| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * pinmux setup for siemens pxm2 board |
| * |
| * (C) Copyright 2013 Siemens Schweiz AG |
| * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. |
| * |
| * Based on: |
| * u-boot:/board/ti/am335x/mux.c |
| * |
| * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ |
| */ |
| |
| #include <common.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/mux.h> |
| #include <asm/io.h> |
| #include <i2c.h> |
| #include "board.h" |
| |
| static struct module_pin_mux uart0_pin_mux[] = { |
| {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ |
| {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ |
| {OFFSET(nnmi), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_TXD */ |
| {-1}, |
| }; |
| |
| #ifdef CONFIG_MTD_RAW_NAND |
| static struct module_pin_mux nand_pin_mux[] = { |
| {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ |
| {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ |
| {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ |
| {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ |
| {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ |
| {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ |
| {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ |
| {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ |
| {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ |
| {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ |
| {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ |
| {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ |
| {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ |
| {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ |
| {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ |
| {OFFSET(gpmc_a11), MODE(7) | RXACTIVE | PULLUP_EN}, /* RGMII2_RD0 */ |
| {OFFSET(mcasp0_ahclkx), MODE(7) | PULLUDEN}, /* MCASP0_AHCLKX */ |
| {-1}, |
| }; |
| #endif |
| |
| static struct module_pin_mux i2c0_pin_mux[] = { |
| {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, |
| {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, |
| {-1}, |
| }; |
| |
| static struct module_pin_mux i2c1_pin_mux[] = { |
| {OFFSET(spi0_d1), (MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL)}, |
| {OFFSET(spi0_cs0), (MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL)}, |
| {-1}, |
| }; |
| |
| #ifndef CONFIG_NO_ETH |
| static struct module_pin_mux rgmii1_pin_mux[] = { |
| {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */ |
| {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */ |
| {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */ |
| {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */ |
| {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */ |
| {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */ |
| {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */ |
| {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */ |
| {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */ |
| {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */ |
| {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */ |
| {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */ |
| {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ |
| {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ |
| {-1}, |
| }; |
| |
| static struct module_pin_mux rgmii2_pin_mux[] = { |
| {OFFSET(gpmc_a0), MODE(2)}, /* RGMII2_TCTL */ |
| {OFFSET(gpmc_a1), MODE(2) | RXACTIVE}, /* RGMII2_RCTL */ |
| {OFFSET(gpmc_a2), MODE(2)}, /* RGMII2_TD3 */ |
| {OFFSET(gpmc_a3), MODE(2)}, /* RGMII2_TD2 */ |
| {OFFSET(gpmc_a4), MODE(2)}, /* RGMII2_TD1 */ |
| {OFFSET(gpmc_a5), MODE(2)}, /* RGMII2_TD0 */ |
| {OFFSET(gpmc_a6), MODE(7)}, /* RGMII2_TCLK */ |
| {OFFSET(gpmc_a7), MODE(2) | RXACTIVE}, /* RGMII2_RCLK */ |
