| /* |
| * (C) Copyright 2011 |
| * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/ppc4xx-gpio.h> |
| |
| #include "405ep.h" |
| #include <gdsys_fpga.h> |
| |
| #define LATCH0_BASE (CONFIG_SYS_LATCH_BASE) |
| #define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100) |
| #define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) |
| |
| enum { |
| UNITTYPE_CCX16 = 1, |
| UNITTYPE_CCIP216 = 2, |
| }; |
| |
| enum { |
| HWVER_300 = 3, |
| }; |
| |
| struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; |
| |
| int misc_init_r(void) |
| { |
| /* |
| * Note: DTT has been removed. Please use UCLASS_THERMAL. |
| * |
| * startup fans |
| * |
| * dtt_init(); |
| */ |
| |
| return 0; |
| } |
| |
| int checkboard(void) |
| { |
| char *s = getenv("serial#"); |
| |
| puts("Board: CATCenter Neo"); |
| |
| if (s != NULL) { |
| puts(", serial# "); |
| puts(s); |
| } |
| |
| puts("\n"); |
| |
| return 0; |
| } |
| |
| static void print_fpga_info(void) |
| { |
| u16 versions; |
| u16 fpga_version; |
| u16 fpga_features; |
| int fpga_state = get_fpga_state(0); |
| unsigned unit_type; |
| unsigned hardware_version; |
| unsigned feature_channels; |
| |
| puts("FPGA: "); |
| if (fpga_state & FPGA_STATE_DONE_FAILED) { |
| printf(" done timed out\n"); |
| return; |
| } |
| |
| if (fpga_state & FPGA_STATE_REFLECTION_FAILED) { |
| printf(" refelectione test failed\n"); |
| return; |
| } |
| |
| FPGA_GET_REG(0, versions, &versions); |
| FPGA_GET_REG(0, fpga_version, &fpga_version); |
| FPGA_GET_REG(0, fpga_features, &fpga_features); |
| |
| unit_type = (versions & 0xf000) >> 12; |
| hardware_version = versions & 0x000f; |
| feature_channels = fpga_features & 0x007f; |
| |
| switch (unit_type) { |
| case UNITTYPE_CCX16: |
| printf("CCX-Switch"); |
| break; |
| |
| default: |
| printf("UnitType %d(not supported)", unit_type); |
| break; |
| } |
| |
| switch (hardware_version) { |
| case HWVER_300: |
| printf(" HW-Ver 3.00-3.12\n"); |
| break; |
| |
| default: |
| printf(" HW-Ver %d(not supported)\n", |
| hardware_version); |
| break; |
| } |
| |
| printf(" FPGA V %d.%02d, features:", |
| fpga_version / 100, fpga_version % 100); |
| |
| printf(" %d channel(s)\n", feature_channels); |
| } |
| |
| int last_stage_init(void) |
| { |
| print_fpga_info(); |
| |
| return 0; |
| } |
| |
| void gd405ep_init(void) |
| { |
| } |
| |
| void gd405ep_set_fpga_reset(unsigned state) |
| { |
| if (state) { |
| out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); |
| out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); |
| } else { |
| out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); |
| out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); |
| } |
| } |
| |
| void gd405ep_setup_hw(void) |
| { |
| /* |
| * set "startup-finished"-gpios |
| */ |
| gpio_write_bit(21, 0); |
| gpio_write_bit(22, 1); |
| } |
| |
| int gd405ep_get_fpga_done(unsigned fpga) |
| { |
| /* |
| * Neo hardware has no FPGA-DONE GPIO |
| */ |
| return 1; |
| } |