arch/arm/dts/zynqmp-sm-k26-revA.dts - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0
 /*
  * dts file for Xilinx ZynqMP SM-K26 rev1/B/A
  *
  * (C) Copyright 2020 - 2021, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */

 /dts-v1/;

 #include "zynqmp.dtsi"
 #include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>

 / {
 	model = "ZynqMP SM-K26 Rev1/B/A";
 	compatible = "xlnx,zynqmp-sm-k26-rev1", "xlnx,zynqmp-sm-k26-revB",
 		     "xlnx,zynqmp-sm-k26-revA", "xlnx,zynqmp-sm-k26",
 		     "xlnx,zynqmp";

 	aliases {
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		mmc0 = &sdhci0;
 		mmc1 = &sdhci1;
 		nvmem0 = &eeprom;
 		nvmem1 = &eeprom_cc;
 		rtc0 = &rtc;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &dcc;
 		spi0 = &qspi;
 		spi1 = &spi0;
 		spi2 = &spi1;
 		usb0 = &usb0;
 		usb1 = &usb1;
 	};

 	chosen {
 		bootargs = "earlycon";
 		stdout-path = "serial1:115200n8";
 	};

 	memory@0 {
 		device_type = "memory"; /* 4GB */
 		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
 	};

 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
 		key-fwuen {
 			label = "fwuen";
 			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
 			wakeup-source;
 			autorepeat;
 		};
 	};

 	leds {
 		compatible = "gpio-leds";
 		ds35-led {
 			label = "heartbeat";
 			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};

 		ds36-led {
 			label = "vbus_det";
 			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};

 	ams {
 		compatible = "iio-hwmon";
 		io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>,
 			<&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>,
 			<&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>,
 			<&xilinx_ams 9>, <&xilinx_ams 10>, <&xilinx_ams 11>,
 			<&xilinx_ams 12>, <&xilinx_ams 13>, <&xilinx_ams 14>,
 			<&xilinx_ams 15>, <&xilinx_ams 16>, <&xilinx_ams 17>,
 			<&xilinx_ams 18>, <&xilinx_ams 19>, <&xilinx_ams 20>,
 			<&xilinx_ams 21>, <&xilinx_ams 22>, <&xilinx_ams 23>,
 			<&xilinx_ams 24>, <&xilinx_ams 25>, <&xilinx_ams 26>,
 			<&xilinx_ams 27>, <&xilinx_ams 28>, <&xilinx_ams 29>;
 	};

 	pwm-fan {
 		compatible = "pwm-fan";
 		status = "okay";
 		pwms = <&ttc0 2 40000 0>;
 	};
 };

 &modepin_gpio {
 	label = "modepin";
 };

 &ttc0 {
 	status = "okay";
 	#pwm-cells = <3>;
 };

 &uart1 { /* MIO36/MIO37 */
 	status = "okay";
 };

 &pinctrl0 {
 	status = "okay";
 	pinctrl_sdhci0_default: sdhci0-default {
 		conf {
 			groups = "sdio0_0_grp";
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 			bias-disable;
 		};

 		mux {
 			groups = "sdio0_0_grp";
 			function = "sdio0";
 		};
 	};
 };

 &qspi { /* MIO 0-5 - U143 */
 	status = "okay";
 	spi_flash: flash@0 { /* MT25QU512A */
 		compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <40000000>; /* 40MHz */

 		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;

