| /* |
| * ADI Blackfin 537 MAC Ethernet |
| * |
| * Copyright (c) 2005 Analog Device, Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <config.h> |
| #include <asm/blackfin.h> |
| #include <net.h> |
| #include <command.h> |
| #include <malloc.h> |
| #include "ether_bf537.h" |
| |
| #ifdef CONFIG_POST |
| #include <post.h> |
| #endif |
| |
| #undef DEBUG_ETHERNET |
| |
| #ifdef DEBUG_ETHERNET |
| #define DEBUGF(fmt,args...) printf(fmt,##args) |
| #else |
| #define DEBUGF(fmt,args...) |
| #endif |
| |
| #if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET) |
| |
| #define RXBUF_BASE_ADDR 0xFF900000 |
| #define TXBUF_BASE_ADDR 0xFF800000 |
| #define TX_BUF_CNT 1 |
| |
| #define TOUT_LOOP 1000000 |
| |
| ADI_ETHER_BUFFER *txbuf[TX_BUF_CNT]; |
| ADI_ETHER_BUFFER *rxbuf[PKTBUFSRX]; |
| static u16 txIdx; /* index of the current RX buffer */ |
| static u16 rxIdx; /* index of the current TX buffer */ |
| |
| u8 SrcAddr[6]; |
| u16 PHYregs[NO_PHY_REGS]; /* u16 PHYADDR; */ |
| |
| /* DMAx_CONFIG values at DMA Restart */ |
| const ADI_DMA_CONFIG_REG rxdmacfg = { 1, 1, 2, 0, 0, 0, 0, 5, 7 }; |
| |
| #if 0 |
| rxdmacfg.b_DMA_EN = 1; /* enabled */ |
| rxdmacfg.b_WNR = 1; /* write to memory */ |
| rxdmacfg.b_WDSIZE = 2; /* wordsize is 32 bits */ |
| rxdmacfg.b_DMA2D = 0; /* N/A */ |
| rxdmacfg.b_RESTART= 0; /* N/A */ |
| rxdmacfg.b_DI_SEL = 0; /* N/A */ |
| rxdmacfg.b_DI_EN = 0; /* no interrupt */ |
| rxdmacfg.b_NDSIZE = 5; /* 5 half words is desc size. */ |
| rxdmacfg.b_FLOW = 7; /* large desc flow */ |
| #endif |
| |
| const ADI_DMA_CONFIG_REG txdmacfg = { 1, 0, 2, 0, 0, 0, 0, 5, 7 }; |
| |
| #if 0 |
| txdmacfg.b_DMA_EN = 1; /* enabled */ |
| txdmacfg.b_WNR = 0; /* read from memory */ |
| txdmacfg.b_WDSIZE = 2; /* wordsize is 32 bits */ |
| txdmacfg.b_DMA2D = 0; /* N/A */ |
| txdmacfg.b_RESTART= 0; /* N/A */ |
| txdmacfg.b_DI_SEL = 0; /* N/A */ |
| txdmacfg.b_DI_EN = 0; /* no interrupt */ |
| txdmacfg.b_NDSIZE = 5; /* 5 half words is desc size. */ |
| txdmacfg.b_FLOW = 7; /* large desc flow */ |
| #endif |
| |
| ADI_ETHER_BUFFER *SetupRxBuffer(int no); |
| ADI_ETHER_BUFFER *SetupTxBuffer(int no); |
| |
| static int bfin_EMAC_init(struct eth_device *dev, bd_t * bd); |
| static void bfin_EMAC_halt(struct eth_device *dev); |
| static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet, |
| int length); |
| static int bfin_EMAC_recv(struct eth_device *dev); |
| |
| int bfin_EMAC_initialize(bd_t * bis) |
| { |
| struct eth_device *dev; |
| dev = (struct eth_device *)malloc(sizeof(*dev)); |
| if (dev == NULL) |
| hang(); |
| |
| memset(dev, 0, sizeof(*dev)); |
| sprintf(dev->name, "BF537 ETHERNET"); |
| |
| dev->iobase = 0; |
| dev->priv = 0; |
| dev->init = bfin_EMAC_init; |
| dev->halt = bfin_EMAC_halt; |
| dev->send = bfin_EMAC_send; |
| dev->recv = bfin_EMAC_recv; |
| |
| eth_register(dev); |
| |
| return 1; |
| } |
| |
| static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet, |
| int length) |
| { |
| int i; |
| int result = 0; |
| unsigned int *buf; |
| buf = (unsigned int *)packet; |
| |
| if (length <= 0) { |
| printf("Ethernet: bad packet size: %d\n", length); |
| goto out; |
| } |
| |
| if ((*pDMA2_IRQ_STATUS & DMA_ERR) != 0) { |
| printf("Ethernet: tx DMA error\n"); |
| goto out; |
| } |
| |
| for (i = 0; (*pDMA2_IRQ_STATUS & DMA_RUN) != 0; i++) { |
| if (i > TOUT_LOOP) { |
| puts("Ethernet: tx time out\n"); |
| goto out; |
| } |
| } |
| txbuf[txIdx]->FrmData->NoBytes = length; |
| memcpy(txbuf[txIdx]->FrmData->Dest, (void *)packet, length); |
| txbuf[txIdx]->Dma[0].START_ADDR = (u32) txbuf[txIdx]->FrmData; |
| *pDMA2_NEXT_DESC_PTR = &txbuf[txIdx]->Dma[0]; |
| *pDMA2_CONFIG = *(u16 *) (void *)(&txdmacfg); |
| *pEMAC_OPMODE |= TE; |
| |
| for (i = 0; (txbuf[txIdx]->StatusWord & TX_COMP) == 0; i++) { |
| if (i > TOUT_LOOP) { |
| puts("Ethernet: tx error\n"); |
| goto out; |
| } |
| } |
| result = txbuf[txIdx]->StatusWord; |
| txbuf[txIdx]->StatusWord = 0; |
| if ((txIdx + 1) >= TX_BUF_CNT) |
| txIdx = 0; |
| else |
| txIdx++; |
| out: |
| DEBUGF("BFIN EMAC send: length = %d\n", length); |
| return result; |
| } |
| |
| static int bfin_EMAC_recv(struct eth_device *dev) |
| { |
| int length = 0; |
| |
| for (;;) { |
| if ((rxbuf[rxIdx]->StatusWord & RX_COMP) == 0) { |
| length = -1; |
| break; |
| } |
| if ((rxbuf[rxIdx]->StatusWord & RX_DMAO) != 0) { |
| printf("Ethernet: rx dma overrun\n"); |
| break; |
| } |
| if ((rxbuf[rxIdx]->StatusWord & RX_OK) == 0) { |
| printf("Ethernet: rx error\n"); |
| break; |
| } |
| length = rxbuf[rxIdx]->StatusWord & 0x000007FF; |
| if (length <= 4) { |
| printf("Ethernet: bad frame\n"); |
| break; |
| } |
| NetRxPackets[rxIdx] = |
| (volatile uchar *)(rxbuf[rxIdx]->FrmData->Dest); |
| NetReceive(NetRxPackets[rxIdx], length - 4); |
| *pDMA1_IRQ_STATUS |= DMA_DONE | DMA_ERR; |
| rxbuf[rxIdx]->StatusWord = 0x00000000; |
| if ((rxIdx + 1) >= PKTBUFSRX) |
| rxIdx = 0; |
| else |
| rxIdx++; |
| } |
| |
| return length; |
| } |
| |
| /************************************************************** |
| * |
| * Ethernet Initialization Routine |
| * |
| *************************************************************/ |
| |
| static int bfin_EMAC_init(struct eth_device *dev, bd_t * bd) |
| { |
| u32 opmode; |
| int dat; |
| int i; |
| DEBUGF("Eth_init: ......\n"); |
| |
| txIdx = 0; |
| rxIdx = 0; |
| |
| /* Initialize System Register */ |
| if (SetupSystemRegs(&dat) < 0) |
| return -1; |
| |
| /* Initialize EMAC address */ |
| SetupMacAddr(SrcAddr); |
| |
| /* Initialize TX and RX buffer */ |
| for (i = 0; i < PKTBUFSRX; i++) { |
| rxbuf[i] = SetupRxBuffer(i); |
| if (i > 0) { |
| rxbuf[i - 1]->Dma[1].NEXT_DESC_PTR = |
| &(rxbuf[i]->Dma[0]); |
| if (i == (PKTBUFSRX - 1)) |
| rxbuf[i]->Dma[1].NEXT_DESC_PTR = |
| &(rxbuf[0]->Dma[0]); |
| } |
| } |
| for (i = 0; i < TX_BUF_CNT; i++) { |
| txbuf[i] = SetupTxBuffer(i); |
| if (i > 0) { |
| txbuf[i - 1]->Dma[1].NEXT_DESC_PTR = |
| &(txbuf[i]->Dma[0]); |
| if (i == (TX_BUF_CNT - 1)) |
| txbuf[i]->Dma[1].NEXT_DESC_PTR = |
| &(txbuf[0]->Dma[0]); |
