| // SPDX-License-Identifier: (GPL-2.0+ OR X11) |
| /* |
| * Copyright 2018 Icenowy Zheng <icenowy@aosc.io> |
| * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com> |
| */ |
| |
| #include <dt-bindings/clock/suniv-ccu-f1c100s.h> |
| #include <dt-bindings/reset/suniv-ccu-f1c100s.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&intc>; |
| |
| clocks { |
| osc24M: clk-24M { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "osc24M"; |
| }; |
| |
| osc32k: clk-32k { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| clock-output-names = "osc32k"; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,arm926ej-s"; |
| device_type = "cpu"; |
| reg = <0x0>; |
| }; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| sram-controller@1c00000 { |
| compatible = "allwinner,suniv-f1c100s-system-control", |
| "allwinner,sun4i-a10-system-control"; |
| reg = <0x01c00000 0x30>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| sram_d: sram@10000 { |
| compatible = "mmio-sram"; |
| reg = <0x00010000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x00010000 0x1000>; |
| |
| otg_sram: sram-section@0 { |
| compatible = "allwinner,suniv-f1c100s-sram-d", |
| "allwinner,sun4i-a10-sram-d"; |
| reg = <0x0000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| spi0: spi@1c05000 { |
| compatible = "allwinner,suniv-f1c100s-spi", |
| "allwinner,sun8i-h3-spi"; |
| reg = <0x01c05000 0x1000>; |
| interrupts = <10>; |
| clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>; |
| clock-names = "ahb", "mod"; |
| resets = <&ccu RST_BUS_SPI0>; |
| status = "disabled"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| spi1: spi@1c06000 { |
| compatible = "allwinner,suniv-f1c100s-spi", |
| "allwinner,sun8i-h3-spi"; |
| reg = <0x01c06000 0x1000>; |
| interrupts = <11>; |
| clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>; |
| clock-names = "ahb", "mod"; |
| resets = <&ccu RST_BUS_SPI1>; |
| status = "disabled"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc0: mmc@1c0f000 { |
| compatible = "allwinner,suniv-f1c100s-mmc", |
| "allwinner,sun7i-a20-mmc"; |
| reg = <0x01c0f000 0x1000>; |
| clocks = <&ccu CLK_BUS_MMC0>, |
| <&ccu CLK_MMC0>, |
| <&ccu CLK_MMC0_OUTPUT>, |
| <&ccu CLK_MMC0_SAMPLE>; |
| clock-names = "ahb", "mmc", "output", "sample"; |
| resets = <&ccu RST_BUS_MMC0>; |
| reset-names = "ahb"; |
| interrupts = <23>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc0_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc1: mmc@1c10000 { |
| compatible = "allwinner,suniv-f1c100s-mmc", |
| "allwinner,sun7i-a20-mmc"; |
| reg = <0x01c10000 0x1000>; |
| clocks = <&ccu CLK_BUS_MMC1>, |
| <&ccu CLK_MMC1>, |
| <&ccu CLK_MMC1_OUTPUT>, |
| <&ccu CLK_MMC1_SAMPLE>; |
| clock-names = "ahb", "mmc", "output", "sample"; |
| resets = <&ccu RST_BUS_MMC1>; |
| reset-names = "ahb"; |
| interrupts = <24>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| ccu: clock@1c20000 { |
| compatible = "allwinner,suniv-f1c100s-ccu"; |
| reg = <0x01c20000 0x400>; |
| clocks = <&osc24M>, <&osc32k>; |
| clock-names = "hosc", "losc"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| intc: interrupt-controller@1c20400 { |
| compatible = "allwinner,suniv-f1c100s-ic"; |
| reg = <0x01c20400 0x400>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| |
| pio: pinctrl@1c20800 { |
| compatible = "allwinner,suniv-f1c100s-pinctrl"; |
| reg = <0x01c20800 0x400>; |
| interrupts = <38>, <39>, <40>; |
| clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; |
| clock-names = "apb", "hosc", "losc"; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #gpio-cells = <3>; |
| |
| mmc0_pins: mmc0-pins { |
| pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; |
| function = "mmc0"; |
| drive-strength = <30>; |
| }; |
| |
| /omit-if-no-ref/ |
| i2c0_pd_pins: i2c0-pd-pins { |
| pins = "PD0", "PD12"; |
| function = "i2c0"; |
| }; |
| |
| spi0_pc_pins: spi0-pc-pins { |
| pins = "PC0", "PC1", "PC2", "PC3"; |
| function = "spi0"; |
| }; |
| |
| uart0_pe_pins: uart0-pe-pins { |
| pins = "PE0", "PE1"; |
| function = "uart0"; |
| }; |
| }; |
| |
| i2c0: i2c@1c27000 { |
| compatible = "allwinner,suniv-f1c100s-i2c", |
| "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c27000 0x400>; |
| interrupts = <7>; |
| clocks = <&ccu CLK_BUS_I2C0>; |
| resets = <&ccu RST_BUS_I2C0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@1c27400 { |
| compatible = "allwinner,suniv-f1c100s-i2c", |
| "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c27400 0x400>; |
| interrupts = <8>; |
| clocks = <&ccu CLK_BUS_I2C1>; |
| resets = <&ccu RST_BUS_I2C1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@1c27800 { |
| compatible = "allwinner,suniv-f1c100s-i2c", |
| "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c27800 0x400>; |
| interrupts = <9>; |
| clocks = <&ccu CLK_BUS_I2C2>; |
| resets = <&ccu RST_BUS_I2C2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| timer@1c20c00 { |
| compatible = "allwinner,suniv-f1c100s-timer"; |
| reg = <0x01c20c00 0x90>; |
| interrupts = <13>, <14>, <15>; |
| clocks = <&osc24M>; |
| }; |
| |
| wdt: watchdog@1c20ca0 { |
| compatible = "allwinner,suniv-f1c100s-wdt", |
| "allwinner,sun6i-a31-wdt"; |
| reg = <0x01c20ca0 0x20>; |
| interrupts = <16>; |
| clocks = <&osc32k>; |
| }; |
| |
| pwm: pwm@1c21000 { |
| compatible = "allwinner,suniv-f1c100s-pwm", |
| "allwinner,sun7i-a20-pwm"; |
| reg = <0x01c21000 0x400>; |
| clocks = <&osc24M>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| ir: ir@1c22c00 { |
| compatible = "allwinner,suniv-f1c100s-ir", |
| "allwinner,sun6i-a31-ir"; |
| reg = <0x01c22c00 0x400>; |
| clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>; |
| clock-names = "apb", "ir"; |
| resets = <&ccu RST_BUS_IR>; |
| interrupts = <6>; |
| status = "disabled"; |
| }; |
| |
| lradc: lradc@1c23400 { |
| compatible = "allwinner,suniv-f1c100s-lradc", |
| "allwinner,sun8i-a83t-r-lradc"; |
| reg = <0x01c23400 0x400>; |
| interrupts = <22>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@1c25000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c25000 0x400>; |
| interrupts = <1>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART0>; |
| resets = <&ccu RST_BUS_UART0>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@1c25400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c25400 0x400>; |
| interrupts = <2>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART1>; |
| resets = <&ccu RST_BUS_UART1>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@1c25800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c25800 0x400>; |
| interrupts = <3>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART2>; |
| resets = <&ccu RST_BUS_UART2>; |
| status = "disabled"; |
| }; |
| }; |
| }; |