| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2021 ASPEED Technology Inc. |
| */ |
| #include <config.h> |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <asm/types.h> |
| #include <asm/io.h> |
| #include <dm/device.h> |
| #include <dm/fdtaddr.h> |
| #include <linux/delay.h> |
| #include <u-boot/rsa-mod-exp.h> |
| |
| /* ACRY register offsets */ |
| #define ACRY_CTRL1 0x00 |
| #define ACRY_CTRL1_RSA_DMA BIT(1) |
| #define ACRY_CTRL1_RSA_START BIT(0) |
| #define ACRY_CTRL2 0x44 |
| #define ACRY_CTRL3 0x48 |
| #define ACRY_CTRL3_SRAM_AHB_ACCESS BIT(8) |
| #define ACRY_CTRL3_ECC_RSA_MODE_MASK GENMASK(5, 4) |
| #define ACRY_CTRL3_ECC_RSA_MODE_SHIFT 4 |
| #define ACRY_DMA_DRAM_SADDR 0x4c |
| #define ACRY_DMA_DMEM_TADDR 0x50 |
| #define ACRY_DMA_DMEM_TADDR_LEN_MASK GENMASK(15, 0) |
| #define ACRY_DMA_DMEM_TADDR_LEN_SHIFT 0 |
| #define ACRY_RSA_PARAM 0x58 |
| #define ACRY_RSA_PARAM_EXP_MASK GENMASK(31, 16) |
| #define ACRY_RSA_PARAM_EXP_SHIFT 16 |
| #define ACRY_RSA_PARAM_MOD_MASK GENMASK(15, 0) |
| #define ACRY_RSA_PARAM_MOD_SHIFT 0 |
| #define ACRY_RSA_INT_EN 0x3f8 |
| #define ACRY_RSA_INT_EN_RSA_READY BIT(2) |
| #define ACRY_RSA_INT_EN_RSA_CMPLT BIT(1) |
| #define ACRY_RSA_INT_STS 0x3fc |
| #define ACRY_RSA_INT_STS_RSA_READY BIT(2) |
| #define ACRY_RSA_INT_STS_RSA_CMPLT BIT(1) |
| |
| /* misc. constant */ |
| #define ACRY_ECC_MODE 2 |
| #define ACRY_RSA_MODE 3 |
| #define ACRY_CTX_BUFSZ 0x600 |
| |
| struct aspeed_acry { |
| phys_addr_t base; |
| phys_addr_t sram_base; /* internal sram */ |
| struct clk clk; |
| }; |
| |
| static int aspeed_acry_mod_exp(struct udevice *dev, const uint8_t *sig, uint32_t sig_len, |
| struct key_prop *prop, uint8_t *out) |
| { |
| int i, j; |
| u8 *ctx; |
| u8 *ptr; |
| u32 reg; |
| struct aspeed_acry *acry = dev_get_priv(dev); |
| |
| ctx = memalign(16, ACRY_CTX_BUFSZ); |
| if (!ctx) |
| return -ENOMEM; |
| |
| memset(ctx, 0, ACRY_CTX_BUFSZ); |
| |
| ptr = (u8 *)prop->public_exponent; |
| for (i = prop->exp_len - 1, j = 0; i >= 0; --i) { |
| ctx[j] = ptr[i]; |
| j++; |
| j = (j % 16) ? j : j + 32; |
| } |
| |
| ptr = (u8 *)prop->modulus; |
| for (i = (prop->num_bits >> 3) - 1, j = 0; i >= 0; --i) { |
| ctx[j + 16] = ptr[i]; |
| j++; |
| j = (j % 16) ? j : j + 32; |
| } |
| |
| ptr = (u8 *)sig; |
| for (i = sig_len - 1, j = 0; i >= 0; --i) { |
| ctx[j + 32] = ptr[i]; |
| j++; |
| j = (j % 16) ? j : j + 32; |
| } |
| |
| writel((u32)ctx, acry->base + ACRY_DMA_DRAM_SADDR); |
| |
| reg = (((prop->exp_len << 3) << ACRY_RSA_PARAM_EXP_SHIFT) & ACRY_RSA_PARAM_EXP_MASK) | |
| ((prop->num_bits << ACRY_RSA_PARAM_MOD_SHIFT) & ACRY_RSA_PARAM_MOD_MASK); |
| writel(reg, acry->base + ACRY_RSA_PARAM); |
| |
| reg = (ACRY_CTX_BUFSZ << ACRY_DMA_DMEM_TADDR_LEN_SHIFT) & ACRY_DMA_DMEM_TADDR_LEN_MASK; |
| writel(reg, acry->base + ACRY_DMA_DMEM_TADDR); |
| |
| reg = (ACRY_RSA_MODE << ACRY_CTRL3_ECC_RSA_MODE_SHIFT) & ACRY_CTRL3_ECC_RSA_MODE_MASK; |
| writel(reg, acry->base + ACRY_CTRL3); |
| |
| writel(ACRY_CTRL1_RSA_DMA | ACRY_CTRL1_RSA_START, acry->base + ACRY_CTRL1); |
| |
| /* polling RSA status */ |
| while (1) { |
| reg = readl(acry->base + ACRY_RSA_INT_STS); |
| if ((reg & ACRY_RSA_INT_STS_RSA_READY) && (reg & ACRY_RSA_INT_STS_RSA_CMPLT)) { |
| writel(reg, acry->base + ACRY_RSA_INT_STS); |
| break; |
| } |
| udelay(20); |
| } |
| |
| /* grant SRAM access permission to CPU */ |
| writel(0x0, acry->base + ACRY_CTRL1); |
| writel(ACRY_CTRL3_SRAM_AHB_ACCESS, acry->base + ACRY_CTRL3); |
| udelay(20); |
| |
| for (i = (prop->num_bits / 8) - 1, j = 0; i >= 0; --i) { |
| out[i] = readb(acry->sram_base + (j + 32)); |
| j++; |
| j = (j % 16) ? j : j + 32; |
| } |
| |
| /* return SRAM access permission to ACRY */ |
| writel(0, acry->base + ACRY_CTRL3); |
| |
| free(ctx); |
| |
| return 0; |
| } |
| |
| static int aspeed_acry_probe(struct udevice *dev) |
| { |
| struct aspeed_acry *acry = dev_get_priv(dev); |
| int ret; |
| |
| ret = clk_get_by_index(dev, 0, &acry->clk); |
| if (ret < 0) { |
| debug("Can't get clock for %s: %d\n", dev->name, ret); |
| return ret; |
| } |
| |
| ret = clk_enable(&acry->clk); |
| if (ret) { |
| debug("Failed to enable acry clock (%d)\n", ret); |
| return ret; |
| } |
| |
| acry->base = devfdt_get_addr_index(dev, 0); |
| if (acry->base == FDT_ADDR_T_NONE) { |
| debug("Failed to get acry base\n"); |
| return acry->base; |
| } |
| |
| acry->sram_base = devfdt_get_addr_index(dev, 1); |
| if (acry->sram_base == FDT_ADDR_T_NONE) { |
| debug("Failed to get acry SRAM base\n"); |
| return acry->sram_base; |
| } |
| |
| return ret; |
| } |
| |
| static int aspeed_acry_remove(struct udevice *dev) |
| { |
| struct aspeed_acry *acry = dev_get_priv(dev); |
| |
| clk_disable(&acry->clk); |
| |
| return 0; |
| } |
| |
| static const struct mod_exp_ops aspeed_acry_ops = { |
| .mod_exp = aspeed_acry_mod_exp, |
| }; |
| |
| static const struct udevice_id aspeed_acry_ids[] = { |
| { .compatible = "aspeed,ast2600-acry" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(aspeed_acry) = { |
| .name = "aspeed_acry", |
| .id = UCLASS_MOD_EXP, |
| .of_match = aspeed_acry_ids, |
| .probe = aspeed_acry_probe, |
| .remove = aspeed_acry_remove, |
| .priv_auto = sizeof(struct aspeed_acry), |
| .ops = &aspeed_acry_ops, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |