blob: fe26b731833d93d2edbd05712a55fae680aebb5e [file] [log] [blame]
/*
* Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/mx31.h>
#include <asm/arch/mx31-regs.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
}
int board_init(void)
{
int i;
#if 0
/* CS0: Nor Flash */
/*
* These are values from the RedBoot sources by Freescale. However,
* under U-Boot with this configuration 32-bit accesses don't work,
* lower 16 bits of data are read twice for each 32-bit read.
*/
__REG(CSCR_U(0)) = 0x23524E80;
__REG(CSCR_L(0)) = 0x10000D03; /* WRAP bit (1) is suspicious here, but
* disabling it doesn't help either */
__REG(CSCR_A(0)) = 0x00720900;
#endif
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
/* PBC setup */
/* Enable UART transceivers also reset the Ethernet/external UART */
readw(CS4_BASE + 4);
writew(0x8023, CS4_BASE + 4);
/* RedBoot also has an empty loop with 100000 iterations here -
* clock doesn't run yet */
for (i = 0; i < 100000; i++)
;
/* Clear the reset, toggle the LEDs */
writew(0xDF, CS4_BASE + 6);
/* clock still doesn't run */
for (i = 0; i < 100000; i++)
;
/* See 1.5.4 in IMX31ADSE_PERI_BUS_CNTRL_CPLD_RM.pdf */
readb(CS4_BASE + 8);
readb(CS4_BASE + 7);
readb(CS4_BASE + 8);
readb(CS4_BASE + 7);
gd->bd->bi_arch_number = 447; /* board id for linux */
gd->bd->bi_boot_params = 0x80000100; /* adress of boot parameters */
return 0;
}
int checkboard(void)
{
printf("Board: MX31ADS\n");
return 0;
}