| /* |
| * (C) Copyright 2003 - 2009 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * Derived from the MPC8xx driver's header file. |
| */ |
| |
| #ifndef __MPC512X_FEC_H |
| #define __MPC512X_FEC_H |
| |
| #include <common.h> |
| #include <mpc512x.h> |
| |
| typedef unsigned long uint32; |
| typedef unsigned short uint16; |
| typedef unsigned char uint8; |
| |
| /* Receive & Transmit Buffer Descriptor definitions */ |
| typedef struct BufferDescriptor { |
| uint16 status; |
| uint16 dataLength; |
| uint32 dataPointer; |
| } FEC_RBD; |
| |
| typedef struct { |
| uint16 status; |
| uint16 dataLength; |
| uint32 dataPointer; |
| } FEC_TBD; |
| |
| /* private structure */ |
| typedef enum { |
| SEVENWIRE, /* 7-wire */ |
| MII10, /* MII 10Mbps */ |
| MII100 /* MII 100Mbps */ |
| } xceiver_type; |
| |
| /* BD Numer definitions */ |
| #define FEC_TBD_NUM 48 /* The user can adjust this value */ |
| #define FEC_RBD_NUM 32 /* The user can adjust this value */ |
| |
| /* packet size limit */ |
| #define FEC_MAX_FRAME_LEN 1522 /* recommended default value */ |
| |
| /* Buffer size must be evenly divisible by 16 */ |
| #define FEC_BUFFER_SIZE ((FEC_MAX_FRAME_LEN + 0x10) & (~0xf)) |
| |
| typedef struct { |
| uint8 frame[FEC_BUFFER_SIZE]; |
| } mpc512x_frame; |
| |
| typedef struct { |
| FEC_RBD rbd[FEC_RBD_NUM]; /* RBD ring */ |
| FEC_TBD tbd[FEC_TBD_NUM]; /* TBD ring */ |
| mpc512x_frame recv_frames[FEC_RBD_NUM]; /* receive buff */ |
| } mpc512x_buff_descs; |
| |
| typedef struct { |
| volatile fec512x_t *eth; |
| xceiver_type xcv_type; /* transceiver type */ |
| mpc512x_buff_descs *bdBase; /* BD rings and recv buffer */ |
| uint16 rbdIndex; /* next receive BD to read */ |
| uint16 tbdIndex; /* next transmit BD to send */ |
| uint16 usedTbdIndex; /* next transmit BD to clean */ |
| uint16 cleanTbdNum; /* the number of available transmit BDs */ |
| } mpc512x_fec_priv; |
| |
| /* RBD bits definitions */ |
| #define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */ |
| #define FEC_RBD_WRAP 0x2000 /* Last BD in ring */ |
| #define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */ |
| #define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */ |
| #define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */ |
| #define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */ |
| #define FEC_RBD_LG 0x0020 /* Frame length violation */ |
| #define FEC_RBD_NO 0x0010 /* Nonoctet align frame */ |
| #define FEC_RBD_SH 0x0008 /* Short frame */ |
| #define FEC_RBD_CR 0x0004 /* CRC error */ |
| #define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */ |
| #define FEC_RBD_TR 0x0001 /* Frame is truncated */ |
| #define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \ |
| FEC_RBD_OV | FEC_RBD_TR) |
| |
| /* TBD bits definitions */ |
| #define FEC_TBD_READY 0x8000 /* Buffer is ready */ |
| #define FEC_TBD_WRAP 0x2000 /* Last BD in ring */ |
| #define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */ |
| #define FEC_TBD_TC 0x0400 /* Transmit the CRC */ |
| #define FEC_TBD_ABC 0x0200 /* Append bad CRC */ |
| |
| /* MII-related definitios */ |
| #define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */ |
| #define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */ |
| #define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */ |
| #define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */ |
| #define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */ |
| #define FEC_MII_DATA_TA 0x00020000 /* Turnaround */ |
| #define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */ |
| |
| #define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */ |
| #define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */ |
| |
| #endif /* __MPC512X_FEC_H */ |