| CONFIG_ARM=y |
| CONFIG_ARCH_IMX8=y |
| CONFIG_TEXT_BASE=0x80020000 |
| CONFIG_SYS_MALLOC_LEN=0x2800000 |
| CONFIG_SYS_MALLOC_F_LEN=0x4000 |
| CONFIG_SPL_GPIO=y |
| CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| CONFIG_NR_DRAM_BANKS=3 |
| CONFIG_ENV_SIZE=0x2000 |
| CONFIG_ENV_OFFSET=0x0 |
| CONFIG_DM_GPIO=y |
| CONFIG_DEFAULT_DEVICE_TREE="imx8-deneb" |
| CONFIG_SPL_TEXT_BASE=0x100000 |
| CONFIG_TARGET_DENEB=y |
| CONFIG_SYS_PROMPT="U-Boot# " |
| CONFIG_SPL_MMC=y |
| CONFIG_SPL_SERIAL=y |
| CONFIG_SPL_DRIVERS_MISC=y |
| CONFIG_SPL=y |
| CONFIG_ENV_OFFSET_REDUND=0x2000 |
| CONFIG_IDENT_STRING=" ##v01.06" |
| CONFIG_SPL_LOAD_IMX_CONTAINER=y |
| CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg" |
| CONFIG_SYS_LOAD_ADDR=0x80280000 |
| CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y |
| CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 |
| CONFIG_REMAKE_ELF=y |
| CONFIG_OF_BOARD_SETUP=y |
| CONFIG_OF_SYSTEM_SETUP=y |
| CONFIG_BOOTDELAY=3 |
| CONFIG_AUTOBOOT_KEYED=y |
| CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" |
| CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" |
| CONFIG_AUTOBOOT_KEYED_CTRLC=y |
| CONFIG_USE_BOOTCOMMAND=y |
| CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_self;reset;" |
| CONFIG_LOG=y |
| CONFIG_BOARD_EARLY_INIT_F=y |
| CONFIG_SPL_MAX_SIZE=0x1f000 |
| CONFIG_SPL_HAS_BSS_LINKER_SECTION=y |
| CONFIG_SPL_BSS_START_ADDR=0x128000 |
| CONFIG_SPL_BSS_MAX_SIZE=0x1000 |
| CONFIG_SPL_BOARD_INIT=y |
| CONFIG_SPL_SYS_MALLOC_SIMPLE=y |
| # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set |
| CONFIG_SPL_STACK=0x13e000 |
| CONFIG_SYS_SPL_MALLOC=y |
| CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y |
| CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x120000 |
| CONFIG_SYS_SPL_MALLOC_SIZE=0x3000 |
| CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y |
| CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 |
| CONFIG_SPL_POWER_DOMAIN=y |
| CONFIG_SPL_WATCHDOG=y |
| CONFIG_HUSH_PARSER=y |
| CONFIG_SYS_MAXARGS=64 |
| CONFIG_SYS_CBSIZE=2048 |
| CONFIG_SYS_PBSIZE=2073 |
| CONFIG_CMD_CPU=y |
| # CONFIG_BOOTM_NETBSD is not set |
| CONFIG_SYS_BOOTM_LEN=0x800000 |
| # CONFIG_CMD_EXPORTENV is not set |
| # CONFIG_CMD_IMPORTENV is not set |
| # CONFIG_CMD_CRC32 is not set |
| CONFIG_CMD_CLK=y |
| CONFIG_CMD_DM=y |
| CONFIG_CMD_FUSE=y |
| CONFIG_CMD_GPIO=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_READ=y |
| CONFIG_CMD_DHCP=y |
| CONFIG_CMD_MII=y |
| CONFIG_CMD_PING=y |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_EXT2=y |
| CONFIG_CMD_EXT4=y |
| CONFIG_CMD_FAT=y |
| CONFIG_CMD_FS_GENERIC=y |
| CONFIG_SPL_OF_CONTROL=y |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_ENV_IS_IN_MMC=y |
| CONFIG_SYS_REDUNDAND_ENVIRONMENT=y |
| CONFIG_SYS_MMC_ENV_PART=2 |
| CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y |
| CONFIG_USE_ETHPRIME=y |
| CONFIG_ETHPRIME="eth1" |
| CONFIG_NET_RANDOM_ETHADDR=y |
| CONFIG_SPL_DM=y |
| CONFIG_BOOTCOUNT_LIMIT=y |
| CONFIG_BOOTCOUNT_ENV=y |
| CONFIG_SPL_CLK=y |
| CONFIG_CLK_IMX8=y |
| CONFIG_CPU=y |
| CONFIG_MXC_GPIO=y |
| CONFIG_DM_I2C=y |
| CONFIG_SYS_I2C_IMX_LPI2C=y |
| CONFIG_LED=y |
| CONFIG_LED_GPIO=y |
| CONFIG_MISC=y |
| CONFIG_SUPPORT_EMMC_BOOT=y |
| CONFIG_MMC_IO_VOLTAGE=y |
| CONFIG_MMC_UHS_SUPPORT=y |
| CONFIG_MMC_HS400_SUPPORT=y |
| CONFIG_FSL_USDHC=y |
| CONFIG_PHYLIB=y |
| CONFIG_MV88E61XX_SWITCH=y |
| CONFIG_MV88E61XX_CPU_PORT=5 |
| CONFIG_MV88E61XX_PHY_PORTS=0x7 |
| CONFIG_MV88E61XX_FIXED_PORTS=0x0 |
| CONFIG_FEC_MXC_SHARE_MDIO=y |
| CONFIG_FEC_MXC_MDIO_BASE=0x5B050000 |
| CONFIG_FEC_MXC=y |
| CONFIG_MII=y |
| CONFIG_PINCTRL=y |
| CONFIG_SPL_PINCTRL=y |
| CONFIG_PINCTRL_IMX8=y |
| CONFIG_POWER_DOMAIN=y |
| CONFIG_IMX8_POWER_DOMAIN=y |
| CONFIG_DM_REGULATOR=y |
| CONFIG_DM_REGULATOR_FIXED=y |
| CONFIG_DM_REGULATOR_GPIO=y |
| CONFIG_SPL_DM_REGULATOR_GPIO=y |
| CONFIG_DM_SERIAL=y |
| CONFIG_FSL_LPUART=y |
| CONFIG_DM_THERMAL=y |
| CONFIG_IMX_SCU_THERMAL=y |
| # CONFIG_SPL_WDT is not set |
| CONFIG_SPL_TINY_MEMSET=y |
| # CONFIG_EFI_LOADER is not set |