| CONFIG_ARM=y |
| CONFIG_ARCH_ROCKCHIP=y |
| CONFIG_SYS_TEXT_BASE=0x00200000 |
| CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| CONFIG_SYS_MALLOC_F_LEN=0x4000 |
| CONFIG_ROCKCHIP_RK3399=y |
| CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000 |
| CONFIG_TARGET_ROCK960_RK3399=y |
| CONFIG_DEBUG_UART_BASE=0xFF1A0000 |
| CONFIG_DEBUG_UART_CLOCK=24000000 |
| CONFIG_SPL_STACK_R_ADDR=0x80000 |
| CONFIG_DEBUG_UART=y |
| CONFIG_FIT=y |
| CONFIG_SPL_LOAD_FIT=y |
| CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py" |
| # CONFIG_DISPLAY_CPUINFO is not set |
| CONFIG_DISPLAY_BOARDINFO_LATE=y |
| CONFIG_SPL_STACK_R=y |
| CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 |
| CONFIG_SPL_ATF=y |
| CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y |
| CONFIG_CMD_BOOTZ=y |
| CONFIG_CMD_GPT=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_SF=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_TIME=y |
| CONFIG_SPL_OF_CONTROL=y |
| CONFIG_DEFAULT_DEVICE_TREE="rk3399-ficus" |
| CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" |
| CONFIG_ENV_IS_IN_MMC=y |
| CONFIG_NET_RANDOM_ETHADDR=y |
| CONFIG_REGMAP=y |
| CONFIG_SPL_REGMAP=y |
| CONFIG_SYSCON=y |
| CONFIG_SPL_SYSCON=y |
| CONFIG_CLK=y |
| CONFIG_SPL_CLK=y |
| CONFIG_ROCKCHIP_GPIO=y |
| CONFIG_SYS_I2C_ROCKCHIP=y |
| CONFIG_MMC_DW=y |
| CONFIG_MMC_DW_ROCKCHIP=y |
| CONFIG_MMC_SDHCI=y |
| CONFIG_MMC_SDHCI_ROCKCHIP=y |
| CONFIG_SF_DEFAULT_SPEED=20000000 |
| CONFIG_DM_ETH=y |
| CONFIG_ETH_DESIGNWARE=y |
| CONFIG_RGMII=y |
| CONFIG_GMAC_ROCKCHIP=y |
| CONFIG_PINCTRL=y |
| CONFIG_SPL_PINCTRL=y |
| CONFIG_DM_PMIC=y |
| CONFIG_PMIC_RK8XX=y |
| CONFIG_REGULATOR_PWM=y |
| CONFIG_DM_REGULATOR_FIXED=y |
| CONFIG_DM_REGULATOR_GPIO=y |
| CONFIG_REGULATOR_RK8XX=y |
| CONFIG_PWM_ROCKCHIP=y |
| CONFIG_RAM=y |
| CONFIG_SPL_RAM=y |
| CONFIG_BAUDRATE=1500000 |
| CONFIG_DEBUG_UART_SHIFT=2 |
| CONFIG_SYSRESET=y |
| CONFIG_USB=y |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_EHCI_GENERIC=y |
| CONFIG_USE_TINY_PRINTF=y |
| CONFIG_ERRNO_STR=y |