| /* |
| * Copyright 2011 Freescale Semiconductor, Inc. |
| * Andy Fleming <afleming@freescale.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| * |
| * This file pretty much stolen from Linux's mii.h/ethtool.h/phy.h |
| */ |
| |
| #ifndef _PHY_H |
| #define _PHY_H |
| |
| #include <linux/list.h> |
| #include <linux/mii.h> |
| #include <linux/ethtool.h> |
| #include <linux/mdio.h> |
| |
| #define PHY_MAX_ADDR 32 |
| |
| #define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ |
| SUPPORTED_10baseT_Full | \ |
| SUPPORTED_100baseT_Half | \ |
| SUPPORTED_100baseT_Full | \ |
| SUPPORTED_Autoneg | \ |
| SUPPORTED_TP | \ |
| SUPPORTED_MII) |
| |
| #define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \ |
| SUPPORTED_1000baseT_Half | \ |
| SUPPORTED_1000baseT_Full) |
| |
| #define PHY_10G_FEATURES (PHY_GBIT_FEATURES | \ |
| SUPPORTED_10000baseT_Full) |
| |
| #define PHY_ANEG_TIMEOUT 4000 |
| |
| |
| typedef enum { |
| PHY_INTERFACE_MODE_MII, |
| PHY_INTERFACE_MODE_GMII, |
| PHY_INTERFACE_MODE_SGMII, |
| PHY_INTERFACE_MODE_QSGMII, |
| PHY_INTERFACE_MODE_TBI, |
| PHY_INTERFACE_MODE_RMII, |
| PHY_INTERFACE_MODE_RGMII, |
| PHY_INTERFACE_MODE_RGMII_ID, |
| PHY_INTERFACE_MODE_RGMII_RXID, |
| PHY_INTERFACE_MODE_RGMII_TXID, |
| PHY_INTERFACE_MODE_RTBI, |
| PHY_INTERFACE_MODE_XGMII, |
| PHY_INTERFACE_MODE_NONE /* Must be last */ |
| } phy_interface_t; |
| |
| static const char *phy_interface_strings[] = { |
| [PHY_INTERFACE_MODE_MII] = "mii", |
| [PHY_INTERFACE_MODE_GMII] = "gmii", |
| [PHY_INTERFACE_MODE_SGMII] = "sgmii", |
| [PHY_INTERFACE_MODE_QSGMII] = "qsgmii", |
| [PHY_INTERFACE_MODE_TBI] = "tbi", |
| [PHY_INTERFACE_MODE_RMII] = "rmii", |
| [PHY_INTERFACE_MODE_RGMII] = "rgmii", |
| [PHY_INTERFACE_MODE_RGMII_ID] = "rgmii-id", |
| [PHY_INTERFACE_MODE_RGMII_RXID] = "rgmii-rxid", |
| [PHY_INTERFACE_MODE_RGMII_TXID] = "rgmii-txid", |
| [PHY_INTERFACE_MODE_RTBI] = "rtbi", |
| [PHY_INTERFACE_MODE_XGMII] = "xgmii", |
| [PHY_INTERFACE_MODE_NONE] = "", |
| }; |
| |
| static inline const char *phy_string_for_interface(phy_interface_t i) |
| { |
| /* Default to unknown */ |
| if (i > PHY_INTERFACE_MODE_NONE) |
| i = PHY_INTERFACE_MODE_NONE; |
| |
| return phy_interface_strings[i]; |
| } |
| |
| |
| struct phy_device; |
| |
| #define MDIO_NAME_LEN 32 |
| |
| struct mii_dev { |
| struct list_head link; |
| char name[MDIO_NAME_LEN]; |
| void *priv; |
| int (*read)(struct mii_dev *bus, int addr, int devad, int reg); |
| int (*write)(struct mii_dev *bus, int addr, int devad, int reg, |
| u16 val); |
| int (*reset)(struct mii_dev *bus); |
| struct phy_device *phymap[PHY_MAX_ADDR]; |
| u32 phy_mask; |
| }; |
| |
| /* struct phy_driver: a structure which defines PHY behavior |
| * |
| * uid will contain a number which represents the PHY. During |
| * startup, the driver will poll the PHY to find out what its |
| * UID--as defined by registers 2 and 3--is. The 32-bit result |
| * gotten from the PHY will be masked to |
| * discard any bits which may change based on revision numbers |
| * unimportant to functionality |
| * |
| */ |
| struct phy_driver { |
| char *name; |
| unsigned int uid; |
| unsigned int mask; |
| unsigned int mmds; |
| |
| u32 features; |
| |
| /* Called to do any driver startup necessities */ |
| /* Will be called during phy_connect */ |
| int (*probe)(struct phy_device *phydev); |
| |
| /* Called to configure the PHY, and modify the controller |
| * based on the results. Should be called after phy_connect */ |
| int (*config)(struct phy_device *phydev); |
| |
| /* Called when starting up the controller */ |
| int (*startup)(struct phy_device *phydev); |
| |
| /* Called when bringing down the controller */ |
| int (*shutdown)(struct phy_device *phydev); |
| |
| struct list_head list; |
| }; |
| |
| struct phy_device { |
| /* Information about the PHY type */ |
| /* And management functions */ |
| struct mii_dev *bus; |
| struct phy_driver *drv; |
| void *priv; |
| |
| struct eth_device *dev; |
| |
| /* forced speed & duplex (no autoneg) |
| * partner speed & duplex & pause (autoneg) |
| */ |
| int speed; |
| int duplex; |
| |
| /* The most recently read link state */ |
| int link; |
| int port; |
| phy_interface_t interface; |
| |
| u32 advertising; |
| u32 supported; |
| u32 mmds; |
| |
| int autoneg; |
| int addr; |
| int pause; |
| int asym_pause; |
| u32 phy_id; |
| u32 flags; |
| }; |
| |
| static inline int phy_read(struct phy_device *phydev, int devad, int regnum) |
| { |
| struct mii_dev *bus = phydev->bus; |
| |
| return bus->read(bus, phydev->addr, devad, regnum); |
| } |
| |
| static inline int phy_write(struct phy_device *phydev, int devad, int regnum, |
| u16 val) |
| { |
| struct mii_dev *bus = phydev->bus; |
| |
| return bus->write(bus, phydev->addr, devad, regnum, val); |
| } |
| |
| #ifdef CONFIG_PHYLIB_10G |
| extern struct phy_driver gen10g_driver; |
| |
| /* For now, XGMII is the only 10G interface */ |
| static inline int is_10g_interface(phy_interface_t interface) |
| { |
| return interface == PHY_INTERFACE_MODE_XGMII; |
| } |
| |
| #endif |
| |
| int phy_init(void); |
| int phy_reset(struct phy_device *phydev); |
| struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask, |
| phy_interface_t interface); |
| void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev); |
| struct phy_device *phy_connect(struct mii_dev *bus, int addr, |
| struct eth_device *dev, |
| phy_interface_t interface); |
| int phy_startup(struct phy_device *phydev); |
| int phy_config(struct phy_device *phydev); |
| int phy_shutdown(struct phy_device *phydev); |
| int phy_register(struct phy_driver *drv); |
| int genphy_config_aneg(struct phy_device *phydev); |
| int genphy_restart_aneg(struct phy_device *phydev); |
| int genphy_update_link(struct phy_device *phydev); |
| int genphy_config(struct phy_device *phydev); |
| int genphy_startup(struct phy_device *phydev); |
| int genphy_shutdown(struct phy_device *phydev); |
| int gen10g_config(struct phy_device *phydev); |
| int gen10g_startup(struct phy_device *phydev); |
| int gen10g_shutdown(struct phy_device *phydev); |
| int gen10g_discover_mmds(struct phy_device *phydev); |
| |
| int phy_atheros_init(void); |
| int phy_broadcom_init(void); |
| int phy_davicom_init(void); |
| int phy_et1011c_init(void); |
| int phy_lxt_init(void); |
| int phy_marvell_init(void); |
| int phy_micrel_init(void); |
| int phy_natsemi_init(void); |
| int phy_realtek_init(void); |
| int phy_smsc_init(void); |
| int phy_teranetics_init(void); |
| int phy_vitesse_init(void); |
| |
| /* PHY UIDs for various PHYs that are referenced in external code */ |
| #define PHY_UID_TN2020 0x00a19410 |
| |
| #endif |