| /* |
| * Copyright (C) 2012-2017 Altera Corporation <www.altera.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <errno.h> |
| #include <fdtdec.h> |
| #include <libfdt.h> |
| #include <altera.h> |
| #include <miiphy.h> |
| #include <netdev.h> |
| #include <watchdog.h> |
| #include <asm/arch/misc.h> |
| #include <asm/arch/reset_manager.h> |
| #include <asm/arch/scan_manager.h> |
| #include <asm/arch/sdram.h> |
| #include <asm/arch/system_manager.h> |
| #include <asm/arch/nic301.h> |
| #include <asm/arch/scu.h> |
| #include <asm/pl310.h> |
| |
| #include <dt-bindings/reset/altr,rst-mgr.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static struct pl310_regs *const pl310 = |
| (struct pl310_regs *)CONFIG_SYS_PL310_BASE; |
| static struct socfpga_system_manager *sysmgr_regs = |
| (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; |
| static struct socfpga_reset_manager *reset_manager_base = |
| (struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS; |
| static struct nic301_registers *nic301_regs = |
| (struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS; |
| static struct scu_registers *scu_regs = |
| (struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS; |
| static struct socfpga_sdr_ctrl *sdr_ctrl = |
| (struct socfpga_sdr_ctrl *)SDR_CTRLGRP_ADDRESS; |
| |
| /* |
| * DesignWare Ethernet initialization |
| */ |
| #ifdef CONFIG_ETH_DESIGNWARE |
| void dwmac_deassert_reset(const unsigned int of_reset_id, |
| const u32 phymode) |
| { |
| u32 physhift, reset; |
| |
| if (of_reset_id == EMAC0_RESET) { |
| physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB; |
| reset = SOCFPGA_RESET(EMAC0); |
| } else if (of_reset_id == EMAC1_RESET) { |
| physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB; |
| reset = SOCFPGA_RESET(EMAC1); |
| } else { |
| printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id); |
| return; |
| } |
| |
| /* configure to PHY interface select choosed */ |
| clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl, |
| SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift, |
| phymode << physhift); |
| |
| /* Release the EMAC controller from reset */ |
| socfpga_per_reset(reset, 0); |
| } |
| |
| static u32 dwmac_phymode_to_modereg(const char *phymode, u32 *modereg) |
| { |
| if (!phymode) |
| return -EINVAL; |
| |
| if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii")) { |
| *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; |
| return 0; |
| } |
| |
| if (!strcmp(phymode, "rgmii")) { |
| *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII; |
| return 0; |
| } |
| |
| if (!strcmp(phymode, "rmii")) { |
| *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII; |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int socfpga_eth_reset(void) |
| { |
| const void *fdt = gd->fdt_blob; |
| struct fdtdec_phandle_args args; |
| const char *phy_mode; |
| u32 phy_modereg; |
| int nodes[2]; /* Max. two GMACs */ |
| int ret, count; |
| int i, node; |
| |
| /* Put both GMACs into RESET state. */ |
| socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1); |
| socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1); |
| |
| count = fdtdec_find_aliases_for_id(fdt, "ethernet", |
| COMPAT_ALTERA_SOCFPGA_DWMAC, |
| nodes, ARRAY_SIZE(nodes)); |
| for (i = 0; i < count; i++) { |
| node = nodes[i]; |
| if (node <= 0) |
| continue; |
| |
| ret = fdtdec_parse_phandle_with_args(fdt, node, "resets", |
| "#reset-cells", 1, 0, |
| &args); |
| if (ret || (args.args_count != 1)) { |
| debug("GMAC%i: Failed to parse DT 'resets'!\n", i); |
| continue; |
| } |
| |
| phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL); |
| ret = dwmac_phymode_to_modereg(phy_mode, &phy_modereg); |
| if (ret) { |
| debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i); |
| continue; |
| } |
| |
| dwmac_deassert_reset(args.args[0], phy_modereg); |
| } |
| |
| return 0; |
| } |
| #else |
| static int socfpga_eth_reset(void) |
| { |
| return 0; |
| }; |
| #endif |
| |
| static const struct { |
| const u16 pn; |
| const char *name; |
| const char *var; |
| } socfpga_fpga_model[] = { |
| /* Cyclone V E */ |
| { 0x2b15, "Cyclone V, E/A2", "cv_e_a2" }, |
| { 0x2b05, "Cyclone V, E/A4", "cv_e_a4" }, |
| { 0x2b22, "Cyclone V, E/A5", "cv_e_a5" }, |
| { 0x2b13, "Cyclone V, E/A7", "cv_e_a7" }, |
| { 0x2b14, "Cyclone V, E/A9", "cv_e_a9" }, |
| /* Cyclone V GX/GT */ |
| { 0x2b01, "Cyclone V, GX/C3", "cv_gx_c3" }, |
| { 0x2b12, "Cyclone V, GX/C4", "cv_gx_c4" }, |
| { 0x2b02, "Cyclone V, GX/C5 or GT/D5", "cv_gx_c5" }, |
| { 0x2b03, "Cyclone V, GX/C7 or GT/D7", "cv_gx_c7" }, |
| { 0x2b04, "Cyclone V, GX/C9 or GT/D9", "cv_gx_c9" }, |
| /* Cyclone V SE/SX/ST */ |
| { 0x2d11, "Cyclone V, SE/A2 or SX/C2", "cv_se_a2" }, |
| { 0x2d01, "Cyclone V, SE/A4 or SX/C4", "cv_se_a4" }, |
| { 0x2d12, "Cyclone V, SE/A5 or SX/C5 or ST/D5", "cv_se_a5" }, |
| { 0x2d02, "Cyclone V, SE/A6 or SX/C6 or ST/D6", "cv_se_a6" }, |
| /* Arria V */ |
| { 0x2d03, "Arria V, D5", "av_d5" }, |
| }; |
| |
| static int socfpga_fpga_id(const bool print_id) |
| { |
| const u32 altera_mi = 0x6e; |
| const u32 id = scan_mgr_get_fpga_id(); |
| |
| const u32 lsb = id & 0x00000001; |
| const u32 mi = (id >> 1) & 0x000007ff; |
| const u32 pn = (id >> 12) & 0x0000ffff; |
| const u32 version = (id >> 28) & 0x0000000f; |
| int i; |
| |
| if ((mi != altera_mi) || (lsb != 1)) { |
| printf("FPGA: Not Altera chip ID\n"); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(socfpga_fpga_model); i++) |
| if (pn == socfpga_fpga_model[i].pn) |
| break; |
| |
| if (i == ARRAY_SIZE(socfpga_fpga_model)) { |
| printf("FPGA: Unknown Altera chip, ID 0x%08x\n", id); |
| return -EINVAL; |
| } |
| |
| if (print_id) |
| printf("FPGA: Altera %s, version 0x%01x\n", |
| socfpga_fpga_model[i].name, version); |
| return i; |
| } |
| |
| /* |
| * Print CPU information |
| */ |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| int print_cpuinfo(void) |
| { |
| const u32 bsel = |
| SYSMGR_GET_BOOTINFO_BSEL(readl(&sysmgr_regs->bootinfo)); |
| |
| puts("CPU: Altera SoCFPGA Platform\n"); |
| socfpga_fpga_id(1); |
| |
| printf("BOOT: %s\n", bsel_str[bsel].name); |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_ARCH_MISC_INIT |
| int arch_misc_init(void) |
| { |
| const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7; |
| const int fpga_id = socfpga_fpga_id(0); |
| env_set("bootmode", bsel_str[bsel].mode); |
| if (fpga_id >= 0) |
| env_set("fpgatype", socfpga_fpga_model[fpga_id].var); |
| return socfpga_eth_reset(); |
| } |
| #endif |
| |
| /* |
| * Convert all NIC-301 AMBA slaves from secure to non-secure |
| */ |
| static void socfpga_nic301_slave_ns(void) |
| { |
| writel(0x1, &nic301_regs->lwhps2fpgaregs); |
| writel(0x1, &nic301_regs->hps2fpgaregs); |
| writel(0x1, &nic301_regs->acp); |
| writel(0x1, &nic301_regs->rom); |
| writel(0x1, &nic301_regs->ocram); |
| writel(0x1, &nic301_regs->sdrdata); |
| } |
| |
| static u32 iswgrp_handoff[8]; |
| |
| int arch_early_init_r(void) |
| { |
| int i; |
| |
| /* |
