| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * JZ4780 DDR initialization |
| * |
| * Copyright (c) 2013 Imagination Technologies |
| * Author: Paul Burton <paul.burton@imgtec.com> |
| * |
| * Based on spl/common/{jz4780_ddr,jz_ddr3_init}.c from X-Boot |
| * Copyright (c) 2006-2013 Ingenic Semiconductor |
| */ |
| |
| #include <common.h> |
| #include <hang.h> |
| #include <asm/io.h> |
| #include <mach/jz4780.h> |
| #include <mach/jz4780_dram.h> |
| |
| static const u32 get_mem_clk(void) |
| { |
| const u32 mpll_out = ((u64)JZ4780_SYS_EXTAL * JZ4780_MPLL_M) / |
| (JZ4780_MPLL_N * JZ4780_MPLL_OD); |
| return mpll_out / JZ4780_SYS_MEM_DIV; |
| } |
| |
| u32 sdram_size(int cs) |
| { |
| u32 dw = DDR_DW32 ? 4 : 2; |
| u32 banks = DDR_BANK8 ? 8 : 4; |
| u32 size = 0; |
| |
| if ((cs == 0) && DDR_CS0EN) { |
| size = (1 << (DDR_ROW + DDR_COL)) * dw * banks; |
| if (DDR_CS1EN && (size > 0x20000000)) |
| size = 0x20000000; |
| } else if ((cs == 1) && DDR_CS1EN) { |
| size = (1 << (DDR_ROW + DDR_COL)) * dw * banks; |
| } |
| |
| return size; |
| } |
| |
| static void ddr_cfg_init(void) |
| { |
| void __iomem *ddr_ctl_regs = (void __iomem *)DDRC_BASE; |
| u32 ddrc_cfg, tmp; |
| |
| tmp = DDR_CL; |
| if (tmp) |
| tmp--; |
| if (tmp > 4) |
| tmp = 4; |
| |
| ddrc_cfg = DDRC_CFG_TYPE_DDR3 | DDRC_CFG_IMBA | |
| DDR_DW32 | DDRC_CFG_MPRT | ((tmp | 0x8) << 2) | |
| ((DDR_ROW - 12) << 11) | ((DDR_COL - 8) << 8) | |
| (DDR_CS0EN << 6) | (DDR_BANK8 << 1) | |
| ((DDR_ROW - 12) << 27) | ((DDR_COL - 8) << 24) | |
| (DDR_CS1EN << 7) | (DDR_BANK8 << 23); |
| |
| if (DDR_BL > 4) |
| ddrc_cfg |= BIT(21); |
| |
| writel(ddrc_cfg, ddr_ctl_regs + DDRC_CFG); |
| } |
| |
| static void ddr_phy_init(const struct jz4780_ddr_config *ddr_config) |
| { |
| void __iomem *ddr_ctl_regs = (void __iomem *)DDRC_BASE; |
| void __iomem *ddr_phy_regs = ddr_ctl_regs + DDR_PHY_OFFSET; |
| unsigned int count = 0, i; |
| u32 reg, mask; |
| |
| writel(DDRP_DCR_TYPE_DDR3 | (DDR_BANK8 << 3), ddr_phy_regs + DDRP_DCR); |
| |
| writel(ddr_config->mr0, ddr_phy_regs + DDRP_MR0); |
| writel(ddr_config->mr1, ddr_phy_regs + DDRP_MR1); |
| writel(0, ddr_phy_regs + DDRP_ODTCR); |
| writel(0, ddr_phy_regs + DDRP_MR2); |
| |
| writel(ddr_config->ptr0, ddr_phy_regs + DDRP_PTR0); |
| writel(ddr_config->ptr1, ddr_phy_regs + DDRP_PTR1); |
| writel(ddr_config->ptr2, ddr_phy_regs + DDRP_PTR2); |
| |
| writel(ddr_config->dtpr0, ddr_phy_regs + DDRP_DTPR0); |
| writel(ddr_config->dtpr1, ddr_phy_regs + DDRP_DTPR1); |
| writel(ddr_config->dtpr2, ddr_phy_regs + DDRP_DTPR2); |
| |
| writel(DDRP_PGCR_DQSCFG | (7 << DDRP_PGCR_CKEN_BIT) | |
| (2 << DDRP_PGCR_CKDV_BIT) | |
| (DDR_CS0EN | (DDR_CS1EN << 1)) << DDRP_PGCR_RANKEN_BIT | |
| DDRP_PGCR_ZCKSEL_32 | DDRP_PGCR_PDDISDX, |
| ddr_phy_regs + DDRP_PGCR); |
| |
| for (i = 0; i < 8; i++) |
| clrbits_le32(ddr_phy_regs + DDRP_DXGCR(i), 0x3 << 9); |
| |
| count = 0; |
| mask = DDRP_PGSR_IDONE | DDRP_PGSR_DLDONE | DDRP_PGSR_ZCDONE; |
| for (;;) { |
| reg = readl(ddr_phy_regs + DDRP_PGSR); |
| if ((reg == mask) || (reg == 0x1f)) |
| break; |
| if (count++ == 10000) |
| hang(); |
| } |
| |
| /* DQS extension and early set to 1 */ |
| clrsetbits_le32(ddr_phy_regs + DDRP_DSGCR, 0x7E << 4, 0x12 << 4); |
| |
| /* 500 pull up and 500 pull down */ |
| clrsetbits_le32(ddr_phy_regs + DDRP_DXCCR, 0xFF << 4, 0xC4 << 4); |
| |
| /* Initialise phy */ |
| writel(DDRP_PIR_INIT | DDRP_PIR_DRAMINT | DDRP_PIR_DRAMRST, |
| ddr_phy_regs + DDRP_PIR); |
| |
| count = 0; |
| mask |= DDRP_PGSR_DIDONE; |
| for (;;) { |
| reg = readl(ddr_phy_regs + DDRP_PGSR); |
| if ((reg == mask) || (reg == 0x1f)) |
| break; |
| if (count++ == 20000) |
| hang(); |
| } |
| |
| writel(DDRP_PIR_INIT | DDRP_PIR_QSTRN, ddr_phy_regs + DDRP_PIR); |
| |
| count = 0; |
| mask |= DDRP_PGSR_DTDONE; |
| for (;;) { |
| reg = readl(ddr_phy_regs + DDRP_PGSR); |
| if (reg == mask) |
| break; |
| if (count++ != 50000) |
| continue; |
| reg &= DDRP_PGSR_DTDONE | DDRP_PGSR_DTERR | DDRP_PGSR_DTIERR; |
| if (reg) |
| hang(); |
| count = 0; |
| } |
| |
| /* Override impedance */ |
| clrsetbits_le32(ddr_phy_regs + DDRP_ZQXCR0(0), 0x3ff, |
| ((ddr_config->pullup & 0x1f) << DDRP_ZQXCR_PULLUP_IMPE_BIT) | |
| ((ddr_config->pulldn & 0x1f) << DDRP_ZQXCR_PULLDOWN_IMPE_BIT) | |
| DDRP_ZQXCR_ZDEN); |
| } |
| |
| #define JZBIT(bit) ((bit % 4) * 8) |
| #define JZMASK(bit) (0x1f << JZBIT(bit)) |
| |
| static void remap_swap(int a, int b) |
| { |
| void __iomem *ddr_ctl_regs = (void __iomem *)DDRC_BASE; |
| u32 remmap[2], tmp[2]; |
| |
| remmap[0] = readl(ddr_ctl_regs + DDRC_REMMAP(a / 4)); |
| remmap[1] = readl(ddr_ctl_regs + DDRC_REMMAP(b / 4)); |
| |
| tmp[0] = (remmap[0] & JZMASK(a)) >> JZBIT(a); |
| tmp[1] = (remmap[1] & JZMASK(b)) >> JZBIT(b); |
| |
| remmap[0] &= ~JZMASK(a); |
| remmap[1] &= ~JZMASK(b); |
| |
| writel(remmap[0] | (tmp[1] << JZBIT(a)), |
| ddr_ctl_regs + DDRC_REMMAP(a / 4)); |
| writel(remmap[1] | (tmp[0] << JZBIT(b)), |
| ddr_ctl_regs + DDRC_REMMAP(b / 4)); |
| } |
| |
| static void mem_remap(void) |
| { |
| u32 start = (DDR_ROW + DDR_COL + (DDR_DW32 ? 4 : 2) / 2) - 12; |
| u32 num = DDR_BANK8 ? 3 : 2; |
| |
| if (DDR_CS0EN && DDR_CS1EN) |
| num++; |
| |
| for (; num > 0; num--) |
| remap_swap(0 + num - 1, start + num - 1); |
| } |
| |
| /* Fetch DRAM config from board file */ |
| __weak const struct jz4780_ddr_config *jz4780_get_ddr_config(void) |
| { |
| return NULL; |
| } |
| |
| void sdram_init(void) |
| { |
| const struct jz4780_ddr_config *ddr_config = jz4780_get_ddr_config(); |
| void __iomem *ddr_ctl_regs = (void __iomem *)DDRC_BASE; |
| void __iomem *ddr_phy_regs = ddr_ctl_regs + DDR_PHY_OFFSET; |
| void __iomem *cpm_regs = (void __iomem *)CPM_BASE; |
| u32 mem_clk, tmp, i; |
| u32 mem_base0, mem_base1; |
| u32 mem_mask0, mem_mask1; |
| u32 mem_size0, mem_size1; |
| |
| if (!ddr_config) |
| hang(); |
| |
| /* Reset DLL in DDR PHY */ |
| writel(0x3, cpm_regs + 0xd0); |
| mdelay(400); |
| writel(0x1, cpm_regs + 0xd0); |
| mdelay(400); |
| |
| /* Enter reset */ |
| writel(0xf << 20, ddr_ctl_regs + DDRC_CTRL); |
| |
| mem_clk = get_mem_clk(); |
| |
| tmp = 1000000000 / mem_clk; |
| if (1000000000 % mem_clk) |
| tmp++; |
| tmp = DDR_tREFI / tmp; |
| tmp = tmp / (16 * (1 << DDR_CLK_DIV)) - 1; |
| if (tmp > 0xff) |
| tmp = 0xff; |
| if (tmp < 1) |
| tmp = 1; |
| |
| writel(0x0, ddr_ctl_regs + DDRC_CTRL); |
| |
| writel(0x150000, ddr_phy_regs + DDRP_DTAR); |
| ddr_phy_init(ddr_config); |
| |
| writel(DDRC_CTRL_CKE | DDRC_CTRL_ALH, ddr_ctl_regs + DDRC_CTRL); |
| writel(0x0, ddr_ctl_regs + DDRC_CTRL); |
| |
| ddr_cfg_init(); |
| |
| for (i = 0; i < 6; i++) |
| writel(ddr_config->timing[i], ddr_ctl_regs + DDRC_TIMING(i)); |
| |
| mem_size0 = sdram_size(0); |
| mem_size1 = sdram_size(1); |
| |
| if (!mem_size1 && mem_size0 > 0x20000000) { |
| mem_base0 = 0x0; |
| mem_mask0 = ~(((mem_size0 * 2) >> 24) - 1) & DDRC_MMAP_MASK_MASK; |
| } else { |
| mem_base0 = (DDR_MEM_PHY_BASE >> 24) & 0xff; |
| mem_mask0 = ~((mem_size0 >> 24) - 1) & DDRC_MMAP_MASK_MASK; |
| } |
| |
| if (mem_size1) { |
| mem_mask1 = ~((mem_size1 >> 24) - 1) & DDRC_MMAP_MASK_MASK; |
| mem_base1 = ((DDR_MEM_PHY_BASE + mem_size0) >> 24) & 0xff; |
| } else { |
| mem_mask1 = 0; |
| mem_base1 = 0xff; |
| } |
| |
| writel(mem_base0 << DDRC_MMAP_BASE_BIT | mem_mask0, |
| ddr_ctl_regs + DDRC_MMAP0); |
| writel(mem_base1 << DDRC_MMAP_BASE_BIT | mem_mask1, |
| ddr_ctl_regs + DDRC_MMAP1); |
| writel(DDRC_CTRL_CKE | DDRC_CTRL_ALH, ddr_ctl_regs + DDRC_CTRL); |
| writel((DDR_CLK_DIV << 1) | DDRC_REFCNT_REF_EN | |
| (tmp << DDRC_REFCNT_CON_BIT), |
| ddr_ctl_regs + DDRC_REFCNT); |
| writel((1 << 15) | (4 << 12) | (1 << 11) | (1 << 8) | (0 << 6) | |
| (1 << 4) | (1 << 3) | (1 << 2) | (1 << 1), |
| ddr_ctl_regs + DDRC_CTRL); |
| mem_remap(); |
| clrbits_le32(ddr_ctl_regs + DDRC_ST, 0x40); |
| } |