| } |
| } |
| |
| /* Set RX DMA */ |
| *pDMA1_NEXT_DESC_PTR = &rxbuf[0]->Dma[0]; |
| *pDMA1_CONFIG = *((u16 *) (void *)&rxbuf[0]->Dma[0].CONFIG); |
| |
| /* Wait MII done */ |
| PollMdcDone(); |
| |
| /* We enable only RX here */ |
| /* ASTP : Enable Automatic Pad Stripping |
| PR : Promiscuous Mode for test |
| PSF : Receive frames with total length less than 64 bytes. |
| FDMODE : Full Duplex Mode |
| LB : Internal Loopback for test |
| RE : Receiver Enable */ |
| if (dat == FDMODE) |
| opmode = ASTP | FDMODE | PSF; |
| else |
| opmode = ASTP | PSF; |
| opmode |= RE; |
| #ifdef CONFIG_BFIN_MAC_RMII |
| opmode |= TE | RMII; |
| #endif |
| /* Turn on the EMAC */ |
| *pEMAC_OPMODE = opmode; |
| return 0; |
| } |
| |
| static void bfin_EMAC_halt(struct eth_device *dev) |
| { |
| DEBUGF("Eth_halt: ......\n"); |
| /* Turn off the EMAC */ |
| *pEMAC_OPMODE = 0x00000000; |
| /* Turn off the EMAC RX DMA */ |
| *pDMA1_CONFIG = 0x0000; |
| *pDMA2_CONFIG = 0x0000; |
| |
| } |
| |
| void SetupMacAddr(u8 * MACaddr) |
| { |
| char *tmp, *end; |
| int i; |
| /* this depends on a little-endian machine */ |
| tmp = getenv("ethaddr"); |
| if (tmp) { |
| for (i = 0; i < 6; i++) { |
| MACaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0; |
| if (tmp) |
| tmp = (*end) ? end + 1 : end; |
| } |
| |
| #ifndef CONFIG_NETCONSOLE |
| printf("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n", |
| MACaddr[0], MACaddr[1], |
| MACaddr[2], MACaddr[3], MACaddr[4], MACaddr[5]); |
| #endif |
| *pEMAC_ADDRLO = MACaddr[0] | MACaddr[1] << 8 | |
| MACaddr[2] << 16 | MACaddr[3] << 24; |
| *pEMAC_ADDRHI = MACaddr[4] | MACaddr[5] << 8; |
| } |
| } |
| |
| void PollMdcDone(void) |
| { |
| /* poll the STABUSY bit */ |
| while (*pEMAC_STAADD & STABUSY) ; |
| } |
| |
| void WrPHYReg(u16 PHYAddr, u16 RegAddr, u16 Data) |
| { |
| PollMdcDone(); |
| |
| *pEMAC_STADAT = Data; |
| |
| *pEMAC_STAADD = SET_PHYAD(PHYAddr) | SET_REGAD(RegAddr) | |
| STAOP | STAIE | STABUSY; |
| } |
| |
| /********************************************************************************* |
| * Read an off-chip register in a PHY through the MDC/MDIO port * |
| *********************************************************************************/ |
| u16 RdPHYReg(u16 PHYAddr, u16 RegAddr) |
| { |
| u16 Data; |
| |
| PollMdcDone(); |
| |
| *pEMAC_STAADD = SET_PHYAD(PHYAddr) | SET_REGAD(RegAddr) | |
| STAIE | STABUSY; |
| |
| PollMdcDone(); |
| |
| Data = (u16) * pEMAC_STADAT; |
| |
| PHYregs[RegAddr] = Data; /* save shadow copy */ |
| |
| return Data; |
| } |
| |
| void SoftResetPHY(void) |
| { |
| u16 phydat; |
| /* set the reset bit */ |
| WrPHYReg(PHYADDR, PHY_MODECTL, PHY_RESET); |
| /* and clear it again */ |
| WrPHYReg(PHYADDR, PHY_MODECTL, 0x0000); |
| do { |
| /* poll until reset is complete */ |
| phydat = RdPHYReg(PHYADDR, PHY_MODECTL); |
| } while ((phydat & PHY_RESET) != 0); |
| } |
| |
| int SetupSystemRegs(int *opmode) |
| { |
| u16 sysctl, phydat; |
| int count = 0; |
| /* Enable PHY output */ |
| *pVR_CTL |= PHYCLKOE; |
| /* MDC = 2.5 MHz */ |
| sysctl = SET_MDCDIV(24); |
| /* Odd word alignment for Receive Frame DMA word */ |
| /* Configure checksum support and rcve frame word alignment */ |
| sysctl |= RXDWA | RXCKS; |
| *pEMAC_SYSCTL = sysctl; |
| /* auto negotiation on */ |
| /* full duplex */ |
| /* 100 Mbps */ |
| phydat = PHY_ANEG_EN | PHY_DUPLEX | PHY_SPD_SET; |
| WrPHYReg(PHYADDR, PHY_MODECTL, phydat); |
| do { |
| udelay(1000); |
| phydat = RdPHYReg(PHYADDR, PHY_MODESTAT); |
| if (count > 3000) { |
| printf |
| ("Link is down, please check your network connection\n"); |
| return -1; |
| } |
| count++; |
| } while (!(phydat & 0x0004)); |
| |
| phydat = RdPHYReg(PHYADDR, PHY_ANLPAR); |
| |
| if ((phydat & 0x0100) || (phydat & 0x0040)) |
| *opmode = FDMODE; |
| else |
| *opmode = 0; |
| |
| *pEMAC_MMC_CTL = RSTC | CROLL; |
| |
| /* Initialize the TX DMA channel registers */ |
| *pDMA2_X_COUNT = 0; |
| *pDMA2_X_MODIFY = 4; |
| *pDMA2_Y_COUNT = 0; |
| *pDMA2_Y_MODIFY = 0; |
| |
| /* Initialize the RX DMA channel registers */ |
| *pDMA1_X_COUNT = 0; |
| *pDMA1_X_MODIFY = 4; |
| *pDMA1_Y_COUNT = 0; |
| *pDMA1_Y_MODIFY = 0; |
| return 0; |
| } |
| |
| ADI_ETHER_BUFFER *SetupRxBuffer(int no) |
| { |
| ADI_ETHER_FRAME_BUFFER *frmbuf; |
| ADI_ETHER_BUFFER *buf; |
| int nobytes_buffer = sizeof(ADI_ETHER_BUFFER[2]) / 2; /* ensure a multi. of 4 */ |
| int total_size = nobytes_buffer + RECV_BUFSIZE; |
| |
| buf = (ADI_ETHER_BUFFER *) (RXBUF_BASE_ADDR + no * total_size); |
| frmbuf = |
| (ADI_ETHER_FRAME_BUFFER *) (RXBUF_BASE_ADDR + no * total_size + |
| nobytes_buffer); |
| |
| memset(buf, 0x00, nobytes_buffer); |
| buf->FrmData = frmbuf; |
| memset(frmbuf, 0xfe, RECV_BUFSIZE); |
| |
| /* set up first desc to point to receive frame buffer */ |
| buf->Dma[0].NEXT_DESC_PTR = &(buf->Dma[1]); |
| buf->Dma[0].START_ADDR = (u32) buf->FrmData; |
| buf->Dma[0].CONFIG.b_DMA_EN = 1; /* enabled */ |
| buf->Dma[0].CONFIG.b_WNR = 1; /* Write to memory */ |
| buf->Dma[0].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */ |
| buf->Dma[0].CONFIG.b_NDSIZE = 5; /* 5 half words is desc size. */ |
| buf->Dma[0].CONFIG.b_FLOW = 7; /* large desc flow */ |
| |
| /* set up second desc to point to status word */ |
| buf->Dma[1].NEXT_DESC_PTR = &(buf->Dma[0]); |
| buf->Dma[1].START_ADDR = (u32) & buf->IPHdrChksum; |
| buf->Dma[1].CONFIG.b_DMA_EN = 1; /* enabled */ |
| buf->Dma[1].CONFIG.b_WNR = 1; /* Write to memory */ |
| buf->Dma[1].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */ |
| buf->Dma[1].CONFIG.b_DI_EN = 1; /* enable interrupt */ |
| buf->Dma[1].CONFIG.b_NDSIZE = 5; /* must be 0 when FLOW is 0 */ |
| buf->Dma[1].CONFIG.b_FLOW = 7; /* stop */ |
| |
| return buf; |
| } |
| |
| ADI_ETHER_BUFFER *SetupTxBuffer(int no) |
| { |
| ADI_ETHER_FRAME_BUFFER *frmbuf; |
| ADI_ETHER_BUFFER *buf; |
| int nobytes_buffer = sizeof(ADI_ETHER_BUFFER[2]) / 2; /* ensure a multi. of 4 */ |
| int total_size = nobytes_buffer + RECV_BUFSIZE; |
| |
| buf = (ADI_ETHER_BUFFER *) (TXBUF_BASE_ADDR + no * total_size); |
| frmbuf = |
| (ADI_ETHER_FRAME_BUFFER *) (TXBUF_BASE_ADDR + no * total_size + |
| nobytes_buffer); |
| |
| memset(buf, 0x00, nobytes_buffer); |
| buf->FrmData = frmbuf; |
| memset(frmbuf, 0x00, RECV_BUFSIZE); |
| |
| /* set up first desc to point to receive frame buffer */ |
| buf->Dma[0].NEXT_DESC_PTR = &(buf->Dma[1]); |
| buf->Dma[0].START_ADDR = (u32) buf->FrmData; |
| buf->Dma[0].CONFIG.b_DMA_EN = 1; /* enabled */ |
| buf->Dma[0].CONFIG.b_WNR = 0; /* Read to memory */ |
| buf->Dma[0].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */ |
| buf->Dma[0].CONFIG.b_NDSIZE = 5; /* 5 half words is desc size. */ |
| buf->Dma[0].CONFIG.b_FLOW = 7; /* large desc flow */ |
| |
| /* set up second desc to point to status word */ |
| buf->Dma[1].NEXT_DESC_PTR = &(buf->Dma[0]); |
| buf->Dma[1].START_ADDR = (u32) & buf->StatusWord; |
| buf->Dma[1].CONFIG.b_DMA_EN = 1; /* enabled */ |
| buf->Dma[1].CONFIG.b_WNR = 1; /* Write to memory */ |
| buf->Dma[1].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */ |
| buf->Dma[1].CONFIG.b_DI_EN = 1; /* enable interrupt */ |
| buf->Dma[1].CONFIG.b_NDSIZE = 0; /* must be 0 when FLOW is 0 */ |
| buf->Dma[1].CONFIG.b_FLOW = 0; /* stop */ |
| |
| return buf; |
| } |
| |
| #if defined(CONFIG_POST) && defined(CFG_POST_ETHER) |
| int ether_post_test(int flags) |
| { |
| uchar buf[64]; |
| int i, value = 0; |
| int length; |
| |
| printf("\n--------"); |
| bfin_EMAC_init(NULL, NULL); |
| /* construct the package */ |
| buf[0] = buf[6] = (unsigned char)(*pEMAC_ADDRLO & 0xFF); |
| buf[1] = buf[7] = (unsigned char)((*pEMAC_ADDRLO & 0xFF00) >> 8); |
| buf[2] = buf[8] = (unsigned char)((*pEMAC_ADDRLO & 0xFF0000) >> 16); |
| buf[3] = buf[9] = (unsigned char)((*pEMAC_ADDRLO & 0xFF000000) >> 24); |
| buf[4] = buf[10] = (unsigned char)(*pEMAC_ADDRHI & 0xFF); |
| buf[5] = buf[11] = (unsigned char)((*pEMAC_ADDRHI & 0xFF00) >> 8); |
| buf[12] = 0x08; /* Type: ARP */ |
| buf[13] = 0x06; |
| buf[14] = 0x00; /* Hardware type: Ethernet */ |
| buf[15] = 0x01; |
| buf[16] = 0x08; /* Protocal type: IP */ |
| buf[17] = 0x00; |
| buf[18] = 0x06; /* Hardware size */ |
| buf[19] = 0x04; /* Protocol size */ |
| buf[20] = 0x00; /* Opcode: request */ |
| buf[21] = 0x01; |
| |
| for (i = 0; i < 42; i++) |
| buf[i + 22] = i; |
| printf("--------Send 64 bytes......\n"); |
| bfin_EMAC_send(NULL, (volatile void *)buf, 64); |
| for (i = 0; i < 100; i++) { |
| udelay(10000); |
| if ((rxbuf[rxIdx]->StatusWord & RX_COMP) != 0) { |
| value = 1; |
| break; |
| } |
| } |
| if (value == 0) { |
| printf("--------EMAC can't receive any data\n"); |
| eth_halt(); |
| return -1; |
| } |
| length = rxbuf[rxIdx]->StatusWord & 0x000007FF - 4; |
| for (i = 0; i < length; i++) { |
| if (rxbuf[rxIdx]->FrmData->Dest[i] != buf[i]) { |
| printf("--------EMAC receive error data!\n"); |
| eth_halt(); |
| return -1; |
| } |
| } |
| printf("--------receive %d bytes, matched\n", length); |
| bfin_EMAC_halt(NULL); |
| return 0; |
| } |
| #endif |
| #endif /* CFG_CMD_NET */ |