| /* |
| * (C) Copyright 2005 |
| * Heiko Schocher, DENX Software Engineering, <hs@denx.de> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <ioports.h> |
| #include <mpc8260.h> |
| |
| #if defined(CONFIG_OF_LIBFDT) |
| #include <libfdt.h> |
| #include <libfdt_env.h> |
| #include <fdt_support.h> |
| #endif |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* |
| * I/O Port configuration table |
| * |
| * if conf is 1, then that port pin will be configured at boot time |
| * according to the five values podr/pdir/ppar/psor/pdat for that entry |
| */ |
| |
| const iop_conf_t iop_conf_tab[4][32] = { |
| |
| /* Port A configuration */ |
| { /* conf ppar psor pdir podr pdat */ |
| /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 COL */ |
| /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 CRS */ |
| /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXER */ |
| /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */ |
| /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */ |
| /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXER */ |
| /* PA25 */ { 0, 0, 0, 0, 1, 0 }, /* 8247_P0 */ |
| #if defined(CONFIG_SOFT_I2C) |
| /* PA24 */ { 1, 0, 0, 0, 1, 1 }, /* I2C_SDA2 */ |
| /* PA23 */ { 1, 0, 0, 1, 1, 1 }, /* I2C_SCL2 */ |
| #else /* normal I/O port pins */ |
| /* PA24 */ { 0, 0, 0, 1, 0, 0 }, /* PA24 */ |
| /* PA23 */ { 0, 0, 0, 1, 0, 0 }, /* PA23 */ |
| #endif |
| /* PA22 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DCD */ |
| /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */ |
| /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */ |
| /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */ |
| /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */ |
| /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */ |
| /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */ |
| /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */ |
| /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */ |
| /* PA13 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_RTS */ |
| /* PA12 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_CTS */ |
| /* PA11 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_DTR */ |
| /* PA10 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DSR */ |
| /* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 TXD */ |
| /* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 RXD */ |
| /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ |
| /* PA6 */ { 0, 0, 0, 1, 0, 0 }, /* PA6 */ |
| /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ |
| /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ |
| /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ |
| /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ |
| /* PA1 */ { 0, 0, 0, 1, 0, 0 }, /* PA1 */ |
| /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ |
| }, |
| |
| /* Port B configuration */ |
| { /* conf ppar psor pdir podr pdat */ |
| /* PB31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ |
| /* PB30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ |
| /* PB29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ |
| /* PB28 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ |
| /* PB27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ |
| /* PB26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ |
| /* PB25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ |
| /* PB24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ |
| /* PB23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ |
| /* PB22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ |
| /* PB21 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ |
| /* PB20 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ |
| /* PB19 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ |
| /* PB18 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ |
| /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */ |
| /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */ |
| /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* PB15 */ |
| /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* PB14 */ |
| /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */ |
| /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* PB12 */ |
| /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* PB11 */ |
| /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* PB10 */ |
| /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* PB9 */ |
| /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* PB8 */ |
| /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */ |
| /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */ |
| /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */ |
| /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */ |
| /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ |
| }, |
| |
| /* Port C */ |
| { /* conf ppar psor pdir podr pdat */ |
| /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */ |
| /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */ |
| /* PC29 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CLSN */ |
| /* PC28 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_OUT */ |
| /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* PC27 */ |
| /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ |
| /* PC25 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_IN */ |
| /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ |
| /* PC23 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */ |
| /* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */ |
| /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ |
| /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ |
| /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */ |
| /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */ |
| /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */ |
| /* PC16 */ { 0, 0, 0, 1, 0, 0 }, /* PC16 */ |
| /* PC15 */ { 0, 0, 0, 1, 0, 0 }, /* PC15 */ |
| /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */ |
| /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */ |
| /* PC12 */ { 0, 0, 0, 1, 0, 0 }, /* PC12 */ |
| /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* PC11 */ |
| /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDC */ |
| /* PC9 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDIO */ |
| /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */ |
| /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ |
| /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ |
| /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */ |
| /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */ |
| /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */ |
| /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */ |
| /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */ |
| /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */ |
| }, |
| |
| /* Port D */ |
| { /* conf ppar psor pdir podr pdat */ |
| /* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ |
| /* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ |
| /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */ |
| /* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* PD28 */ |
| /* PD27 */ { 0, 0, 0, 1, 0, 0 }, /* PD27 */ |
| /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */ |
| /* PD25 */ { 0, 1, 0, 0, 0, 0 }, /* SCC3_RX */ |
| /* PD24 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_TX */ |
| /* PD23 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_RTS */ |
| /* PD22 */ { 0, 1, 0, 0, 0, 0 }, /* SCC4_RXD */ |
| /* PD21 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_TXD */ |
| /* PD20 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_RTS */ |
| /* PD19 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_SEL */ |
| /* PD18 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_CLK */ |
| /* PD17 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MOSI */ |
| /* PD16 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MISO */ |
| #if defined(CONFIG_HARD_I2C) |
| /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA1 */ |
| /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL1 */ |
| #else /* normal I/O port pins */ |
| /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* PD15 */ |
| /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* PD14 */ |
| #endif |
| /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ |
| /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ |
| /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ |
| /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ |
| /* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */ |
| /* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */ |
| /* PD7 */ { 1, 0, 0, 1, 0, 1 }, /* MII_MDIO */ |
| /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ |
| /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ |
| /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ |
| /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ |
| } |
| }; |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* Check Board Identity: |
| */ |
| int checkboard (void) |
| { |
| puts ("Board: IDS 8247\n"); |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx |
| * |
| * This routine performs standard 8260 initialization sequence |
| * and calculates the available memory size. It may be called |
| * several times to try different SDRAM configurations on both |
| * 60x and local buses. |
| */ |
| static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, |
| ulong orx, volatile uchar * base) |
| { |
| volatile uchar c = 0xff; |
| volatile uint *sdmr_ptr; |
| volatile uint *orx_ptr; |
| ulong maxsize, size; |
| int i; |
| |
| /* We must be able to test a location outsize the maximum legal size |
| * to find out THAT we are outside; but this address still has to be |
| * mapped by the controller. That means, that the initial mapping has |
| * to be (at least) twice as large as the maximum expected size. |
| */ |
| maxsize = (1 + (~orx | 0x7fff))/* / 2*/; |
| |
| sdmr_ptr = &memctl->memc_psdmr; |
| orx_ptr = &memctl->memc_or2; |
| |
| *orx_ptr = orx; |
| |
| /* |
| * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): |
| * |
| * "At system reset, initialization software must set up the |
| * programmable parameters in the memory controller banks registers |
| * (ORx, BRx, P/LSDMR). After all memory parameters are configured, |
| * system software should execute the following initialization sequence |
| * for each SDRAM device. |
| * |
| * 1. Issue a PRECHARGE-ALL-BANKS command |
| * 2. Issue eight CBR REFRESH commands |
| * 3. Issue a MODE-SET command to initialize the mode register |
| * |
| * The initial commands are executed by setting P/LSDMR[OP] and |
| * accessing the SDRAM with a single-byte transaction." |
| * |
| * The appropriate BRx/ORx registers have already been set when we |
| * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE. |
| */ |
| |
| *sdmr_ptr = sdmr | PSDMR_OP_PREA; |
| *base = c; |
| |
| *sdmr_ptr = sdmr | PSDMR_OP_CBRR; |
| for (i = 0; i < 8; i++) |
| *base = c; |
| |
| *sdmr_ptr = sdmr | PSDMR_OP_MRW; |
| *(base + CFG_MRS_OFFS) = c; /* setting MR on address lines */ |
| |
| *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; |
| *base = c; |
| |
| size = get_ram_size((long *)base, maxsize); |
| *orx_ptr = orx | ~(size - 1); |
| |
| return (size); |
| } |
| |
| phys_size_t initdram (int board_type) |
| { |
| volatile immap_t *immap = (immap_t *) CFG_IMMR; |
| volatile memctl8260_t *memctl = &immap->im_memctl; |
| |
| long psize, lsize; |
| |
| psize = 16 * 1024 * 1024; |
| lsize = 0; |
| |
| memctl->memc_psrt = CFG_PSRT; |
| memctl->memc_mptpr = CFG_MPTPR; |
| |
| #ifndef CFG_RAMBOOT |
| /* 60x SDRAM setup: |
| */ |
| psize = try_init (memctl, CFG_PSDMR, CFG_OR2, |
| (uchar *) CFG_SDRAM_BASE); |
| #endif /* CFG_RAMBOOT */ |
| |
| icache_enable (); |
| |
| return (psize); |
| } |
| |
| int misc_init_r (void) |
| { |
| gd->bd->bi_flashstart = 0xff800000; |
| } |
| |
| #if defined(CONFIG_CMD_NAND) |
| extern ulong |
| nand_probe (ulong physadr); |
| |
| void |
| nand_init (void) |
| { |
| ulong totlen = 0; |
| |
| debug ("Probing at 0x%.8x\n", CFG_NAND0_BASE); |
| totlen += nand_probe (CFG_NAND0_BASE); |
| |
| printf ("%4lu MB\n", totlen >>20); |
| } |
| |
| #endif /* CFG_CMD_NAND */ |
| |
| #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) |
| /* |
| * update "memory" property in the blob |
| */ |
| void ft_blob_update(void *blob, bd_t *bd) |
| { |
| int ret; |
| |
| ret = fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); |
| |
| if (ret < 0) { |
| printf("ft_blob_update(): cannot set /memory/reg " |
| "property err:%s\n", fdt_strerror(ret)); |
| } |
| } |
| |
| void ft_board_setup(void *blob, bd_t *bd) |
| { |
| ft_cpu_setup( blob, bd); |
| ft_blob_update(blob, bd); |
| } |
| #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ |