
.id = UCLASS_CLK,
.of_match = at91_usb_clk_match,
.probe = at91_usb_clk_probe,
.of_to_plat = at91_usb_clk_of_to_plat,
.priv_auto = sizeof(struct at91_usb_clk_priv),
.plat_auto = sizeof(struct pmc_plat),
.ops = &at91_usb_clk_ops,
};
#endif /* CONFIG_AT91_USB_CLK */