| // SPDX-License-Identifier: eCos-2.0 |
| /* |
| *========================================================================== |
| * |
| * xyzModem.c |
| * |
| * RedBoot stream handler for xyzModem protocol |
| * |
| *========================================================================== |
| *#####DESCRIPTIONBEGIN#### |
| * |
| * Author(s): gthomas |
| * Contributors: gthomas, tsmith, Yoshinori Sato |
| * Date: 2000-07-14 |
| * Purpose: |
| * Description: |
| * |
| * This code is part of RedBoot (tm). |
| * |
| *####DESCRIPTIONEND#### |
| * |
| *========================================================================== |
| */ |
| #include <common.h> |
| #include <xyzModem.h> |
| #include <stdarg.h> |
| #include <u-boot/crc.h> |
| |
| /* Assumption - run xyzModem protocol over the console port */ |
| |
| /* Values magic to the protocol */ |
| #define SOH 0x01 |
| #define STX 0x02 |
| #define EOT 0x04 |
| #define ACK 0x06 |
| #define BSP 0x08 |
| #define NAK 0x15 |
| #define CAN 0x18 |
| #define EOF 0x1A /* ^Z for DOS officionados */ |
| |
| /* Data & state local to the protocol */ |
| static struct |
| { |
| int *__chan; |
| unsigned char pkt[1024], *bufp; |
| unsigned char blk, cblk, crc1, crc2; |
| unsigned char next_blk; /* Expected block */ |
| int len, mode, total_retries; |
| int total_SOH, total_STX, total_CAN; |
| bool crc_mode, at_eof, tx_ack; |
| unsigned long file_length, read_length; |
| } xyz; |
| |
| #define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */ |
| #define xyzModem_MAX_RETRIES 20 |
| #define xyzModem_MAX_RETRIES_WITH_CRC 10 |
| #define xyzModem_CAN_COUNT 3 /* Wait for 3 CAN before quitting */ |
| |
| |
| typedef int cyg_int32; |
| static int |
| CYGACC_COMM_IF_GETC_TIMEOUT (char chan, char *c) |
| { |
| |
| ulong now = get_timer(0); |
| while (!tstc ()) |
| { |
| if (get_timer(now) > xyzModem_CHAR_TIMEOUT) |
| break; |
| } |
| if (tstc ()) |
| { |
| *c = getc (); |
| return 1; |
| } |
| return 0; |
| } |
| |
| static void |
| CYGACC_COMM_IF_PUTC (char x, char y) |
| { |
| putc (y); |
| } |
| |
| /* Validate a hex character */ |
| __inline__ static bool |
| _is_hex (char c) |
| { |
| return (((c >= '0') && (c <= '9')) || |
| ((c >= 'A') && (c <= 'F')) || ((c >= 'a') && (c <= 'f'))); |
| } |
| |
| /* Convert a single hex nibble */ |
| __inline__ static int |
| _from_hex (char c) |
| { |
| int ret = 0; |
| |
| if ((c >= '0') && (c <= '9')) |
| { |
| ret = (c - '0'); |
| } |
| else if ((c >= 'a') && (c <= 'f')) |
| { |
| ret = (c - 'a' + 0x0a); |
| } |
| else if ((c >= 'A') && (c <= 'F')) |
| { |
| ret = (c - 'A' + 0x0A); |
| } |
| return ret; |
| } |
| |
| /* Convert a character to lower case */ |
| __inline__ static char |
| _tolower (char c) |
| { |
| if ((c >= 'A') && (c <= 'Z')) |
| { |
| c = (c - 'A') + 'a'; |
| } |
| return c; |
| } |
| |
| /* Parse (scan) a number */ |
| static bool |
| parse_num (char *s, unsigned long *val, char **es, char *delim) |
| { |
| bool first = true; |
| int radix = 10; |
| char c; |
| unsigned long result = 0; |
| int digit; |
| |
| while (*s == ' ') |
| s++; |
| while (*s) |
| { |
| if (first && (s[0] == '0') && (_tolower (s[1]) == 'x')) |
| { |
| radix = 16; |
| s += 2; |
| } |
| first = false; |
| c = *s++; |
| if (_is_hex (c) && ((digit = _from_hex (c)) < radix)) |
| { |
| /* Valid digit */ |
| result = (result * radix) + digit; |
| } |
| else |
| { |
| if (delim != (char *) 0) |
| { |
| /* See if this character is one of the delimiters */ |
| char *dp = delim; |
| while (*dp && (c != *dp)) |
| dp++; |
| if (*dp) |
| break; /* Found a good delimiter */ |
| } |
| return false; /* Malformatted number */ |
| } |
| } |
| *val = result; |
| if (es != (char **) 0) |
| { |
| *es = s; |
| } |
| return true; |
| } |
| |
| |
| #if defined(DEBUG) && !defined(CONFIG_USE_TINY_PRINTF) |
| /* |
| * Note: this debug setup works by storing the strings in a fixed buffer |
| */ |
| static char zm_debug_buf[8192]; |
| static char *zm_out = zm_debug_buf; |
| static char *zm_out_start = zm_debug_buf; |
| |
| static int |
| zm_dprintf(char *fmt, ...) |
| { |
| int len; |
| va_list args; |
| |
| va_start(args, fmt); |
| len = diag_vsprintf(zm_out, fmt, args); |
| va_end(args); |
| zm_out += len; |
| return len; |
| } |
| |
| static void |
| zm_flush (void) |
| { |
| zm_out = zm_out_start; |
| } |
| |
| static void |
| zm_dump_buf (void *buf, int len) |
| { |
| |
| } |
| |
| static unsigned char zm_buf[2048]; |
| static unsigned char *zm_bp; |
| |
| static void |
| zm_new (void) |
| { |
| zm_bp = zm_buf; |
| } |
| |
| static void |
| zm_save (unsigned char c) |
| { |
| *zm_bp++ = c; |
| } |
| |
| static void |
| zm_dump (int line) |
| { |
| zm_dprintf ("Packet at line: %d\n", line); |
| zm_dump_buf (zm_buf, zm_bp - zm_buf); |
| } |
| |
| #define ZM_DEBUG(x) x |
| #else |
| #define ZM_DEBUG(x) |
| #endif |
| |
| /* Wait for the line to go idle */ |
| static void |
| xyzModem_flush (void) |
| { |
| int res; |
| char c; |
| while (true) |
| { |
| res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c); |
| if (!res) |
| return; |
| } |
| } |
| |
| static int |
| xyzModem_get_hdr (void) |
| { |
| char c; |
| int res; |
| bool hdr_found = false; |
| int i, can_total, hdr_chars; |
| unsigned short cksum; |
| |
| ZM_DEBUG (zm_new ()); |
| /* Find the start of a header */ |
| can_total = 0; |
| hdr_chars = 0; |
| |
| if (xyz.tx_ack) |
| { |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK); |
| xyz.tx_ack = false; |
| } |
| while (!hdr_found) |
| { |
| res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c); |
| ZM_DEBUG (zm_save (c)); |
| if (res) |
| { |
| hdr_chars++; |
| switch (c) |
| { |
| case SOH: |
| xyz.total_SOH++; |
| case STX: |
| if (c == STX) |
| xyz.total_STX++; |
| hdr_found = true; |
| break; |
| case CAN: |
| xyz.total_CAN++; |
| ZM_DEBUG (zm_dump (__LINE__)); |
| if (++can_total == xyzModem_CAN_COUNT) |
| { |
| return xyzModem_cancel; |
| } |
| else |
| { |
| /* Wait for multiple CAN to avoid early quits */ |
| break; |
| } |
| case EOT: |
| /* EOT only supported if no noise */ |
| if (hdr_chars == 1) |
| { |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK); |
| ZM_DEBUG (zm_dprintf ("ACK on EOT #%d\n", __LINE__)); |
| ZM_DEBUG (zm_dump (__LINE__)); |
| return xyzModem_eof; |
| } |
| default: |
| /* Ignore, waiting for start of header */ |
| ; |
| } |
| } |
| else |
| { |
| /* Data stream timed out */ |
| xyzModem_flush (); /* Toss any current input */ |
| ZM_DEBUG (zm_dump (__LINE__)); |
| CYGACC_CALL_IF_DELAY_US ((cyg_int32) 250000); |
| return xyzModem_timeout; |
| } |
| } |
| |
| /* Header found, now read the data */ |
| res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.blk); |
| ZM_DEBUG (zm_save (xyz.blk)); |
| if (!res) |
| { |
| ZM_DEBUG (zm_dump (__LINE__)); |
| return xyzModem_timeout; |
| } |
| res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.cblk); |
| ZM_DEBUG (zm_save (xyz.cblk)); |
| if (!res) |
| { |
| ZM_DEBUG (zm_dump (__LINE__)); |
| return xyzModem_timeout; |
| } |
| xyz.len = (c == SOH) ? 128 : 1024; |
| xyz.bufp = xyz.pkt; |
| for (i = 0; i < xyz.len; i++) |
| { |
| res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c); |
| ZM_DEBUG (zm_save (c)); |
| if (res) |
| { |
| xyz.pkt[i] = c; |
| } |
| else |
| { |
| ZM_DEBUG (zm_dump (__LINE__)); |
| return xyzModem_timeout; |
| } |
| } |
| res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.crc1); |
| ZM_DEBUG (zm_save (xyz.crc1)); |
| if (!res) |
| { |
| ZM_DEBUG (zm_dump (__LINE__)); |
| return xyzModem_timeout; |
| } |
| if (xyz.crc_mode) |
| { |
| res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.crc2); |
| ZM_DEBUG (zm_save (xyz.crc2)); |
| if (!res) |
| { |
| ZM_DEBUG (zm_dump (__LINE__)); |
| return xyzModem_timeout; |
| } |
| } |
| ZM_DEBUG (zm_dump (__LINE__)); |
| /* Validate the message */ |
| if ((xyz.blk ^ xyz.cblk) != (unsigned char) 0xFF) |
| { |
| ZM_DEBUG (zm_dprintf |
| ("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk, |
| (xyz.blk ^ xyz.cblk))); |
| ZM_DEBUG (zm_dump_buf (xyz.pkt, xyz.len)); |
| xyzModem_flush (); |
| return xyzModem_frame; |
| } |
| /* Verify checksum/CRC */ |
| if (xyz.crc_mode) |
| { |
| cksum = crc16_ccitt(0, xyz.pkt, xyz.len); |
| if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) |
| { |
| ZM_DEBUG (zm_dprintf ("CRC error - recvd: %02x%02x, computed: %x\n", |
| xyz.crc1, xyz.crc2, cksum & 0xFFFF)); |
| return xyzModem_cksum; |
| } |
| } |
| else |
| { |
| cksum = 0; |
| for (i = 0; i < xyz.len; i++) |
| { |
| cksum += xyz.pkt[i]; |
| } |
| if (xyz.crc1 != (cksum & 0xFF)) |
| { |
| ZM_DEBUG (zm_dprintf |
| ("Checksum error - recvd: %x, computed: %x\n", xyz.crc1, |
| cksum & 0xFF)); |
| return xyzModem_cksum; |
| } |
| } |
| /* If we get here, the message passes [structural] muster */ |
| return 0; |
| } |
| |
| int |
| xyzModem_stream_open (connection_info_t * info, int *err) |
| { |
| int stat = 0; |
| int retries = xyzModem_MAX_RETRIES; |
| int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC; |
| |
| /* ZM_DEBUG(zm_out = zm_out_start); */ |
| #ifdef xyzModem_zmodem |
| if (info->mode == xyzModem_zmodem) |
| { |
| *err = xyzModem_noZmodem; |
| return -1; |
| } |
| #endif |
| |
| /* TODO: CHECK ! */ |
| int dummy = 0; |
| xyz.__chan = &dummy; |
| xyz.len = 0; |
| xyz.crc_mode = true; |
| xyz.at_eof = false; |
| xyz.tx_ack = false; |
| xyz.mode = info->mode; |
| xyz.total_retries = 0; |
| xyz.total_SOH = 0; |
| xyz.total_STX = 0; |
| xyz.total_CAN = 0; |
| xyz.read_length = 0; |
| xyz.file_length = 0; |
| |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); |
| |
| if (xyz.mode == xyzModem_xmodem) |
| { |
| /* X-modem doesn't have an information header - exit here */ |
| xyz.next_blk = 1; |
| return 0; |
| } |
| |
| while (retries-- > 0) |
| { |
| stat = xyzModem_get_hdr (); |
| if (stat == 0) |
| { |
| /* Y-modem file information header */ |
| if (xyz.blk == 0) |
| { |
| /* skip filename */ |
| while (*xyz.bufp++); |
| /* get the length */ |
| parse_num ((char *) xyz.bufp, &xyz.file_length, NULL, " "); |
| /* The rest of the file name data block quietly discarded */ |
| xyz.tx_ack = true; |
| } |
| xyz.next_blk = 1; |
| xyz.len = 0; |
| return 0; |
| } |
| else if (stat == xyzModem_timeout) |
| { |
| if (--crc_retries <= 0) |
| xyz.crc_mode = false; |
| CYGACC_CALL_IF_DELAY_US (5 * 100000); /* Extra delay for startup */ |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); |
| xyz.total_retries++; |
| ZM_DEBUG (zm_dprintf ("NAK (%d)\n", __LINE__)); |
| } |
| if (stat == xyzModem_cancel) |
| { |
| break; |
| } |
| } |
| *err = stat; |
| ZM_DEBUG (zm_flush ()); |
| return -1; |
| } |
| |
| int |
| xyzModem_stream_read (char *buf, int size, int *err) |
| { |
| int stat, total, len; |
| int retries; |
| |
| total = 0; |
| stat = xyzModem_cancel; |
| /* Try and get 'size' bytes into the buffer */ |
| while (!xyz.at_eof && (size > 0)) |
| { |
| if (xyz.len == 0) |
| { |
| retries = xyzModem_MAX_RETRIES; |
| while (retries-- > 0) |
| { |
| stat = xyzModem_get_hdr (); |
| if (stat == 0) |
| { |
| if (xyz.blk == xyz.next_blk) |
| { |
| xyz.tx_ack = true; |
| ZM_DEBUG (zm_dprintf |
| ("ACK block %d (%d)\n", xyz.blk, __LINE__)); |
| xyz.next_blk = (xyz.next_blk + 1) & 0xFF; |
| |
| if (xyz.mode == xyzModem_xmodem || xyz.file_length == 0) |
| { |
| /* Data blocks can be padded with ^Z (EOF) characters */ |
| /* This code tries to detect and remove them */ |
| if ((xyz.bufp[xyz.len - 1] == EOF) && |
| (xyz.bufp[xyz.len - 2] == EOF) && |
| (xyz.bufp[xyz.len - 3] == EOF)) |
| { |
| while (xyz.len |
| && (xyz.bufp[xyz.len - 1] == EOF)) |
| { |
| xyz.len--; |
| } |
| } |
| } |
| |
| /* |
| * See if accumulated length exceeds that of the file. |
| * If so, reduce size (i.e., cut out pad bytes) |
| * Only do this for Y-modem (and Z-modem should it ever |
| * be supported since it can fall back to Y-modem mode). |
| */ |
| if (xyz.mode != xyzModem_xmodem && 0 != xyz.file_length) |
| { |
| xyz.read_length += xyz.len; |
| if (xyz.read_length > xyz.file_length) |
| { |
| xyz.len -= (xyz.read_length - xyz.file_length); |
| } |
| } |
| break; |
| } |
| else if (xyz.blk == ((xyz.next_blk - 1) & 0xFF)) |
| { |
| /* Just re-ACK this so sender will get on with it */ |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK); |
| continue; /* Need new header */ |
| } |
| else |
| { |
| stat = xyzModem_sequence; |
| } |
| } |
| if (stat == xyzModem_cancel) |
| { |
| break; |
| } |
| if (stat == xyzModem_eof) |
| { |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK); |
| ZM_DEBUG (zm_dprintf ("ACK (%d)\n", __LINE__)); |
| if (xyz.mode == xyzModem_ymodem) |
| { |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, |
| (xyz.crc_mode ? 'C' : NAK)); |
| xyz.total_retries++; |
| ZM_DEBUG (zm_dprintf ("Reading Final Header\n")); |
| stat = xyzModem_get_hdr (); |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK); |
| ZM_DEBUG (zm_dprintf ("FINAL ACK (%d)\n", __LINE__)); |
| } |
| xyz.at_eof = true; |
| break; |
| } |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); |
| xyz.total_retries++; |
| ZM_DEBUG (zm_dprintf ("NAK (%d)\n", __LINE__)); |
| } |
| if (stat < 0) |
| { |
| *err = stat; |
| xyz.len = -1; |
| return total; |
| } |
| } |
| /* Don't "read" data from the EOF protocol package */ |
| if (!xyz.at_eof) |
| { |
| len = xyz.len; |
| if (size < len) |
| len = size; |
| memcpy (buf, xyz.bufp, len); |
| size -= len; |
| buf += len; |
| total += len; |
| xyz.len -= len; |
| xyz.bufp += len; |
| } |
| } |
| return total; |
| } |
| |
| void |
| xyzModem_stream_close (int *err) |
| { |
| diag_printf |
| ("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n", |
| xyz.crc_mode ? "CRC" : "Cksum", xyz.total_SOH, xyz.total_STX, |
| xyz.total_CAN, xyz.total_retries); |
| ZM_DEBUG (zm_flush ()); |
| } |
| |
| /* Need to be able to clean out the input buffer, so have to take the */ |
| /* getc */ |
| void |
| xyzModem_stream_terminate (bool abort, int (*getc) (void)) |
| { |
| int c; |
| |
| if (abort) |
| { |
| ZM_DEBUG (zm_dprintf ("!!!! TRANSFER ABORT !!!!\n")); |
| switch (xyz.mode) |
| { |
| case xyzModem_xmodem: |
| case xyzModem_ymodem: |
| /* The X/YMODEM Spec seems to suggest that multiple CAN followed by an equal */ |
| /* number of Backspaces is a friendly way to get the other end to abort. */ |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN); |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN); |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN); |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN); |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP); |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP); |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP); |
| CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP); |
| /* Now consume the rest of what's waiting on the line. */ |
| ZM_DEBUG (zm_dprintf ("Flushing serial line.\n")); |
| xyzModem_flush (); |
| xyz.at_eof = true; |
| break; |
| #ifdef xyzModem_zmodem |
| case xyzModem_zmodem: |
| /* Might support it some day I suppose. */ |
| #endif |
| break; |
| } |
| } |
| else |
| { |
| ZM_DEBUG (zm_dprintf ("Engaging cleanup mode...\n")); |
| /* |
| * Consume any trailing crap left in the inbuffer from |
| * previous received blocks. Since very few files are an exact multiple |
| * of the transfer block size, there will almost always be some gunk here. |
| * If we don't eat it now, RedBoot will think the user typed it. |
| */ |
| ZM_DEBUG (zm_dprintf ("Trailing gunk:\n")); |
| while ((c = (*getc) ()) > -1) |
| ; |
| ZM_DEBUG (zm_dprintf ("\n")); |
| /* |
| * Make a small delay to give terminal programs like minicom |
| * time to get control again after their file transfer program |
| * exits. |
| */ |
| CYGACC_CALL_IF_DELAY_US ((cyg_int32) 250000); |
| } |
| } |
| |
| char * |
| xyzModem_error (int err) |
| { |
| switch (err) |
| { |
| case xyzModem_access: |
| return "Can't access file"; |
| break; |
| case xyzModem_noZmodem: |
| return "Sorry, zModem not available yet"; |
| break; |
| case xyzModem_timeout: |
| return "Timed out"; |
| break; |
| case xyzModem_eof: |
| return "End of file"; |
| break; |
| case xyzModem_cancel: |
| return "Cancelled"; |
| break; |
| case xyzModem_frame: |
| return "Invalid framing"; |
| break; |
| case xyzModem_cksum: |
| return "CRC/checksum error"; |
| break; |
| case xyzModem_sequence: |
| return "Block sequence error"; |
| break; |
| default: |
| return "Unknown error"; |
| break; |
| } |
| } |
| |
| /* |
| * RedBoot interface |
| */ |