blob: 3c9420cf91a1ee25946cdc43c2a8f6d5bc8daf67 [file] [log] [blame]
/*
* Copyright (C) 2008 Atmel Corporation
*
* Configuration settings for the Favr-32 EarthLCD LCD kit.
*
* See file CREDITS for list of people who contributed to this project.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59 Temple
* Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/arch/memory-map.h>
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7000 1
#define CONFIG_FAVR32_EZKIT 1
#define CONFIG_FAVR32_EZKIT_EXT_FLASH 1
/*
* Timer clock frequency. We're using the CPU-internal COUNT register
* for this, so this is equivalent to the CPU core clock frequency
*/
#define CFG_HZ 1000
/*
* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
* frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
* PLL frequency.
* (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
*/
#define CONFIG_PLL 1
#define CFG_POWER_MANAGER 1
#define CFG_OSC0_HZ 20000000
#define CFG_PLL0_DIV 1
#define CFG_PLL0_MUL 7
#define CFG_PLL0_SUPPRESS_CYCLES 16
/*
* Set the CPU running at:
* PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
*/
#define CFG_CLKDIV_CPU 0
/*
* Set the HSB running at:
* PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
*/
#define CFG_CLKDIV_HSB 1
/*
* Set the PBA running at:
* PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
*/
#define CFG_CLKDIV_PBA 2
/*
* Set the PBB running at:
* PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
*/
#define CFG_CLKDIV_PBB 1
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
* ivco = PLLOPT<1:0>
*
* We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
*/
#define CFG_PLL0_OPT 0x04
#undef CONFIG_USART0
#undef CONFIG_USART1
#undef CONFIG_USART2
#define CONFIG_USART3 1
/* User serviceable stuff */
#define CONFIG_DOS_PARTITION 1
#define CONFIG_CMDLINE_TAG 1
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
#define CONFIG_STACKSIZE (2048)
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS \
"root=/dev/mtdblock1 rootfstype=jffs fbmem=1800k"
#define CONFIG_BOOTCOMMAND \
"fsload; bootm $(fileaddr)"
/*
* Only interrupt autoboot if <space> is pressed. Otherwise, garbage
* data on the serial line may interrupt the boot sequence.
*/
#define CONFIG_BOOTDELAY 1
#define CONFIG_AUTOBOOT 1
#define CONFIG_AUTOBOOT_KEYED 1
#define CONFIG_AUTOBOOT_PROMPT \
"Press SPACE to abort autoboot in %d seconds\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
/*
* After booting the board for the first time, new ethernet addresses
* should be generated and assigned to the environment variables
* "ethaddr" and "eth1addr". This is normally done during production.
*/
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
#define CONFIG_NET_MULTI 1
/*
* BOOTP options
*/
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MMC
#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
#undef CONFIG_CMD_XIMG
#define CONFIG_ATMEL_USART 1
#define CONFIG_MACB 1
#define CONFIG_PORTMUX_PIO 1
#define CFG_NR_PIOS 5
#define CFG_HSDRAMC 1
#define CONFIG_MMC 1
#define CONFIG_ATMEL_MCI 1
#define CFG_DCACHE_LINESZ 32
#define CFG_ICACHE_LINESZ 32
#define CONFIG_NR_DRAM_BANKS 1
/* External flash on Favr-32 */
#if 0
#define CFG_FLASH_CFI 1
#define CFG_FLASH_CFI_DRIVER 1
#endif
#define CFG_FLASH_BASE 0x00000000
#define CFG_FLASH_SIZE 0x800000
#define CFG_MAX_FLASH_BANKS 1
#define CFG_MAX_FLASH_SECT 135
#define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
#define CFG_SDRAM_BASE EBI_SDRAM_BASE
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
#define CFG_MALLOC_LEN (256*1024)
#define CFG_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
#define CFG_PROMPT "U-Boot> "
#define CFG_CBSIZE 256
#define CFG_MAXARGS 16
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
#define CFG_MEMTEST_START EBI_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
#endif /* __CONFIG_H */