| {OFFSET(gpmc_a8), MODE(2) | RXACTIVE}, /* RGMII2_RD3 */ |
| {OFFSET(gpmc_a9), MODE(7)}, /* RGMII2_RD2 */ |
| {OFFSET(gpmc_a10), MODE(2) | RXACTIVE}, /* RGMII2_RD1 */ |
| {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ |
| {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ |
| {-1}, |
| }; |
| #endif |
| |
| #ifdef CONFIG_MMC |
| static struct module_pin_mux mmc0_pin_mux[] = { |
| {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ |
| {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ |
| {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ |
| {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ |
| {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ |
| {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ |
| {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ |
| {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUDEN)}, /* MMC0_CD */ |
| {-1}, |
| }; |
| #endif |
| |
| static struct module_pin_mux lcdc_pin_mux[] = { |
| {OFFSET(lcd_data0), (MODE(0) | PULLUDDIS)}, /* LCD_DAT0 */ |
| {OFFSET(lcd_data1), (MODE(0) | PULLUDDIS)}, /* LCD_DAT1 */ |
| {OFFSET(lcd_data2), (MODE(0) | PULLUDDIS)}, /* LCD_DAT2 */ |
| {OFFSET(lcd_data3), (MODE(0) | PULLUDDIS)}, /* LCD_DAT3 */ |
| {OFFSET(lcd_data4), (MODE(0) | PULLUDDIS)}, /* LCD_DAT4 */ |
| {OFFSET(lcd_data5), (MODE(0) | PULLUDDIS)}, /* LCD_DAT5 */ |
| {OFFSET(lcd_data6), (MODE(0) | PULLUDDIS)}, /* LCD_DAT6 */ |
| {OFFSET(lcd_data7), (MODE(0) | PULLUDDIS)}, /* LCD_DAT7 */ |
| {OFFSET(lcd_data8), (MODE(0) | PULLUDDIS)}, /* LCD_DAT8 */ |
| {OFFSET(lcd_data9), (MODE(0) | PULLUDDIS)}, /* LCD_DAT9 */ |
| {OFFSET(lcd_data10), (MODE(0) | PULLUDDIS)}, /* LCD_DAT10 */ |
| {OFFSET(lcd_data11), (MODE(0) | PULLUDDIS)}, /* LCD_DAT11 */ |
| {OFFSET(lcd_data12), (MODE(0) | PULLUDDIS)}, /* LCD_DAT12 */ |
| {OFFSET(lcd_data13), (MODE(0) | PULLUDDIS)}, /* LCD_DAT13 */ |
| {OFFSET(lcd_data14), (MODE(0) | PULLUDDIS)}, /* LCD_DAT14 */ |
| {OFFSET(lcd_data15), (MODE(0) | PULLUDDIS)}, /* LCD_DAT15 */ |
| {OFFSET(gpmc_ad8), (MODE(1))}, /* LCD_DAT16 */ |
| {OFFSET(gpmc_ad9), (MODE(1))}, /* LCD_DAT17 */ |
| {OFFSET(gpmc_ad10), (MODE(1))}, /* LCD_DAT18 */ |
| {OFFSET(gpmc_ad11), (MODE(1))}, /* LCD_DAT19 */ |
| {OFFSET(gpmc_ad12), (MODE(1))}, /* LCD_DAT20 */ |
| {OFFSET(gpmc_ad13), (MODE(1))}, /* LCD_DAT21 */ |
| {OFFSET(gpmc_ad14), (MODE(1))}, /* LCD_DAT22 */ |
| {OFFSET(gpmc_ad15), (MODE(1))}, /* LCD_DAT23 */ |
| {OFFSET(lcd_vsync), (MODE(0))}, /* LCD_VSYNC */ |
| {OFFSET(lcd_hsync), (MODE(0))}, /* LCD_HSYNC */ |
| {OFFSET(lcd_pclk), (MODE(0))}, /* LCD_PCLK */ |
| {OFFSET(lcd_ac_bias_en), (MODE(0))}, /* LCD_AC_BIAS_EN */ |
| {-1}, |
| }; |
| |
| static struct module_pin_mux ecap0_pin_mux[] = { |
| {OFFSET(ecap0_in_pwm0_out), (MODE(0))}, |
| {-1}, |
| }; |
| |
| static struct module_pin_mux gpio_pin_mux[] = { |
| {OFFSET(mcasp0_fsx), MODE(7)}, /* GPIO3_15 LCD power*/ |
| {OFFSET(mcasp0_axr0), MODE(7)}, /* GPIO3_16 Backlight */ |
| {OFFSET(gpmc_a9), MODE(7)}, /* GPIO1_25 Touch power */ |
| {-1}, |
| }; |
| void enable_i2c0_pin_mux(void) |
| { |
| configure_module_pin_mux(i2c0_pin_mux); |
| } |
| |
| void enable_uart0_pin_mux(void) |
| { |
| configure_module_pin_mux(uart0_pin_mux); |
| } |
| |
| void enable_board_pin_mux(void) |
| { |
| configure_module_pin_mux(uart0_pin_mux); |
| configure_module_pin_mux(i2c1_pin_mux); |
| #ifdef CONFIG_MTD_RAW_NAND |
| configure_module_pin_mux(nand_pin_mux); |
| #endif |
| #ifndef CONFIG_NO_ETH |
| configure_module_pin_mux(rgmii1_pin_mux); |
| configure_module_pin_mux(rgmii2_pin_mux); |
| #endif |
| #ifdef CONFIG_MMC |
| configure_module_pin_mux(mmc0_pin_mux); |
| #endif |
| configure_module_pin_mux(lcdc_pin_mux); |
| configure_module_pin_mux(gpio_pin_mux); |
| configure_module_pin_mux(ecap0_pin_mux); |
| } |