| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2000-2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * Copyright (C) 2004-2008, 2012 Freescale Semiconductor, Inc. |
| * TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
| */ |
| |
| #include <common.h> |
| #include <init.h> |
| #include <spi.h> |
| #include <asm/global_data.h> |
| #include <asm/immap.h> |
| #include <asm/io.h> |
| #include <linux/delay.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int checkboard(void) |
| { |
| /* |
| * need to to: |
| * Check serial flash size. if 2mb evb, else 8mb demo |
| */ |
| puts("Board: "); |
| puts("Freescale M54451 EVB\n"); |
| return 0; |
| }; |
| |
| int dram_init(void) |
| { |
| u32 dramsize; |
| #ifdef CONFIG_CF_SBF |
| /* |
| * Serial Boot: The dram is already initialized in start.S |
| * only require to return DRAM size |
| */ |
| dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; |
| #else |
| sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM); |
| gpio_t *gpio = (gpio_t *)(MMAP_GPIO); |
| u32 i; |
| |
| dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; |
| |
| if ((in_be32(&sdram->sdcfg1) == CONFIG_SYS_SDRAM_CFG1) && |
| (in_be32(&sdram->sdcfg2) == CONFIG_SYS_SDRAM_CFG2)) |
| return dramsize; |
| |
| for (i = 0x13; i < 0x20; i++) { |
| if (dramsize == (1 << i)) |
| break; |
| } |
| i--; |
| |
| out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH); |
| |
| out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i); |
| |
| out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1); |
| out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2); |
| |
| udelay(200); |
| |
| /* Issue PALL */ |
| out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2); |
| __asm__("nop"); |
| |
| /* Perform two refresh cycles */ |
| out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4); |
| __asm__("nop"); |
| out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4); |
| __asm__("nop"); |
| |
| /* Issue LEMR */ |
| out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE); |
| __asm__("nop"); |
| out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE); |
| __asm__("nop"); |
| |
| out_be32(&sdram->sdcr, |
| (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000000); |
| |
| udelay(100); |
| #endif |
| gd->ram_size = dramsize; |
| |
| return 0; |
| }; |
| |
| int testdram(void) |
| { |
| /* TODO: XXX XXX XXX */ |
| printf("DRAM test not implemented!\n"); |
| |
| return (0); |
| } |