blob: a7d0edcf0aa94c39238da0fae630653c4fbd9076 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP ls1088a QDS common board device tree source
*
* Copyright 2017-2020 NXP
*/
#include "fsl-ls1088a.dtsi"
/ {
aliases {
spi0 = &qspi;
spi1 = &dspi;
};
};
&emdio1 {
status = "okay";
};
&emdio2 {
status = "okay";
};
&i2c0 {
status = "okay";
u-boot,dm-pre-reloc;
fpga@66 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "simple-mfd";
reg = <0x66>;
mux-mdio@54 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mdio-mux-i2creg";
reg = <0x54>;
#mux-control-cells = <1>;
mux-reg-masks = <0x54 0xe0>; // reg 0x54, bits 7:5
mdio-parent-bus = <&emdio1>;
mdio@00 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x00>;
rgmii_phy1: ethernet-phy@1 {
reg = <0x1>;
};
};
mdio@20 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x20>;
rgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
};
};
emdio1_slot1: mdio@40 { /* I/O Slot #1 */
reg = <0x40>;
device-name = "emdio1_slot1";
#address-cells = <1>;
#size-cells = <0>;
};
emdio1_slot3: mdio@60 { /* I/O Slot #3 */
reg = <0x60>;
device-name = "emdio1_slot3";
#address-cells = <1>;
#size-cells = <0>;
};
};
};
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
rtc@51 {
compatible = "pcf2127-rtc";
reg = <0x51>;
};
};
};
};
&ifc {
#address-cells = <2>;
#size-cells = <1>;
/* NOR, NAND Flashes and FPGA on board */
ranges = <0 0 0x5 0x80000000 0x08000000
2 0 0x5 0x30000000 0x00010000
3 0 0x5 0x20000000 0x00010000>;
status = "okay";
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@2,0 {
compatible = "fsl,ifc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x1 0x0 0x10000>;
};
fpga: board-control@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus", "fsl,ls1088aqds-fpga",
"fsl,fpga-qixis";
reg = <0x2 0x0 0x0000100>;
bank-width = <1>;
device-width = <1>;
ranges = <0 2 0 0x100>;
};
};
&dspi {
bus-num = <0>;
status = "okay";
dflash0: n25q128a {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <1000000>; /* input clock */
};
dflash1: sst25wf040b {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <3500000>;
reg = <1>;
};
dflash2: en25s64 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <3500000>;
reg = <2>;
};
};
&qspi {
status = "okay";
s25fs512s0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
};
s25fs512s1: flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <1>;
};
};
&sata {
status = "okay";
};