| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * 64-bit Periodic Interval Timer driver |
| * |
| * Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries |
| * |
| * Author: Claudiu Beznea <claudiu.beznea@microchip.com> |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <timer.h> |
| #include <asm/io.h> |
| |
| #define MCHP_PIT64B_CR 0x00 /* Control Register */ |
| #define MCHP_PIT64B_CR_START BIT(0) |
| #define MCHP_PIT64B_CR_SWRST BIT(8) |
| #define MCHP_PIT64B_MR 0x04 /* Mode Register */ |
| #define MCHP_PIT64B_MR_CONT BIT(0) |
| #define MCHP_PIT64B_LSB_PR 0x08 /* LSB Period Register */ |
| #define MCHP_PIT64B_MSB_PR 0x0C /* MSB Period Register */ |
| #define MCHP_PIT64B_TLSBR 0x20 /* Timer LSB Register */ |
| #define MCHP_PIT64B_TMSBR 0x24 /* Timer MSB Register */ |
| |
| struct mchp_pit64b_priv { |
| void __iomem *base; |
| }; |
| |
| static u64 mchp_pit64b_get_count(struct udevice *dev) |
| { |
| struct mchp_pit64b_priv *priv = dev_get_priv(dev); |
| |
| u32 lsb = readl(priv->base + MCHP_PIT64B_TLSBR); |
| u32 msb = readl(priv->base + MCHP_PIT64B_TMSBR); |
| |
| return ((u64)msb << 32) | lsb; |
| } |
| |
| static int mchp_pit64b_probe(struct udevice *dev) |
| { |
| struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| struct mchp_pit64b_priv *priv = dev_get_priv(dev); |
| struct clk clk; |
| ulong rate; |
| int ret; |
| |
| priv->base = dev_read_addr_ptr(dev); |
| if (IS_ERR(priv->base)) |
| return PTR_ERR(priv->base); |
| |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret) |
| return ret; |
| |
| ret = clk_enable(&clk); |
| if (ret) |
| return ret; |
| |
| rate = clk_get_rate(&clk); |
| if (!rate) { |
| clk_disable(&clk); |
| return -ENOTSUPP; |
| } |
| |
| /* Reset the timer in case it was used by previous bootloaders. */ |
| writel(MCHP_PIT64B_CR_SWRST, priv->base + MCHP_PIT64B_CR); |
| |
| /* |
| * Use highest prescaller (for a peripheral clock running at 200MHz |
| * this will lead to the timer running at 12.5MHz) and continuous mode. |
| */ |
| writel((15 << 8) | MCHP_PIT64B_MR_CONT, priv->base + MCHP_PIT64B_MR); |
| uc_priv->clock_rate = rate / 16; |
| |
| /* |
| * Simulate free running counter by setting max values to period |
| * registers. |
| */ |
| writel(~0UL, priv->base + MCHP_PIT64B_MSB_PR); |
| writel(~0UL, priv->base + MCHP_PIT64B_LSB_PR); |
| |
| /* Start the timer. */ |
| writel(MCHP_PIT64B_CR_START, priv->base + MCHP_PIT64B_CR); |
| |
| return 0; |
| } |
| |
| static const struct timer_ops mchp_pit64b_ops = { |
| .get_count = mchp_pit64b_get_count, |
| }; |
| |
| static const struct udevice_id mchp_pit64b_ids[] = { |
| { .compatible = "microchip,sam9x60-pit64b", }, |
| { .compatible = "microchip,sama7g5-pit64b", }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(mchp_pit64b) = { |
| .name = "mchp-pit64b", |
| .id = UCLASS_TIMER, |
| .of_match = mchp_pit64b_ids, |
| .priv_auto = sizeof(struct mchp_pit64b_priv), |
| .probe = mchp_pit64b_probe, |
| .ops = &mchp_pit64b_ops, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |