| /* |
| * Copyright (c) 2010-2016, NVIDIA CORPORATION. |
| * (based on tegra_gpio.c) |
| * |
| * SPDX-License-Identifier: GPL-2.0 |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <malloc.h> |
| #include <errno.h> |
| #include <fdtdec.h> |
| #include <asm/io.h> |
| #include <asm/bitops.h> |
| #include <asm/gpio.h> |
| #include <dm/device-internal.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include "tegra186_gpio_priv.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct tegra186_gpio_port_data { |
| const char *name; |
| uint32_t offset; |
| }; |
| |
| struct tegra186_gpio_ctlr_data { |
| const struct tegra186_gpio_port_data *ports; |
| uint32_t port_count; |
| }; |
| |
| struct tegra186_gpio_platdata { |
| const char *name; |
| uint32_t *regs; |
| }; |
| |
| static uint32_t *tegra186_gpio_reg(struct udevice *dev, uint32_t reg, |
| uint32_t gpio) |
| { |
| struct tegra186_gpio_platdata *plat = dev->platdata; |
| uint32_t index = (reg + (gpio * TEGRA186_GPIO_PER_GPIO_STRIDE)) / 4; |
| |
| return &(plat->regs[index]); |
| } |
| |
| static int tegra186_gpio_set_out(struct udevice *dev, unsigned offset, |
| bool output) |
| { |
| uint32_t *reg; |
| uint32_t rval; |
| |
| reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_OUTPUT_CONTROL, offset); |
| rval = readl(reg); |
| if (output) |
| rval &= ~TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED; |
| else |
| rval |= TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED; |
| writel(rval, reg); |
| |
| reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_ENABLE_CONFIG, offset); |
| rval = readl(reg); |
| if (output) |
| rval |= TEGRA186_GPIO_ENABLE_CONFIG_OUT; |
| else |
| rval &= ~TEGRA186_GPIO_ENABLE_CONFIG_OUT; |
| rval |= TEGRA186_GPIO_ENABLE_CONFIG_ENABLE; |
| writel(rval, reg); |
| |
| return 0; |
| } |
| |
| static int tegra186_gpio_set_val(struct udevice *dev, unsigned offset, bool val) |
| { |
| uint32_t *reg; |
| uint32_t rval; |
| |
| reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_OUTPUT_VALUE, offset); |
| rval = readl(reg); |
| if (val) |
| rval |= TEGRA186_GPIO_OUTPUT_VALUE_HIGH; |
| else |
| rval &= ~TEGRA186_GPIO_OUTPUT_VALUE_HIGH; |
| writel(rval, reg); |
| |
| return 0; |
| } |
| |
| static int tegra186_gpio_direction_input(struct udevice *dev, unsigned offset) |
| { |
| return tegra186_gpio_set_out(dev, offset, false); |
| } |
| |
| static int tegra186_gpio_direction_output(struct udevice *dev, unsigned offset, |
| int value) |
| { |
| int ret; |
| |
| ret = tegra186_gpio_set_val(dev, offset, value != 0); |
| if (ret) |
| return ret; |
| return tegra186_gpio_set_out(dev, offset, true); |
| } |
| |
| static int tegra186_gpio_get_value(struct udevice *dev, unsigned offset) |
| { |
| uint32_t *reg; |
| uint32_t rval; |
| |
| reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_ENABLE_CONFIG, offset); |
| rval = readl(reg); |
| |
| if (rval & TEGRA186_GPIO_ENABLE_CONFIG_OUT) |
| reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_OUTPUT_VALUE, |
| offset); |
| else |
| reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_INPUT, offset); |
| |
| rval = readl(reg); |
| return !!rval; |
| } |
| |
| static int tegra186_gpio_set_value(struct udevice *dev, unsigned offset, |
| int value) |
| { |
| return tegra186_gpio_set_val(dev, offset, value != 0); |
| } |
| |
| static int tegra186_gpio_get_function(struct udevice *dev, unsigned offset) |
| { |
| uint32_t *reg; |
| uint32_t rval; |
| |
| reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_ENABLE_CONFIG, offset); |
| rval = readl(reg); |
| if (rval & TEGRA186_GPIO_ENABLE_CONFIG_OUT) |
| return GPIOF_OUTPUT; |
| else |
| return GPIOF_INPUT; |
| } |
| |
| static int tegra186_gpio_xlate(struct udevice *dev, struct gpio_desc *desc, |
| struct fdtdec_phandle_args *args) |
| { |
| int gpio, port, ret; |
| |
| gpio = args->args[0]; |