 			partition@0 {
 				label = "Image Selector";
 				reg = <0x0 0x80000>; /* 512KB */
 				read-only;
 				lock;
 			};
 			partition@80000 {
 				label = "Image Selector Golden";
 				reg = <0x80000 0x80000>; /* 512KB */
 				read-only;
 				lock;
 			};
 			partition@100000 {
 				label = "Persistent Register";
 				reg = <0x100000 0x20000>; /* 128KB */
 			};
 			partition@120000 {
 				label = "Persistent Register Backup";
 				reg = <0x120000 0x20000>; /* 128KB */
 			};
 			partition@140000 {
 				label = "Open_1";
 				reg = <0x140000 0xC0000>; /* 768KB */
 			};
 			partition@200000 {
 				label = "Image A (FSBL, PMU, ATF, U-Boot)";
 				reg = <0x200000 0xD00000>; /* 13MB */
 			};
 			partition@f00000 {
 				label = "ImgSel Image A Catch";
 				reg = <0xF00000 0x80000>; /* 512KB */
 				read-only;
 				lock;
 			};
 			partition@f80000 {
 				label = "Image B (FSBL, PMU, ATF, U-Boot)";
 				reg = <0xF80000 0xD00000>; /* 13MB */
 			};
 			partition@1c80000 {
 				label = "ImgSel Image B Catch";
 				reg = <0x1C80000 0x80000>; /* 512KB */
 				read-only;
 				lock;
 			};
 			partition@1d00000 {
 				label = "Open_2";
 				reg = <0x1D00000 0x100000>; /* 1MB */
 			};
 			partition@1e00000 {
 				label = "Recovery Image";
 				reg = <0x1E00000 0x200000>; /* 2MB */
 				read-only;
 				lock;
 			};
 			partition@2000000 {
 				label = "Recovery Image Backup";
 				reg = <0x2000000 0x200000>; /* 2MB */
 				read-only;
 				lock;
 			};
 			partition@2200000 {
 				label = "U-Boot storage variables";
 				reg = <0x2200000 0x20000>; /* 128KB */
 			};
 			partition@2220000 {
 				label = "U-Boot storage variables backup";
 				reg = <0x2220000 0x20000>; /* 128KB */
 			};
 			partition@2240000 {
 				label = "SHA256";
 				reg = <0x2240000 0x40000>; /* 256B but 256KB sector */
 				read-only;
 				lock;
 			};
 			partition@2280000 {
 				label = "Secure OS Storage";
 				reg = <0x2280000 0x20000>; /* 128KB */
 			};
 			partition@22A0000 {
 				label = "User";
 				reg = <0x22A0000 0x1db0000>; /* 29.5 MB */
 			};
 		};
 	};
 };

 &sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdhci0_default>;
 	non-removable;
 	disable-wp;
 	bus-width = <8>;
 	xlnx,mio-bank = <0>;
 	assigned-clock-rates = <187498123>;
 };

 &spi1 { /* MIO6, 9-11 */
 	status = "okay";
 	label = "TPM";
 	num-cs = <1>;
 	tpm@0 { /* slm9670 - U144 */
 		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <18500000>;
 	};
 };

 &i2c1 {
 	status = "okay";
 	bootph-all;
 	clock-frequency = <400000>;
 	scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
 	sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;

 	eeprom: eeprom@50 { /* u46 - also at address 0x58 */
 		bootph-all;
 		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
 		reg = <0x50>;
 		/* WP pin EE_WP_EN connected to slg7x644092@68 */
 	};

 	eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */
 		bootph-all;
 		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
 		reg = <0x51>;
 	};

 	/* da9062@30 - u170 - also at address 0x31 */
 	/* da9131@33 - u167 */
 	da9131: pmic@33 {
 		compatible = "dlg,da9131";
 		reg = <0x33>;
 		regulators {
 			da9131_buck1: buck1 {
 				regulator-name = "da9131_buck1";
 				regulator-boot-on;
 				regulator-always-on;
 			};
 			da9131_buck2: buck2 {
 				regulator-name = "da9131_buck2";
 				regulator-boot-on;
 				regulator-always-on;
 			};
 		};
 	};

 	/* da9130@32 - u166 */
 	da9130: pmic@32 {
 		compatible = "dlg,da9130";
 		reg = <0x32>;
 		regulators {
 			da9130_buck1: buck1 {
 				regulator-name = "da9130_buck1";
 				regulator-boot-on;
 				regulator-always-on;
 			};
 		};
 	};

 	/* slg7x644091@70 - u168 NOT accessible due to address conflict with stdp4320 */
 	/*
 	 * stdp4320 - u27 FW has below two issues to be fixed in next board revision.
 	 * Device acknowledging to addresses 0x5C, 0x5D, 0x70, 0x72, 0x76.
 	 * Address conflict with slg7x644091@70 making both the devices NOT accessible.
 	 * With the FW fix, stdp4320 should respond to address 0x73 only.
 	 */
 	/* slg7x644092@68 - u169 */
 	/* Also connected via JA1C as C23/C24 */
 };

 &gpio {
 	status = "okay";
 	gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */
 			  "QSPI_CS_B", "SPI_CLK", "LED1", "LED2", "SPI_CS_B", /* 5 - 9 */
 			  "SPI_MISO", "SPI_MOSI", "FWUEN", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
 			  "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
 			  "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST", "I2C1_SCL", /* 20 - 24 */
 			  "I2C1_SDA", "", "", "", "", /* 25 - 29 */
 			  "", "", "", "", "", /* 30 - 34 */
 			  "", "", "", "", "", /* 35 - 39 */
 			  "", "", "", "", "", /* 40 - 44 */
 			  "", "", "", "", "", /* 45 - 49 */
 			  "", "", "", "", "", /* 50 - 54 */
 			  "", "", "", "", "", /* 55 - 59 */
 			  "", "", "", "", "", /* 60 - 64 */
 			  "", "", "", "", "", /* 65 - 69 */
 			  "", "", "", "", "", /* 70 - 74 */
 			  "", "", "", /* 75 - 77, MIO end and EMIO start */
 			  "", "", /* 78 - 79 */
 			  "", "", "", "", "", /* 80 - 84 */
 			  "", "", "", "", "", /* 85 - 89 */
 			  "", "", "", "", "", /* 90 - 94 */
 			  "", "", "", "", "", /* 95 - 99 */
 			  "", "", "", "", "", /* 100 - 104 */
 			  "", "", "", "", "", /* 105 - 109 */
 			  "", "", "", "", "", /* 110 - 114 */
 			  "", "", "", "", "", /* 115 - 119 */
 			  "", "", "", "", "", /* 120 - 124 */
 			  "", "", "", "", "", /* 125 - 129 */
 			  "", "", "", "", "", /* 130 - 134 */
 			  "", "", "", "", "", /* 135 - 139 */
 			  "", "", "", "", "", /* 140 - 144 */
 			  "", "", "", "", "", /* 145 - 149 */
 			  "", "", "", "", "", /* 150 - 154 */
 			  "", "", "", "", "", /* 155 - 159 */
 			  "", "", "", "", "", /* 160 - 164 */
 			  "", "", "", "", "", /* 165 - 169 */
 			  "", "", "", ""; /* 170 - 174 */
 };

 &xilinx_ams {
 	status = "okay";
 };

 &ams_ps {
 	status = "okay";
 };

 &ams_pl {
 	status = "okay";
 };

 &zynqmp_dpsub {
 	status = "okay";
 };

 &rtc {
 	status = "okay";
 };

 &lpd_dma_chan1 {
 	status = "okay";
 };

 &lpd_dma_chan2 {
 	status = "okay";
 };

 &lpd_dma_chan3 {
 	status = "okay";
 };

 &lpd_dma_chan4 {
 	status = "okay";
 };

 &lpd_dma_chan5 {
 	status = "okay";
 };

 &lpd_dma_chan6 {
 	status = "okay";
 };

 &lpd_dma_chan7 {
 	status = "okay";
 };

 &lpd_dma_chan8 {
 	status = "okay";
 };

 &fpd_dma_chan1 {
 	status = "okay";
 };

 &fpd_dma_chan2 {
 	status = "okay";
 };

 &fpd_dma_chan3 {
 	status = "okay";
 };

 &fpd_dma_chan4 {
 	status = "okay";
 };

 &fpd_dma_chan5 {
 	status = "okay";
 };

 &fpd_dma_chan6 {
 	status = "okay";
 };

 &fpd_dma_chan7 {
 	status = "okay";
 };

 &fpd_dma_chan8 {
 	status = "okay";
 };

 &gpu {
 	status = "okay";
 };

 &lpd_watchdog {
 	status = "okay";
 };

 &watchdog0 {
 	status = "okay";
 };

 &cpu_opp_table {
 	opp00 {
 		opp-hz = /bits/ 64 <1333333333>;
 	};
 	opp01 {
 		opp-hz = /bits/ 64 <666666666>;
 	};
 	opp02 {
 		opp-hz = /bits/ 64 <444444444>;
 	};
 	opp03 {
 		opp-hz = /bits/ 64 <333333333>;
 	};
 };
	// SPDX-License-Identifier: GPL-2.0
	/*
	* dts file for Xilinx ZynqMP SM-K26 rev1/B/A
	*
	* (C) Copyright 2020 - 2021, Xilinx, Inc.
	*
	* Michal Simek <michal.simek@xilinx.com>
	*/

	/dts-v1/;

	#include "zynqmp.dtsi"
	#include "zynqmp-clk-ccf.dtsi"
	#include <dt-bindings/input/input.h>
	#include <dt-bindings/gpio/gpio.h>
	#include <dt-bindings/phy/phy.h>
	#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>

	/ {
	model = "ZynqMP SM-K26 Rev1/B/A";
	compatible = "xlnx,zynqmp-sm-k26-rev1", "xlnx,zynqmp-sm-k26-revB",
	"xlnx,zynqmp-sm-k26-revA", "xlnx,zynqmp-sm-k26",
	"xlnx,zynqmp";

	aliases {
	i2c0 = &i2c0;
	i2c1 = &i2c1;
	mmc0 = &sdhci0;
	mmc1 = &sdhci1;
	nvmem0 = &eeprom;
	nvmem1 = &eeprom_cc;
	rtc0 = &rtc;
	serial0 = &uart0;
	serial1 = &uart1;
	serial2 = &dcc;
	spi0 = &qspi;
	spi1 = &spi0;
	spi2 = &spi1;
	usb0 = &usb0;
	usb1 = &usb1;
	};

	chosen {
	bootargs = "earlycon";
	stdout-path = "serial1:115200n8";
	};

	memory@0 {
	device_type = "memory"; /* 4GB */
	reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
	};

	gpio-keys {
	compatible = "gpio-keys";
	autorepeat;
	key-fwuen {
	label = "fwuen";
	gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
	linux,code = <BTN_MISC>;
	wakeup-source;
	autorepeat;
	};
	};

	leds {
	compatible = "gpio-leds";
	ds35-led {
	label = "heartbeat";
	gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
	linux,default-trigger = "heartbeat";
	};

	ds36-led {
	label = "vbus_det";
	gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
	default-state = "on";
	};
	};

	ams {
	compatible = "iio-hwmon";
	io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>,
	<&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>,
	<&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>,
	<&xilinx_ams 9>, <&xilinx_ams 10>, <&xilinx_ams 11>,
	<&xilinx_ams 12>, <&xilinx_ams 13>, <&xilinx_ams 14>,
	<&xilinx_ams 15>, <&xilinx_ams 16>, <&xilinx_ams 17>,
	<&xilinx_ams 18>, <&xilinx_ams 19>, <&xilinx_ams 20>,
	<&xilinx_ams 21>, <&xilinx_ams 22>, <&xilinx_ams 23>,
	<&xilinx_ams 24>, <&xilinx_ams 25>, <&xilinx_ams 26>,
	<&xilinx_ams 27>, <&xilinx_ams 28>, <&xilinx_ams 29>;
	};

	pwm-fan {
	compatible = "pwm-fan";
	status = "okay";
	pwms = <&ttc0 2 40000 0>;
	};
	};

	&modepin_gpio {
	label = "modepin";
	};

	&ttc0 {
	status = "okay";
	#pwm-cells = <3>;
	};

	&uart1 { /* MIO36/MIO37 */
	status = "okay";
	};

	&pinctrl0 {
	status = "okay";
	pinctrl_sdhci0_default: sdhci0-default {
	conf {
	groups = "sdio0_0_grp";
	slew-rate = <SLEW_RATE_SLOW>;
	power-source = <IO_STANDARD_LVCMOS18>;
	bias-disable;
	};

	mux {
	groups = "sdio0_0_grp";
	function = "sdio0";
	};
	};
	};

	&qspi { /* MIO 0-5 - U143 */
	status = "okay";
	spi_flash: flash@0 { /* MT25QU512A */
	compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */
	#address-cells = <1>;
	#size-cells = <1>;
	reg = <0>;
	spi-tx-bus-width = <4>;
	spi-rx-bus-width = <4>;
	spi-max-frequency = <40000000>; /* 40MHz */

	partitions {
	compatible = "fixed-partitions";
	#address-cells = <1>;
	#size-cells = <1>;

	partition@0 {
	label = "Image Selector";
	reg = <0x0 0x80000>; /* 512KB */
	read-only;
	lock;
	};
	partition@80000 {
	label = "Image Selector Golden";
	reg = <0x80000 0x80000>; /* 512KB */
	read-only;
	lock;
	};
	partition@100000 {
	label = "Persistent Register";
	reg = <0x100000 0x20000>; /* 128KB */
	};
	partition@120000 {
	label = "Persistent Register Backup";
	reg = <0x120000 0x20000>; /* 128KB */
	};
	partition@140000 {
	label = "Open_1";
	reg = <0x140000 0xC0000>; /* 768KB */
	};
	partition@200000 {
	label = "Image A (FSBL, PMU, ATF, U-Boot)";
	reg = <0x200000 0xD00000>; /* 13MB */
	};
	partition@f00000 {
	label = "ImgSel Image A Catch";
	reg = <0xF00000 0x80000>; /* 512KB */
	read-only;
	lock;
	};
	partition@f80000 {
	label = "Image B (FSBL, PMU, ATF, U-Boot)";
	reg = <0xF80000 0xD00000>; /* 13MB */
	};
	partition@1c80000 {
	label = "ImgSel Image B Catch";
	reg = <0x1C80000 0x80000>; /* 512KB */
	read-only;
	lock;
	};
	partition@1d00000 {
	label = "Open_2";
	reg = <0x1D00000 0x100000>; /* 1MB */
	};
	partition@1e00000 {
	label = "Recovery Image";
	reg = <0x1E00000 0x200000>; /* 2MB */
	read-only;
	lock;
	};
	partition@2000000 {
	label = "Recovery Image Backup";
	reg = <0x2000000 0x200000>; /* 2MB */
	read-only;
	lock;
	};
	partition@2200000 {
	label = "U-Boot storage variables";
	reg = <0x2200000 0x20000>; /* 128KB */
	};
	partition@2220000 {
	label = "U-Boot storage variables backup";
	reg = <0x2220000 0x20000>; /* 128KB */
	};
	partition@2240000 {
	label = "SHA256";
	reg = <0x2240000 0x40000>; /* 256B but 256KB sector */
	read-only;
	lock;
	};
	partition@2280000 {
	label = "Secure OS Storage";
	reg = <0x2280000 0x20000>; /* 128KB */
	};
	partition@22A0000 {
	label = "User";
	reg = <0x22A0000 0x1db0000>; /* 29.5 MB */
	};
	};
	};
	};

	&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sdhci0_default>;
	non-removable;
	disable-wp;
	bus-width = <8>;
	xlnx,mio-bank = <0>;
	assigned-clock-rates = <187498123>;
	};

	&spi1 { /* MIO6, 9-11 */
	status = "okay";
	label = "TPM";
	num-cs = <1>;
	tpm@0 { /* slm9670 - U144 */
	compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
	reg = <0>;
	spi-max-frequency = <18500000>;
	};
	};

	&i2c1 {
	status = "okay";
	bootph-all;
	clock-frequency = <400000>;
	scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
	sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;

	eeprom: eeprom@50 { /* u46 - also at address 0x58 */
	bootph-all;
	compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
	reg = <0x50>;
	/* WP pin EE_WP_EN connected to slg7x644092@68 */
	};

	eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */
	bootph-all;
	compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
	reg = <0x51>;
	};

	/* da9062@30 - u170 - also at address 0x31 */
	/* da9131@33 - u167 */
	da9131: pmic@33 {
	compatible = "dlg,da9131";
	reg = <0x33>;
	regulators {
	da9131_buck1: buck1 {
	regulator-name = "da9131_buck1";
	regulator-boot-on;
	regulator-always-on;
	};
	da9131_buck2: buck2 {
	regulator-name = "da9131_buck2";
	regulator-boot-on;
	regulator-always-on;
	};
	};
	};

	/* da9130@32 - u166 */
	da9130: pmic@32 {
	compatible = "dlg,da9130";
	reg = <0x32>;
	regulators {
	da9130_buck1: buck1 {
	regulator-name = "da9130_buck1";
	regulator-boot-on;
	regulator-always-on;
	};
	};
	};

	/* slg7x644091@70 - u168 NOT accessible due to address conflict with stdp4320 */
	/*
	* stdp4320 - u27 FW has below two issues to be fixed in next board revision.
	* Device acknowledging to addresses 0x5C, 0x5D, 0x70, 0x72, 0x76.
	* Address conflict with slg7x644091@70 making both the devices NOT accessible.
	* With the FW fix, stdp4320 should respond to address 0x73 only.
	*/
	/* slg7x644092@68 - u169 */
	/* Also connected via JA1C as C23/C24 */
	};

	&gpio {
	status = "okay";
	gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */
	"QSPI_CS_B", "SPI_CLK", "LED1", "LED2", "SPI_CS_B", /* 5 - 9 */
	"SPI_MISO", "SPI_MOSI", "FWUEN", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
	"EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
	"EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST", "I2C1_SCL", /* 20 - 24 */
	"I2C1_SDA", "", "", "", "", /* 25 - 29 */
	"", "", "", "", "", /* 30 - 34 */
	"", "", "", "", "", /* 35 - 39 */
	"", "", "", "", "", /* 40 - 44 */
	"", "", "", "", "", /* 45 - 49 */
	"", "", "", "", "", /* 50 - 54 */
	"", "", "", "", "", /* 55 - 59 */
	"", "", "", "", "", /* 60 - 64 */
	"", "", "", "", "", /* 65 - 69 */
	"", "", "", "", "", /* 70 - 74 */
	"", "", "", /* 75 - 77, MIO end and EMIO start */
	"", "", /* 78 - 79 */
	"", "", "", "", "", /* 80 - 84 */
	"", "", "", "", "", /* 85 - 89 */
	"", "", "", "", "", /* 90 - 94 */
	"", "", "", "", "", /* 95 - 99 */
	"", "", "", "", "", /* 100 - 104 */
	"", "", "", "", "", /* 105 - 109 */
	"", "", "", "", "", /* 110 - 114 */
	"", "", "", "", "", /* 115 - 119 */
	"", "", "", "", "", /* 120 - 124 */
	"", "", "", "", "", /* 125 - 129 */
	"", "", "", "", "", /* 130 - 134 */
	"", "", "", "", "", /* 135 - 139 */
	"", "", "", "", "", /* 140 - 144 */
	"", "", "", "", "", /* 145 - 149 */
	"", "", "", "", "", /* 150 - 154 */
	"", "", "", "", "", /* 155 - 159 */
	"", "", "", "", "", /* 160 - 164 */
	"", "", "", "", "", /* 165 - 169 */
	"", "", "", ""; /* 170 - 174 */
	};

	&xilinx_ams {
	status = "okay";
	};

	&ams_ps {
	status = "okay";
	};

	&ams_pl {
	status = "okay";
	};

	&zynqmp_dpsub {
	status = "okay";
	};

	&rtc {
	status = "okay";
	};

	&lpd_dma_chan1 {
	status = "okay";
	};

	&lpd_dma_chan2 {
	status = "okay";
	};

	&lpd_dma_chan3 {
	status = "okay";
	};

	&lpd_dma_chan4 {
	status = "okay";
	};

	&lpd_dma_chan5 {
	status = "okay";
	};

	&lpd_dma_chan6 {
	status = "okay";
	};

	&lpd_dma_chan7 {
	status = "okay";
	};

	&lpd_dma_chan8 {
	status = "okay";
	};

	&fpd_dma_chan1 {
	status = "okay";
	};

	&fpd_dma_chan2 {
	status = "okay";
	};

	&fpd_dma_chan3 {
	status = "okay";
	};

	&fpd_dma_chan4 {
	status = "okay";
	};

	&fpd_dma_chan5 {
	status = "okay";
	};

	&fpd_dma_chan6 {
	status = "okay";
	};

	&fpd_dma_chan7 {
	status = "okay";
	};

	&fpd_dma_chan8 {
	status = "okay";
	};

	&gpu {
	status = "okay";
	};

	&lpd_watchdog {
	status = "okay";
	};

	&watchdog0 {
	status = "okay";
	};

	&cpu_opp_table {
	opp00 {
	opp-hz = /bits/ 64 <1333333333>;
	};
	opp01 {
	opp-hz = /bits/ 64 <666666666>;
	};
	opp02 {
	opp-hz = /bits/ 64 <444444444>;
	};
	opp03 {
	opp-hz = /bits/ 64 <333333333>;
	};
	};