blob: a02a198dfbee32884a86abb672dd0c581e066134 [file] [log] [blame]
Generic USB Properties
Optional properties:
- maximum-speed: tells USB controllers we want to work up to a certain
speed. Valid arguments are "super-speed-plus",
"super-speed", "high-speed", "full-speed" and
"low-speed". In case this isn't passed via DT, USB
controllers should default to their maximum HW
capability.
- dr_mode: tells Dual-Role USB controllers that we want to work on a
particular mode. Valid arguments are "host",
"peripheral" and "otg". In case this attribute isn't
passed via DT, USB DRD controllers should default to
OTG.
- phy_type: tells USB controllers that we want to configure the core to support
a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is
selected. Valid arguments are "utmi" and "utmi_wide".
In case this isn't passed via DT, USB controllers should
default to HW capability.
This is an attribute to a USB controller such as:
dwc3@4a030000 {
compatible = "synopsys,dwc3";
reg = <0x4a030000 0xcfff>;
interrupts = <0 92 4>
usb-phy = <&usb2_phy>, <&usb3,phy>;
maximum-speed = "super-speed";
dr_mode = "otg";
phy_type = "utmi_wide";
};