| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * board/renesas/stout/stout_spl.c |
| * |
| * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com> |
| */ |
| |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <init.h> |
| #include <malloc.h> |
| #include <dm/platform_data/serial_sh.h> |
| #include <asm/processor.h> |
| #include <asm/mach-types.h> |
| #include <asm/io.h> |
| #include <linux/bitops.h> |
| #include <linux/errno.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/gpio.h> |
| #include <asm/arch/rmobile.h> |
| #include <asm/arch/rcar-mstp.h> |
| |
| #include <spl.h> |
| |
| #define TMU0_MSTP125 BIT(25) |
| #define SCIFA0_MSTP204 BIT(4) |
| #define QSPI_MSTP917 BIT(17) |
| |
| #define SD2CKCR 0xE615026C |
| #define SD_97500KHZ 0x7 |
| |
| struct reg_config { |
| u16 off; |
| u32 val; |
| }; |
| |
| static void dbsc_wait(u16 reg) |
| { |
| static const u32 dbsc3_0_base = DBSC3_0_BASE; |
| static const u32 dbsc3_1_base = DBSC3_0_BASE + 0x10000; |
| |
| while (!(readl(dbsc3_0_base + reg) & BIT(0))) |
| ; |
| |
| while (!(readl(dbsc3_1_base + reg) & BIT(0))) |
| ; |
| } |
| |
| static void spl_init_sys(void) |
| { |
| u32 r0 = 0; |
| |
| writel(0xa5a5a500, 0xe6020004); |
| writel(0xa5a5a500, 0xe6030004); |
| |
| asm volatile( |
| /* ICIALLU - Invalidate I$ to PoU */ |
| "mcr 15, 0, %0, cr7, cr5, 0 \n" |
| /* BPIALL - Invalidate branch predictors */ |
| "mcr 15, 0, %0, cr7, cr5, 6 \n" |
| /* Set SCTLR[IZ] */ |
| "mrc 15, 0, %0, cr1, cr0, 0 \n" |
| "orr %0, #0x1800 \n" |
| "mcr 15, 0, %0, cr1, cr0, 0 \n" |
| "isb sy \n" |
| :"=r"(r0)); |
| } |
| |
| static void spl_init_pfc(void) |
| { |
| static const struct reg_config pfc_with_unlock[] = { |
| { 0x0090, 0x00140300 }, |
| { 0x0094, 0x09500000 }, |
| { 0x0098, 0xc0000084 }, |
| { 0x0020, 0x01a33492 }, |
| { 0x0024, 0x10000000 }, |
| { 0x0028, 0x08449252 }, |
| { 0x002c, 0x2925b322 }, |
| { 0x0030, 0x0c311249 }, |
| { 0x0034, 0x10124000 }, |
| { 0x0038, 0x00001295 }, |
| { 0x003c, 0x50890000 }, |
| { 0x0040, 0x0eaa56aa }, |
| { 0x0044, 0x55550000 }, |
| { 0x0048, 0x00000005 }, |
| { 0x004c, 0x54800000 }, |
| { 0x0050, 0x3736db55 }, |
| { 0x0054, 0x29148da3 }, |
| { 0x0058, 0x48c446e1 }, |
| { 0x005c, 0x2a3a54dc }, |
| { 0x0160, 0x00000023 }, |
| { 0x0004, 0xfca0ffff }, |
| { 0x0008, 0x3fbffbf0 }, |
| { 0x000c, 0x3ffdffff }, |
| { 0x0010, 0x00ffffff }, |
| { 0x0014, 0xfc3ffff3 }, |
| { 0x0018, 0xe4fdfff7 }, |
| }; |
| |
| static const struct reg_config pfc_without_unlock[] = { |
| { 0x0104, 0xffffbfff }, |
| { 0x0108, 0xb1ffffe1 }, |
| { 0x010c, 0xffffffff }, |
| { 0x0110, 0xffffffff }, |
| { 0x0114, 0xe047beab }, |
| { 0x0118, 0x00000203 }, |
| }; |
| |
| static const u32 pfc_base = 0xe6060000; |
| |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(pfc_with_unlock); i++) { |
| writel(~pfc_with_unlock[i].val, pfc_base); |
| writel(pfc_with_unlock[i].val, |
| pfc_base | pfc_with_unlock[i].off); |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(pfc_without_unlock); i++) |
| writel(pfc_without_unlock[i].val, |
| pfc_base | pfc_without_unlock[i].off); |
| } |
| |
| static void spl_init_gpio(void) |
| { |
| static const u16 gpio_offs[] = { |
| 0x1000, 0x3000, 0x4000, 0x5000 |
| }; |
| |
| static const struct reg_config gpio_set[] = { |
| { 0x4000, 0x00c00000 }, |
| { 0x5000, 0x63020000 }, |
| }; |
| |
| static const struct reg_config gpio_clr[] = { |
| { 0x1000, 0x00000000 }, |
| { 0x3000, 0x00000000 }, |
| { 0x4000, 0x00c00000 }, |
| { 0x5000, 0xe3020000 }, |
| }; |
| |
| static const u32 gpio_base = 0xe6050000; |
| |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(gpio_offs); i++) |
| writel(0, gpio_base | 0x20 | gpio_offs[i]); |
| |
| for (i = 0; i < ARRAY_SIZE(gpio_offs); i++) |
| writel(0, gpio_base | 0x00 | gpio_offs[i]); |
| |
| for (i = 0; i < ARRAY_SIZE(gpio_set); i++) |
| writel(gpio_set[i].val, gpio_base | 0x08 | gpio_set[i].off); |
| |
| for (i = 0; i < ARRAY_SIZE(gpio_clr); i++) |
| writel(gpio_clr[i].val, gpio_base | 0x04 | gpio_clr[i].off); |
| } |
| |
| static void spl_init_lbsc(void) |
| { |
| static const struct reg_config lbsc_config[] = { |
| { 0x00, 0x00000020 }, |
| { 0x08, 0x00002020 }, |
| { 0x30, 0x02150326 }, |
| { 0x38, 0x077f077f }, |
| }; |
| |
| static const u16 lbsc_offs[] = { |
| 0x80, 0x84, 0x88, 0x8c, 0xa0, 0xc0, 0xc4, 0xc8, 0x180 |
| }; |
| |
| static const u32 lbsc_base = 0xfec00200; |
| |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(lbsc_config); i++) { |
| writel(lbsc_config[i].val, |
| lbsc_base | lbsc_config[i].off); |
| writel(lbsc_config[i].val, |
| lbsc_base | (lbsc_config[i].off + 4)); |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(lbsc_offs); i++) |
| writel(0, lbsc_base | lbsc_offs[i]); |
| } |
| |
| static void spl_init_dbsc(void) |
| { |
| static const struct reg_config dbsc_config1[] = { |
| { 0x0280, 0x0000a55a }, |
| { 0x0018, 0x21000000 }, |
| { 0x0018, 0x11000000 }, |
| { 0x0018, 0x10000000 }, |
| { 0x0290, 0x00000001 }, |
| { 0x02a0, 0x80000000 }, |
| { 0x0290, 0x00000004 }, |
| }; |
| |
| static const struct reg_config dbsc_config2[] = { |
| { 0x0290, 0x00000006 }, |
| { 0x02a0, 0x0001c000 }, |
| }; |
| |
| static const struct reg_config dbsc_config3r0d0[] = { |
| { 0x0290, 0x0000000f }, |
| { 0x02a0, 0x00181885 }, |
| { 0x0290, 0x00000070 }, |
| { 0x02a0, 0x7c000887 }, |
| { 0x0290, 0x00000080 }, |
| { 0x02a0, 0x7c000887 }, |
| { 0x0290, 0x00000090 }, |
| { 0x02a0, 0x7c000887 }, |
| { 0x0290, 0x000000a0 }, |
| { 0x02a0, 0x7c000887 }, |
| { 0x0290, 0x000000b0 }, |
| { 0x02a0, 0x7c000880 }, |
| { 0x0290, 0x000000c0 }, |
| { 0x02a0, 0x7c000880 }, |
| { 0x0290, 0x000000d0 }, |
| { 0x02a0, 0x7c000880 }, |
| { 0x0290, 0x000000e0 }, |
| { 0x02a0, 0x7c000880 }, |
| }; |
| |
| static const struct reg_config dbsc_config3r0d1[] = { |
| { 0x0290, 0x0000000f }, |
| { 0x02a0, 0x00181885 }, |
| { 0x0290, 0x00000070 }, |
| { 0x02a0, 0x7c000887 }, |
| { 0x0290, 0x00000080 }, |
| { 0x02a0, 0x7c000887 }, |
| { 0x0290, 0x00000090 }, |
| { 0x02a0, 0x7c000887 }, |
| { 0x0290, 0x000000a0 }, |
| { 0x02a0, 0x7c000887 }, |
| }; |
| |
| static const struct reg_config dbsc_config3r2[] = { |
| { 0x0290, 0x0000000f }, |
| { 0x02a0, 0x00181224 }, |
| }; |
| |
| static const struct reg_config dbsc_config4[] = { |
| { 0x0290, 0x00000010 }, |
| { 0x02a0, 0xf004649b }, |
| { 0x0290, 0x00000061 }, |
| { 0x02a0, 0x0000006d }, |
| { 0x0290, 0x00000001 }, |
| { 0x02a0, 0x00000073 }, |
| { 0x0020, 0x00000007 }, |
| { 0x0024, 0x0f030a02 }, |
| { 0x0030, 0x00000001 }, |
| { 0x00b0, 0x00000000 }, |
| { 0x0040, 0x0000000b }, |
| { 0x0044, 0x00000008 }, |
| { 0x0048, 0x00000000 }, |
| { 0x0050, 0x0000000b }, |
| { 0x0054, 0x000c000b }, |
| { 0x0058, 0x00000027 }, |
| { 0x005c, 0x0000001c }, |
| { 0x0060, 0x00000006 }, |
| { 0x0064, 0x00000020 }, |
| { 0x0068, 0x00000008 }, |
| { 0x006c, 0x0000000c }, |
| { 0x0070, 0x00000009 }, |
| { 0x0074, 0x00000012 }, |
| { 0x0078, 0x000000d0 }, |
| { 0x007c, 0x00140005 }, |
| { 0x0080, 0x00050004 }, |
| { 0x0084, 0x70233005 }, |
| { 0x0088, 0x000c0000 }, |
| { 0x008c, 0x00000200 }, |
| { 0x0090, 0x00000040 }, |
| { 0x0100, 0x00000001 }, |
| { 0x00c0, 0x00020001 }, |
| { 0x00c8, 0x20042004 }, |
| { 0x0380, 0x00020002 }, |
| { 0x0390, 0x0000001f }, |
| }; |
| |
| static const struct reg_config dbsc_config5[] = { |
| { 0x0244, 0x00000011 }, |
| { 0x0290, 0x00000003 }, |
| { 0x02a0, 0x0300c4e1 }, |
| { 0x0290, 0x00000023 }, |
| { 0x02a0, 0x00fcdb60 }, |
| { 0x0290, 0x00000011 }, |
| { 0x02a0, 0x1000040b }, |
| { 0x0290, 0x00000012 }, |
| { 0x02a0, 0x9d9cbb66 }, |
| { 0x0290, 0x00000013 }, |
| { 0x02a0, 0x1a868400 }, |
| { 0x0290, 0x00000014 }, |
| { 0x02a0, 0x300214d8 }, |
| { 0x0290, 0x00000015 }, |
| { 0x02a0, 0x00000d70 }, |
| { 0x0290, 0x00000016 }, |
| { 0x02a0, 0x00000006 }, |
| { 0x0290, 0x00000017 }, |
| { 0x02a0, 0x00000018 }, |
| { 0x0290, 0x0000001a }, |
| { 0x02a0, 0x910035c7 }, |
| { 0x0290, 0x00000004 }, |
| }; |
| |
| static const struct reg_config dbsc_config6[] = { |
| { 0x0290, 0x00000001 }, |
| { 0x02a0, 0x00000181 }, |
| { 0x0018, 0x11000000 }, |
| { 0x0290, 0x00000004 }, |
| }; |
| |
| static const struct reg_config dbsc_config7[] = { |
| { 0x0290, 0x00000001 }, |
| { 0x02a0, 0x0000fe01 }, |
| { 0x0304, 0x00000000 }, |
| { 0x00f4, 0x01004c20 }, |
| { 0x00f8, 0x014000aa }, |
| { 0x00e0, 0x00000140 }, |
| { 0x00e4, 0x00081860 }, |
| { 0x00e8, 0x00010000 }, |
| { 0x0290, 0x00000004 }, |
| }; |
| |
| static const struct reg_config dbsc_config8[] = { |
| { 0x0014, 0x00000001 }, |
| { 0x0010, 0x00000001 }, |
| { 0x0280, 0x00000000 }, |
| }; |
| |
| static const u32 dbsc3_0_base = DBSC3_0_BASE; |
| static const u32 dbsc3_1_base = DBSC3_0_BASE + 0x10000; |
| static const u32 prr_base = 0xff000044; |
| const u16 prr_rev = readl(prr_base) & 0x7fff; |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(dbsc_config1); i++) { |
| writel(dbsc_config1[i].val, dbsc3_0_base | dbsc_config1[i].off); |
| writel(dbsc_config1[i].val, dbsc3_1_base | dbsc_config1[i].off); |
| } |
| |
| dbsc_wait(0x2a0); |
| |
| for (i = 0; i < ARRAY_SIZE(dbsc_config2); i++) { |
| writel(dbsc_config2[i].val, dbsc3_0_base | dbsc_config2[i].off); |
| writel(dbsc_config2[i].val, dbsc3_1_base | dbsc_config2[i].off); |
| } |
| |
| if (prr_rev == 0x4500) { |
| for (i = 0; i < ARRAY_SIZE(dbsc_config3r0d0); i++) { |
| writel(dbsc_config3r0d0[i].val, |
| dbsc3_0_base | dbsc_config3r0d0[i].off); |
| } |
| for (i = 0; i < ARRAY_SIZE(dbsc_config3r0d1); i++) { |
| writel(dbsc_config3r0d1[i].val, |
| dbsc3_1_base | dbsc_config3r0d1[i].off); |
| } |
| } else if (prr_rev != 0x4510) { |
| for (i = 0; i < ARRAY_SIZE(dbsc_config3r2); i++) { |
| writel(dbsc_config3r2[i].val, |
| dbsc3_0_base | dbsc_config3r2[i].off); |
| writel(dbsc_config3r2[i].val, |
| dbsc3_1_base | dbsc_config3r2[i].off); |
| } |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(dbsc_config4); i++) { |
| writel(dbsc_config4[i].val, dbsc3_0_base | dbsc_config4[i].off); |
| writel(dbsc_config4[i].val, dbsc3_1_base | dbsc_config4[i].off); |
| } |
| |
| dbsc_wait(0x240); |
| |
| for (i = 0; i < ARRAY_SIZE(dbsc_config5); i++) { |
| writel(dbsc_config5[i].val, dbsc3_0_base | dbsc_config5[i].off); |
| writel(dbsc_config5[i].val, dbsc3_1_base | dbsc_config5[i].off); |
| } |
| |
| dbsc_wait(0x2a0); |
| |
| for (i = 0; i < ARRAY_SIZE(dbsc_config6); i++) { |
| writel(dbsc_config6[i].val, dbsc3_0_base | dbsc_config6[i].off); |
| writel(dbsc_config6[i].val, dbsc3_1_base | dbsc_config6[i].off); |
| } |
| |
| dbsc_wait(0x2a0); |
| |
| for (i = 0; i < ARRAY_SIZE(dbsc_config7); i++) { |
| writel(dbsc_config7[i].val, dbsc3_0_base | dbsc_config7[i].off); |
| writel(dbsc_config7[i].val, dbsc3_1_base | dbsc_config7[i].off); |
| } |
| |
| dbsc_wait(0x2a0); |
| |
| for (i = 0; i < ARRAY_SIZE(dbsc_config8); i++) { |
| writel(dbsc_config8[i].val, dbsc3_0_base | dbsc_config8[i].off); |
| writel(dbsc_config8[i].val, dbsc3_1_base | dbsc_config8[i].off); |
| } |
| |
| } |
| |
| static void spl_init_qspi(void) |
| { |
| mstp_clrbits_le32(MSTPSR9, SMSTPCR9, QSPI_MSTP917); |
| |
| static const u32 qspi_base = 0xe6b10000; |
| |
| writeb(0x08, qspi_base + 0x00); |
| writeb(0x00, qspi_base + 0x01); |
| writeb(0x06, qspi_base + 0x02); |
| writeb(0x01, qspi_base + 0x0a); |
| writeb(0x00, qspi_base + 0x0b); |
| writeb(0x00, qspi_base + 0x0c); |
| writeb(0x00, qspi_base + 0x0d); |
| writeb(0x00, qspi_base + 0x0e); |
| |
| writew(0xe080, qspi_base + 0x10); |
| |
| writeb(0xc0, qspi_base + 0x18); |
| writeb(0x00, qspi_base + 0x18); |
| writeb(0x00, qspi_base + 0x08); |
| writeb(0x48, qspi_base + 0x00); |
| } |
| |
| void board_init_f(ulong dummy) |
| { |
| mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); |
| mstp_clrbits_le32(MSTPSR2, SMSTPCR2, SCIFA0_MSTP204); |
| |
| /* |
| * SD0 clock is set to 97.5MHz by default. |
| * Set SD2 to the 97.5MHz as well. |
| */ |
| writel(SD_97500KHZ, SD2CKCR); |
| |
| spl_init_sys(); |
| spl_init_pfc(); |
| spl_init_gpio(); |
| spl_init_lbsc(); |
| spl_init_dbsc(); |
| spl_init_qspi(); |
| } |
| |
| void spl_board_init(void) |
| { |
| /* UART clocks enabled and gd valid - init serial console */ |
| preloader_console_init(); |
| } |
| |
| void board_boot_order(u32 *spl_boot_list) |
| { |
| const u32 jtag_magic = 0x1337c0de; |
| const u32 load_magic = 0xb33fc0de; |
| |
| /* |
| * If JTAG probe sets special word at 0xe6300020, then it must |
| * put U-Boot into RAM and SPL will start it from RAM. |
| */ |
| if (readl(CONFIG_SPL_TEXT_BASE + 0x20) == jtag_magic) { |
| printf("JTAG boot detected!\n"); |
| |
| while (readl(CONFIG_SPL_TEXT_BASE + 0x24) != load_magic) |
| ; |
| |
| spl_boot_list[0] = BOOT_DEVICE_RAM; |
| spl_boot_list[1] = BOOT_DEVICE_NONE; |
| |
| return; |
| } |
| |
| /* Boot from SPI NOR with YMODEM UART fallback. */ |
| spl_boot_list[0] = BOOT_DEVICE_SPI; |
| spl_boot_list[1] = BOOT_DEVICE_UART; |
| spl_boot_list[2] = BOOT_DEVICE_NONE; |
| } |
| |
| void reset_cpu(void) |
| { |
| } |