| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2002 |
| * Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Alex Zuepke <azu@sysgo.de> |
| * |
| * Copyright (C) 2011 Andes Technology Corporation |
| * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> |
| * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> |
| */ |
| |
| #include <common.h> |
| #include <irq_func.h> |
| #include <asm/ptrace.h> |
| #include <asm/system.h> |
| #undef INTERRUPT_MODE |
| |
| static int int_flag; |
| |
| int irq_flags; /* needed by asm-nds32/system.h */ |
| |
| int GIE_STATUS(void) |
| { |
| int ret; |
| |
| __asm__ __volatile__ ( |
| "mfsr $p0, $psw\n\t" |
| "andi %0, %0, 0x1\n\t" |
| : "=r" (ret) |
| : |
| : "memory" |
| ); |
| return ret; |
| } |
| |
| #ifdef CONFIG_USE_INTERRUPT |
| |
| int interrupt_init(void) |
| { |
| return 0; |
| } |
| /* enable interrupts */ |
| void enable_interrupts(void) |
| { |
| local_irq_restore(int_flag); |
| } |
| |
| /* |
| * disable interrupts |
| * Return true if GIE is enabled before we disable it. |
| */ |
| int disable_interrupts(void) |
| { |
| |
| int gie_ori_status; |
| |
| gie_ori_status = GIE_STATUS(); |
| |
| local_irq_save(int_flag); |
| |
| return gie_ori_status; |
| } |
| #endif |
| |
| void bad_mode(void) |
| { |
| panic("Resetting CPU ...\n"); |
| reset_cpu(0); |
| } |
| |
| void show_regs(struct pt_regs *regs) |
| { |
| const char *processor_modes[] = {"USER", "SuperUser" , "HyperVisor"}; |
| |
| printf("\n"); |
| printf("pc : [<%08lx>] sp: [<%08lx>]\n" |
| "lp : %08lx gp : %08lx fp : %08lx\n", |
| regs->ipc, regs->sp, regs->lp, regs->gp, regs->fp); |
| printf("D1H: %08lx D1L: %08lx D0H: %08lx D0L: %08lx\n", |
| regs->d1hi, regs->d1lo, regs->d0hi, regs->d0lo); |
| printf("r27: %08lx r26: %08lx r25: %08lx r24: %08lx\n", |
| regs->p1, regs->p0, regs->r[25], regs->r[24]); |
| printf("r23: %08lx r22: %08lx r21: %08lx r20: %08lx\n", |
| regs->r[23], regs->r[22], regs->r[21], regs->r[20]); |
| printf("r19: %08lx r18: %08lx r17: %08lx r16: %08lx\n", |
| regs->r[19], regs->r[18], regs->r[17], regs->r[16]); |
| printf("r15: %08lx r14: %08lx r13: %08lx r12: %08lx\n", |
| regs->r[15], regs->r[14], regs->r[13], regs->r[12]); |
| printf("r11: %08lx r10: %08lx r9 : %08lx r8 : %08lx\n", |
| regs->r[11], regs->r[10], regs->r[9], regs->r[8]); |
| printf("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", |
| regs->r[7], regs->r[6], regs->r[5], regs->r[4]); |
| printf("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n", |
| regs->r[3], regs->r[2], regs->r[1], regs->r[0]); |
| printf(" Interrupts %s Mode %s\n", |
| interrupts_enabled(regs) ? "on" : "off", |
| processor_modes[processor_mode(regs)]); |
| } |
| |
| void do_interruption(struct pt_regs *pt_regs, int EVIC_num) |
| { |
| const char *interruption_type[] = { |
| "Reset", |
| "TLB Fill", |
| "TLB Not Present", |
| "TLB Misc", |
| "VLPT Miss", |
| "Cache Parity Error", |
| "Debug", |
| "General Exception", |
| "External Interrupt" |
| }; |
| |
| printf("%s\n", interruption_type[EVIC_num]); |
| show_regs(pt_regs); |
| bad_mode(); |
| } |