| /* |
| * (C) Copyright 2001 |
| * Denis Peter, MPL AG Switzerland |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| * |
| * Note: Part of this code has been derived from linux |
| */ |
| #ifndef _USB_UHCI_H_ |
| #define _USB_UHCI_H_ |
| |
| |
| /* Command register */ |
| #define USBCMD 0 |
| #define USBCMD_RS 0x0001 /* Run/Stop */ |
| #define USBCMD_HCRESET 0x0002 /* Host reset */ |
| #define USBCMD_GRESET 0x0004 /* Global reset */ |
| #define USBCMD_EGSM 0x0008 /* Global Suspend Mode */ |
| #define USBCMD_FGR 0x0010 /* Force Global Resume */ |
| #define USBCMD_SWDBG 0x0020 /* SW Debug mode */ |
| #define USBCMD_CF 0x0040 /* Config Flag (sw only) */ |
| #define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */ |
| |
| /* Status register */ |
| #define USBSTS 2 |
| #define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */ |
| #define USBSTS_ERROR 0x0002 /* Interrupt due to error */ |
| #define USBSTS_RD 0x0004 /* Resume Detect */ |
| #define USBSTS_HSE 0x0008 /* Host System Error - basically PCI problems */ |
| #define USBSTS_HCPE 0x0010 /* Host Controller Process Error - the scripts were buggy */ |
| #define USBSTS_HCH 0x0020 /* HC Halted */ |
| |
| /* Interrupt enable register */ |
| #define USBINTR 4 |
| #define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */ |
| #define USBINTR_RESUME 0x0002 /* Resume interrupt enable */ |
| #define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */ |
| #define USBINTR_SP 0x0008 /* Short packet interrupt enable */ |
| |
| #define USBFRNUM 6 |
| #define USBFLBASEADD 8 |
| #define USBSOF 12 |
| |
| /* USB port status and control registers */ |
| #define USBPORTSC1 16 |
| #define USBPORTSC2 18 |
| #define USBPORTSC_CCS 0x0001 /* Current Connect Status ("device present") */ |
| #define USBPORTSC_CSC 0x0002 /* Connect Status Change */ |
| #define USBPORTSC_PE 0x0004 /* Port Enable */ |
| #define USBPORTSC_PEC 0x0008 /* Port Enable Change */ |
| #define USBPORTSC_LS 0x0030 /* Line Status */ |
| #define USBPORTSC_RD 0x0040 /* Resume Detect */ |
| #define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */ |
| #define USBPORTSC_PR 0x0200 /* Port Reset */ |
| #define USBPORTSC_SUSP 0x1000 /* Suspend */ |
| |
| /* Legacy support register */ |
| #define USBLEGSUP 0xc0 |
| #define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ |
| |
| #define UHCI_NULL_DATA_SIZE 0x7ff /* for UHCI controller TD */ |
| #define UHCI_PID 0xff /* PID MASK */ |
| |
| #define UHCI_PTR_BITS 0x000F |
| #define UHCI_PTR_TERM 0x0001 |
| #define UHCI_PTR_QH 0x0002 |
| #define UHCI_PTR_DEPTH 0x0004 |
| |
| /* for TD <status>: */ |
| #define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */ |
| #define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */ |
| #define TD_CTRL_LS (1 << 26) /* Low Speed Device */ |
| #define TD_CTRL_IOS (1 << 25) /* Isochronous Select */ |
| #define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */ |
| #define TD_CTRL_ACTIVE (1 << 23) /* TD Active */ |
| #define TD_CTRL_STALLED (1 << 22) /* TD Stalled */ |
| #define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */ |
| #define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */ |
| #define TD_CTRL_NAK (1 << 19) /* NAK Received */ |
| #define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */ |
| #define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */ |
| #define TD_CTRL_ACTLEN_MASK 0x7ff /* actual length, encoded as n - 1 */ |
| |
| #define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \ |
| TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF) |
| |
| #define TD_TOKEN_TOGGLE 19 |
| |
| /* ------------------------------------------------------------------------------------ |
| Virtual Root HUB |
| ------------------------------------------------------------------------------------ */ |
| /* destination of request */ |
| #define RH_INTERFACE 0x01 |
| #define RH_ENDPOINT 0x02 |
| #define RH_OTHER 0x03 |
| |
| #define RH_CLASS 0x20 |
| #define RH_VENDOR 0x40 |
| |
| /* Requests: bRequest << 8 | bmRequestType */ |
| #define RH_GET_STATUS 0x0080 |
| #define RH_CLEAR_FEATURE 0x0100 |
| #define RH_SET_FEATURE 0x0300 |
| #define RH_SET_ADDRESS 0x0500 |
| #define RH_GET_DESCRIPTOR 0x0680 |
| #define RH_SET_DESCRIPTOR 0x0700 |
| #define RH_GET_CONFIGURATION 0x0880 |
| #define RH_SET_CONFIGURATION 0x0900 |
| #define RH_GET_STATE 0x0280 |
| #define RH_GET_INTERFACE 0x0A80 |
| #define RH_SET_INTERFACE 0x0B00 |
| #define RH_SYNC_FRAME 0x0C80 |
| /* Our Vendor Specific Request */ |
| #define RH_SET_EP 0x2000 |
| |
| /* Hub port features */ |
| #define RH_PORT_CONNECTION 0x00 |
| #define RH_PORT_ENABLE 0x01 |
| #define RH_PORT_SUSPEND 0x02 |
| #define RH_PORT_OVER_CURRENT 0x03 |
| #define RH_PORT_RESET 0x04 |
| #define RH_PORT_POWER 0x08 |
| #define RH_PORT_LOW_SPEED 0x09 |
| #define RH_C_PORT_CONNECTION 0x10 |
| #define RH_C_PORT_ENABLE 0x11 |
| #define RH_C_PORT_SUSPEND 0x12 |
| #define RH_C_PORT_OVER_CURRENT 0x13 |
| #define RH_C_PORT_RESET 0x14 |
| |
| /* Hub features */ |
| #define RH_C_HUB_LOCAL_POWER 0x00 |
| #define RH_C_HUB_OVER_CURRENT 0x01 |
| |
| #define RH_DEVICE_REMOTE_WAKEUP 0x00 |
| #define RH_ENDPOINT_STALL 0x01 |
| |
| /* Our Vendor Specific feature */ |
| #define RH_REMOVE_EP 0x00 |
| |
| |
| #define RH_ACK 0x01 |
| #define RH_REQ_ERR -1 |
| #define RH_NACK 0x00 |
| |
| |
| /* Transfer descriptor structure */ |
| typedef struct { |
| unsigned long link; /* next td/qh (LE)*/ |
| unsigned long status; /* status of the td */ |
| unsigned long info; /* Max Lenght / Endpoint / device address and PID */ |
| unsigned long buffer; /* pointer to data buffer (LE) */ |
| unsigned long dev_ptr; /* pointer to the assigned device (BE) */ |
| unsigned long res[3]; /* reserved (TDs must be 8Byte aligned) */ |
| } uhci_td_t, *puhci_td_t; |
| |
| /* Queue Header structure */ |
| typedef struct { |
| unsigned long head; /* Next QH (LE)*/ |
| unsigned long element; /* Queue element pointer (LE) */ |
| unsigned long res[5]; /* reserved */ |
| unsigned long dev_ptr; /* if 0 no tds have been assigned to this qh */ |
| } uhci_qh_t, *puhci_qh_t; |
| |
| struct virt_root_hub { |
| int devnum; /* Address of Root Hub endpoint */ |
| int numports; /* number of ports */ |
| int c_p_r[8]; /* C_PORT_RESET */ |
| }; |
| |
| |
| #endif /* _USB_UHCI_H_ */ |