global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/mach-omap2/emif-common.c b/arch/arm/mach-omap2/emif-common.c
index 312f868..a6a97af 100644
--- a/arch/arm/mach-omap2/emif-common.c
+++ b/arch/arm/mach-omap2/emif-common.c
@@ -389,7 +389,7 @@
/* Set region1 memory with 0 */
rgn_start = (regs->emif_ecc_address_range_1 &
EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16;
- rgn = rgn_start + CONFIG_SYS_SDRAM_BASE;
+ rgn = rgn_start + CFG_SYS_SDRAM_BASE;
size = (regs->emif_ecc_address_range_1 &
EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0x10000 - rgn_start;
@@ -400,7 +400,7 @@
/* Set region2 memory with 0 */
rgn_start = (regs->emif_ecc_address_range_2 &
EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16;
- rgn = rgn_start + CONFIG_SYS_SDRAM_BASE;
+ rgn = rgn_start + CFG_SYS_SDRAM_BASE;
size = (regs->emif_ecc_address_range_2 &
EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0x10000 - rgn_start;
@@ -1340,7 +1340,7 @@
mapped_size = 0;
section_cnt = 3;
- sys_addr = CONFIG_SYS_SDRAM_BASE;
+ sys_addr = CFG_SYS_SDRAM_BASE;
emif1_size = get_emif_mem_size(EMIF1_BASE);
emif2_size = get_emif_mem_size(EMIF2_BASE);
debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size);
@@ -1568,7 +1568,7 @@
size_prog = log_2_n_round_down(size_prog);
size_prog = (1 << size_prog);
- size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+ size_detect = get_ram_size((long *)CFG_SYS_SDRAM_BASE,
size_prog);
/* Compare with the size programmed */
if (size_detect != size_prog) {