blob: 9c6c417f7eea150df402252e24767826ceca1562 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2022 Toradex
*/
#include "imx8mp-u-boot.dtsi"
/ {
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
};
wdt-reboot {
compatible = "wdt-reboot";
bootph-pre-ram;
wdt = <&wdog1>;
};
};
&{/aliases} {
eeprom0 = &eeprom_module;
eeprom1 = &eeprom_carrier_board;
eeprom2 = &eeprom_display_adapter;
};
&clk {
bootph-all;
bootph-pre-ram;
/delete-property/ assigned-clocks;
/delete-property/ assigned-clock-parents;
/delete-property/ assigned-clock-rates;
};
&crypto {
bootph-pre-ram;
};
&gpio1 {
bootph-pre-ram;
};
&gpio2 {
bootph-pre-ram;
regulator-ethphy {
gpio-hog;
gpios = <20 GPIO_ACTIVE_HIGH>;
line-name = "reg_ethphy";
output-high;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_eth>;
};
};
&gpio3 {
bootph-pre-ram;
};
&gpio4 {
bootph-pre-ram;
};
&gpio5 {
bootph-pre-ram;
};
&i2c1 {
bootph-pre-ram;
eeprom_module: eeprom@50 {
compatible = "i2c-eeprom";
pagesize = <16>;
reg = <0x50>;
};
};
&i2c2 {
bootph-pre-ram;
};
&i2c3 {
bootph-pre-ram;
};
&i2c4 {
/* EEPROM on display adapter (MIPI DSI Display Adapter) */
eeprom_display_adapter: eeprom@50 {
compatible = "i2c-eeprom";
pagesize = <16>;
reg = <0x50>;
};
/* EEPROM on carrier board */
eeprom_carrier_board: eeprom@57 {
compatible = "i2c-eeprom";
pagesize = <16>;
reg = <0x57>;
};
};
&pca9450 {
bootph-pre-ram;
};
&pinctrl_i2c1 {
bootph-pre-ram;
};
&pinctrl_usdhc2_pwr_en {
bootph-pre-ram;
u-boot,off-on-delay-us = <20000>;
};
&pinctrl_uart3 {
bootph-pre-ram;
};
&pinctrl_usdhc2_cd {
bootph-pre-ram;
};
&pinctrl_usdhc2 {
bootph-pre-ram;
};
&pinctrl_usdhc3 {
bootph-pre-ram;
};
&pinctrl_wdog {
bootph-pre-ram;
};
&reg_usdhc2_vmmc {
bootph-pre-ram;
};
&sec_jr0 {
bootph-pre-ram;
};
&sec_jr1 {
bootph-pre-ram;
};
&sec_jr2 {
bootph-pre-ram;
};
&uart3 {
bootph-pre-ram;
};
&usdhc1 {
status = "disabled";
};
&usdhc2 {
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>;
assigned-clock-rates = <400000000>;
assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
sd-uhs-ddr50;
sd-uhs-sdr104;
bootph-pre-ram;
};
&usdhc3 {
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>;
assigned-clock-rates = <400000000>;
assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
bootph-pre-ram;
};
&wdog1 {
bootph-pre-ram;
};