blob: 096ebbd16c84e0b2dd18d0270745bd1ba0c3b485 [file] [log] [blame]
/*
* (C) Copyright 2004
* DAVE Srl
* http://www.dave-tech.it
* http://www.wawnet.biz
* mailto:info@wawnet.biz
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#include <asm/hardware.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialization
*/
int board_init (void)
{
u32 temp;
/* Configuration Port Control Register*/
/* Port A */
PCONA = 0x3ff;
/* Port B */
PCONB = 0xff;
PDATB = 0xFFFF;
/* Port C */
/*
PCONC = 0xff55ff15;
PDATC = 0x0;
PUPC = 0xffff;
*/
/* Port D */
/*
PCOND = 0xaaaa;
PUPD = 0xff;
*/
/* Port E */
PCONE = 0x0001aaa9;
PDATE = 0x0;
PUPE = 0xff;
/* Port F */
PCONF = 0x124955;
PDATF = 0xff; /* B2-eth_reset tied high level */
/*
PUPF = 0x1e3;
*/
/* Port G */
PUPG = 0x1;
PCONG = 0x3; /*PG0= EINT0= ETH_INT prepared for linux kernel*/
INTMSK = 0x03fffeff;
INTCON = 0x05;
/*
Configure chip ethernet interrupt as High level
Port G EINT 0-7 EINT0 -> CHIP ETHERNET
*/
temp = EXTINT;
temp &= ~0x7;
temp |= 0x1; /*LEVEL_HIGH*/
EXTINT = temp;
/*
Reset SMSC LAN91C96 chip
*/
temp= PCONF;
temp |= 0x00000040;
PCONF = temp;
/* Reset high */
temp = PDATF;
temp |= (1 << 3);
PDATF = temp;
/* Short delay */
for (temp=0;temp<10;temp++)
{
/* NOP */
}
/* Reset low */
temp = PDATF;
temp &= ~(1 << 3);
PDATF = temp;
/* arch number MACH_TYPE_MBA44B0 */
gd->bd->bi_arch_number = MACH_TYPE_S3C44B0;
/* location of boot parameters */
gd->bd->bi_boot_params = 0x0c000100;
return 0;
}
int dram_init (void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return (0);
}
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_LAN91C96
rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
#endif
return rc;
}
#endif