| port = gpio / TEGRA186_GPIO_PER_GPIO_COUNT; |
| ret = device_get_child(dev, port, &desc->dev); |
| if (ret) |
| return ret; |
| desc->offset = gpio % TEGRA186_GPIO_PER_GPIO_COUNT; |
| desc->flags = args->args[1] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0; |
| |
| return 0; |
| } |
| |
| static const struct dm_gpio_ops tegra186_gpio_ops = { |
| .direction_input = tegra186_gpio_direction_input, |
| .direction_output = tegra186_gpio_direction_output, |
| .get_value = tegra186_gpio_get_value, |
| .set_value = tegra186_gpio_set_value, |
| .get_function = tegra186_gpio_get_function, |
| .xlate = tegra186_gpio_xlate, |
| }; |
| |
| /** |
| * We have a top-level GPIO device with no actual GPIOs. It has a child device |
| * for each port within the controller. |
| */ |
| static int tegra186_gpio_bind(struct udevice *parent) |
| { |
| struct tegra186_gpio_platdata *parent_plat = parent->platdata; |
| struct tegra186_gpio_ctlr_data *ctlr_data = |
| (struct tegra186_gpio_ctlr_data *)dev_get_driver_data(parent); |
| uint32_t *regs; |
| int port, ret; |
| |
| /* If this is a child device, there is nothing to do here */ |
| if (parent_plat) |
| return 0; |
| |
| regs = (uint32_t *)devfdt_get_addr_name(parent, "gpio"); |
| if (regs == (uint32_t *)FDT_ADDR_T_NONE) |
| return -ENODEV; |
| |
| for (port = 0; port < ctlr_data->port_count; port++) { |
| struct tegra186_gpio_platdata *plat; |
| struct udevice *dev; |
| |
| plat = calloc(1, sizeof(*plat)); |
| if (!plat) |
| return -ENOMEM; |
| plat->name = ctlr_data->ports[port].name; |
| plat->regs = &(regs[ctlr_data->ports[port].offset / 4]); |
| |
| ret = device_bind(parent, parent->driver, plat->name, plat, |
| -1, &dev); |
| if (ret) |
| return ret; |
| dev_set_of_offset(dev, dev_of_offset(parent)); |
| } |
| |
| return 0; |
| } |
| |
| static int tegra186_gpio_probe(struct udevice *dev) |
| { |
| struct tegra186_gpio_platdata *plat = dev->platdata; |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| |
| /* Only child devices have ports */ |
| if (!plat) |
| return 0; |
| |
| uc_priv->gpio_count = TEGRA186_GPIO_PER_GPIO_COUNT; |
| uc_priv->bank_name = plat->name; |
| |
| return 0; |
| } |
| |
| static const struct tegra186_gpio_port_data tegra186_gpio_main_ports[] = { |
| {"A", 0x2000}, |
| {"B", 0x3000}, |
| {"C", 0x3200}, |
| {"D", 0x3400}, |
| {"E", 0x2200}, |
| {"F", 0x2400}, |
| {"G", 0x4200}, |
| {"H", 0x1000}, |
| {"I", 0x0800}, |
| {"J", 0x5000}, |
| {"K", 0x5200}, |
| {"L", 0x1200}, |
| {"M", 0x5600}, |
| {"N", 0x0000}, |
| {"O", 0x0200}, |
| {"P", 0x4000}, |
| {"Q", 0x0400}, |
| {"R", 0x0a00}, |
| {"T", 0x0600}, |
| {"X", 0x1400}, |
| {"Y", 0x1600}, |
| {"BB", 0x2600}, |
| {"CC", 0x5400}, |
| }; |
| |
| static const struct tegra186_gpio_ctlr_data tegra186_gpio_main_data = { |
| .ports = tegra186_gpio_main_ports, |
| .port_count = ARRAY_SIZE(tegra186_gpio_main_ports), |
| }; |
| |
| static const struct tegra186_gpio_port_data tegra186_gpio_aon_ports[] = { |
| {"S", 0x0200}, |
| {"U", 0x0400}, |
| {"V", 0x0800}, |
| {"W", 0x0a00}, |
| {"Z", 0x0e00}, |
| {"AA", 0x0c00}, |
| {"EE", 0x0600}, |
| {"FF", 0x0000}, |
| }; |
| |
| static const struct tegra186_gpio_ctlr_data tegra186_gpio_aon_data = { |
| .ports = tegra186_gpio_aon_ports, |
| .port_count = ARRAY_SIZE(tegra186_gpio_aon_ports), |
| }; |
| |
| static const struct udevice_id tegra186_gpio_ids[] = { |
| { |
| .compatible = "nvidia,tegra186-gpio", |
| .data = (ulong)&tegra186_gpio_main_data, |
| }, |
| { |
| .compatible = "nvidia,tegra186-gpio-aon", |
| .data = (ulong)&tegra186_gpio_aon_data, |
| }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(tegra186_gpio) = { |
| .name = "tegra186_gpio", |
| .id = UCLASS_GPIO, |
| .of_match = tegra186_gpio_ids, |
| .bind = tegra186_gpio_bind, |
| .probe = tegra186_gpio_probe, |
| .ops = &tegra186_gpio_ops, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |