| /* |
| * NS16550 Serial Port |
| * originally from linux source (arch/powerpc/boot/ns16550.h) |
| * modified slightly to |
| * have addresses as offsets from CONFIG_SYS_ISA_BASE |
| * added a few more definitions |
| * added prototypes for ns16550.c |
| * reduced no of com ports to 2 |
| * modifications (c) Rob Taylor, Flying Pig Systems. 2000. |
| * further modified to support the 8245 duart |
| * modifications (c) Paul Jimenez, Musenki, Inc. 2001. |
| */ |
| |
| |
| struct NS16550 { |
| unsigned char rbrthrdlb; /* 0 */ |
| unsigned char ierdmb; /* 1 */ |
| unsigned char iirfcrafr; /* 2 */ |
| unsigned char lcr; /* 3 */ |
| unsigned char mcr; /* 4 */ |
| unsigned char lsr; /* 5 */ |
| unsigned char msr; /* 6 */ |
| unsigned char scr; /* 7 */ |
| unsigned char reserved[2]; /* 8 & 9 */ |
| unsigned char dsr; /* 10 */ |
| unsigned char dcr; /* 11 */ |
| }; |
| |
| |
| #define rbr rbrthrdlb |
| #define thr rbrthrdlb |
| #define dll rbrthrdlb |
| #define ier ierdmb |
| #define dlm ierdmb |
| #define iir iirfcrafr |
| #define fcr iirfcrafr |
| #define afr iirfcrafr |
| |
| #define FCR_FIFO_EN 0x01 /*fifo enable */ |
| #define FCR_RXSR 0x02 /*reciever soft reset */ |
| #define FCR_TXSR 0x04 /*transmitter soft reset */ |
| #define FCR_DMS 0x08 /* DMA Mode Select */ |
| |
| #define MCR_RTS 0x02 /* Readyu to Send */ |
| #define MCR_LOOP 0x10 /* Local loopback mode enable */ |
| /* #define MCR_DTR 0x01 noton 8245 duart */ |
| /* #define MCR_DMA_EN 0x04 noton 8245 duart */ |
| /* #define MCR_TX_DFR 0x08 noton 8245 duart */ |
| |
| #define LCR_WLS_MSK 0x03 /* character length slect mask */ |
| #define LCR_WLS_5 0x00 /* 5 bit character length */ |
| #define LCR_WLS_6 0x01 /* 6 bit character length */ |
| #define LCR_WLS_7 0x02 /* 7 bit character length */ |
| #define LCR_WLS_8 0x03 /* 8 bit character length */ |
| #define LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */ |
| #define LCR_PEN 0x08 /* Parity eneble */ |
| #define LCR_EPS 0x10 /* Even Parity Select */ |
| #define LCR_STKP 0x20 /* Stick Parity */ |
| #define LCR_SBRK 0x40 /* Set Break */ |
| #define LCR_BKSE 0x80 /* Bank select enable - aka DLAB on 8245 */ |
| |
| #define LSR_DR 0x01 /* Data ready */ |
| #define LSR_OE 0x02 /* Overrun */ |
| #define LSR_PE 0x04 /* Parity error */ |
| #define LSR_FE 0x08 /* Framing error */ |
| #define LSR_BI 0x10 /* Break */ |
| #define LSR_THRE 0x20 /* Xmit holding register empty */ |
| #define LSR_TEMT 0x40 /* Xmitter empty */ |
| #define LSR_ERR 0x80 /* Error */ |
| |
| /* useful defaults for LCR*/ |
| #define LCR_8N1 0x03 |
| |
| |
| volatile struct NS16550 *NS16550_init (int chan, int baud_divisor); |
| void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c); |
| unsigned char NS16550_getc (volatile struct NS16550 *com_port); |
| int NS16550_tstc (volatile struct NS16550 *com_port); |
| void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor); |