| * Write magic value into magic register to unlock support for |
| * issuing warm reset. The ancient kernel code expects this |
| * value to be written into the register by the bootloader, so |
| * to support that old code, we write it here instead of in the |
| * reset_cpu() function just before resetting the CPU. |
| */ |
| writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable); |
| |
| for (i = 0; i < 8; i++) /* Cache initial SW setting regs */ |
| iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]); |
| |
| socfpga_bridges_reset(1); |
| |
| socfpga_nic301_slave_ns(); |
| |
| /* |
| * Private components security: |
| * U-Boot : configure private timer, global timer and cpu component |
| * access as non secure for kernel stage (as required by Linux) |
| */ |
| setbits_le32(&scu_regs->sacr, 0xfff); |
| |
| /* Configure the L2 controller to make SDRAM start at 0 */ |
| #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET |
| writel(0x2, &nic301_regs->remap); |
| #else |
| writel(0x1, &nic301_regs->remap); /* remap.mpuzero */ |
| writel(0x1, &pl310->pl310_addr_filter_start); |
| #endif |
| |
| /* Add device descriptor to FPGA device table */ |
| socfpga_fpga_add(); |
| |
| #ifdef CONFIG_DESIGNWARE_SPI |
| /* Get Designware SPI controller out of reset */ |
| socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0); |
| socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0); |
| #endif |
| |
| #ifdef CONFIG_NAND_DENALI |
| socfpga_per_reset(SOCFPGA_RESET(NAND), 0); |
| #endif |
| |
| return 0; |
| } |
| |
| static void socfpga_sdram_apply_static_cfg(void) |
| { |
| const u32 applymask = 0x8; |
| u32 val = readl(&sdr_ctrl->static_cfg) | applymask; |
| |
| /* |
| * SDRAM staticcfg register specific: |
| * When applying the register setting, the CPU must not access |
| * SDRAM. Luckily for us, we can abuse i-cache here to help us |
| * circumvent the SDRAM access issue. The idea is to make sure |
| * that the code is in one full i-cache line by branching past |
| * it and back. Once it is in the i-cache, we execute the core |
| * of the code and apply the register settings. |
| * |
| * The code below uses 7 instructions, while the Cortex-A9 has |
| * 32-byte cachelines, thus the limit is 8 instructions total. |
| */ |
| asm volatile( |
| ".align 5 \n" |
| " b 2f \n" |
| "1: str %0, [%1] \n" |
| " dsb \n" |
| " isb \n" |
| " b 3f \n" |
| "2: b 1b \n" |
| "3: nop \n" |
| : : "r"(val), "r"(&sdr_ctrl->static_cfg) : "memory", "cc"); |
| } |
| |
| int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| if (argc != 2) |
| return CMD_RET_USAGE; |
| |
| argv++; |
| |
| switch (*argv[0]) { |
| case 'e': /* Enable */ |
| writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module); |
| socfpga_sdram_apply_static_cfg(); |
| writel(iswgrp_handoff[3], &sdr_ctrl->fpgaport_rst); |
| writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset); |
| writel(iswgrp_handoff[1], &nic301_regs->remap); |
| break; |
| case 'd': /* Disable */ |
| writel(0, &sysmgr_regs->fpgaintfgrp_module); |
| writel(0, &sdr_ctrl->fpgaport_rst); |
| socfpga_sdram_apply_static_cfg(); |
| writel(0, &reset_manager_base->brg_mod_reset); |
| writel(1, &nic301_regs->remap); |
| break; |
| default: |
| return CMD_RET_USAGE; |
| } |
| |
| return 0; |
| } |
| |
| U_BOOT_CMD( |
| bridge, 2, 1, do_bridge, |
| "SoCFPGA HPS FPGA bridge control", |
| "enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n" |
| "bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n" |
| "" |
| ); |