include/configs/SPD823TS.h - platform/external/u-boot - Gitiles

 /*
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 /*
  * board/config.h - configuration options, board specific
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  * (easy to change)
  */

 #define CONFIG_MPC823		1	/* This is a MPC823 CPU		*/
 #define CONFIG_SPD823TS		1	/* ...on a SPD823TS board	*/

 #define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #undef	CONFIG_8xx_CONS_SMC2
 #undef	CONFIG_8xx_CONS_NONE
 #define CONFIG_BAUDRATE		115200
 #if 0
 #define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
 #else
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 #endif

 #define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */

 #define CONFIG_BOOTCOMMAND	"bootp" /* autoboot command		*/

 #define CONFIG_BOOTARGS		"root=/dev/nfs rw "			\
 				"nfsroot=10.0.0.2:/opt/eldk/ppc_8xx "	\
 				"nfsaddrs=10.0.0.99:10.0.0.2"

 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/

 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/


 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_IDE

 #undef CONFIG_CMD_FLASH


 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION

 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE


 /*----------------------------------------------------------------------*/
 #define CONFIG_ETHADDR		00:D0:93:00:01:CB
 #define CONFIG_IPADDR		10.0.0.98
 #define CONFIG_SERVERIP		10.0.0.1
 #undef	CONFIG_BOOTCOMMAND
 #define CONFIG_BOOTCOMMAND	"tftp 200000 uImage;bootm 200000"
 /*----------------------------------------------------------------------*/

 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
 #define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

 #define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
 #define CONFIG_SYS_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/

 #define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */

 #define CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/

 #define CONFIG_SYS_PC_IDE_RESET	((ushort)0x0008)	/* PC 12	*/

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
 #define CONFIG_SYS_IMMR		0xFFF00000 /* was: 0xFF000000 */

 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
 #define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
 #define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_FLASH_BASE		0xFF000000
 #ifdef	DEBUG
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
 #else
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #endif
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/

 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #define CONFIG_SYS_MAX_FLASH_BANKS	0	/* max number of memory banks		*/
 #define CONFIG_SYS_MAX_FLASH_SECT	0	/* max number of sectors on one chip	*/

 #define CONFIG_SYS_FLASH_ERASE_TOUT	0	/* Timeout for Flash Erase (in ms)	*/
 #define CONFIG_SYS_FLASH_WRITE_TOUT	0	/* Timeout for Flash Write (in ms)	*/

 #define	CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
 #define CONFIG_ENV_SIZE		0x0800	/* Total Size of Environment Sector	*/
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif

 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control				11-9
  * SYPCR can only be written once after reset!
  *-----------------------------------------------------------------------
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
 #define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
 #define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif

 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				11-6
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
 /* 0x00000040 */
 #define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC00 | SIUMCR_GB5E)

 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
 #define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)

 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
 #define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)

 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
  *-----------------------------------------------------------------------
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit, set PLL multiplication factor !
  */
 /* 0x00b0c0c0 */
 #define CONFIG_SYS_PLPRCR							\
 		(	(11 << PLPRCR_MF_SHIFT) |			\
 			PLPRCR_SPLSS | PLPRCR_TEXPS | /*PLPRCR_TMIST|*/ \
 			/*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL |		\
 			PLPRCR_CSR   | PLPRCR_LOLRE /*|PLPRCR_FIOPD*/	\
 		)

 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
  *-----------------------------------------------------------------------
  * Set clock output, timebase and RTC source and divider,
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
 /* 0x01800014 */
 #define CONFIG_SYS_SCCR	(SCCR_COM00	| /*SCCR_TBS|*/		\
 			 SCCR_RTDIV	|   SCCR_RTSEL	  |	\
 			 /*SCCR_CRQEN|*/  /*SCCR_PRQEN|*/	\
 			 SCCR_EBDF00	|   SCCR_DFSYNC00 |	\
 			 SCCR_DFBRG00	|   SCCR_DFNL000  |	\
 			 SCCR_DFNH000	|   SCCR_DFLCD101 |	\
 			 SCCR_DFALCD00)

 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register
  *-----------------------------------------------------------------------
  */
 /* 0x00C3 */
 #define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)


 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration Register
  *-----------------------------------------------------------------------
  */
 /* TIMEP=2 */
 #define CONFIG_SYS_RCCR 0x0200

 /*-----------------------------------------------------------------------
  * RMDS - RISC Microcode Development Support Control Register
  *-----------------------------------------------------------------------
  */
 #define CONFIG_SYS_RMDS 0

 /*-----------------------------------------------------------------------
  * SDSR - SDMA Status Register
  *-----------------------------------------------------------------------
  */
 #define CONFIG_SYS_SDSR ((u_char)0x83)

 /*-----------------------------------------------------------------------
  * SDMR - SDMA Mask Register
  *-----------------------------------------------------------------------
  */
 #define CONFIG_SYS_SDMR ((u_char)0x00)

 /*-----------------------------------------------------------------------
  *
  * Interrupt Levels
  *-----------------------------------------------------------------------
  */
 #define CONFIG_SYS_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/

 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  *
  */
 #define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
 #define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
 #define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
 #define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
 #define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
 #define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
 #define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
 #define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )

 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
  *-----------------------------------------------------------------------
  */
 #define CONFIG_IDE_8xx_DIRECT	1	/* PCMCIA interface required	*/
 #define CONFIG_IDE_LED		1	/* LED   for ide supported	*/
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/

 #define CONFIG_SYS_IDE_MAXBUS		2	/* max. 2 IDE busses		*/
 #define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */

 #define CONFIG_SYS_ATA_BASE_ADDR	0xFE100000
 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 #define CONFIG_SYS_ATA_IDE1_OFFSET	0x0C00

 #define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
 #define CONFIG_SYS_ATA_REG_OFFSET	0x0080	/* Offset for normal register accesses	*/
 #define CONFIG_SYS_ATA_ALT_OFFSET	0x0100	/* Offset for alternate registers	*/

 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
 #define CONFIG_SYS_DER 0

 /*
  * Init Memory Controller:
  *
  * BR0/1 and OR0/1 (FLASH)
  */

 #define FLASH_BASE0_PRELIM	0xFF000000	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0xFF080000	/* FLASH bank #1	*/

 /* used to re-map FLASH both when starting from SRAM or FLASH:
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
 /* EPROMs are 512kb */
 #define CONFIG_SYS_REMAP_OR_AM		0xFFF80000	/* OR addr mask */
 #define CONFIG_SYS_PRELIM_OR_AM	0xFFF80000	/* OR addr mask */

 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
 #define CONFIG_SYS_OR_TIMING_FLASH	(/* OR_CSNT_SAM | */ OR_ACS_DIV4 | OR_BI | \
 				 OR_SCY_5_CLK | OR_EHTR)

 #define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
 #define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 /* 16 bit, bank valid */
 #define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )

 #define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
 #define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
 /* 16 bit, bank valid */
 #define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )

 /*
  * BR2-5 and OR2-5 (SRAM/SDRAM/PER8/SHARC)
  *
  */
 #define SRAM_BASE	0xFE200000	/* SRAM bank */
 #define SRAM_OR_AM	0xFFE00000	/* SRAM is 2 MB */

 #define SDRAM_BASE3_PRELIM	0x00000000	/* SDRAM bank */
 #define SDRAM_PRELIM_OR_AM	0xF8000000	/* map max. 128 MB */
 #define SDRAM_MAX_SIZE		0x04000000	/* max 64 MB SDRAM */

 #define PER8_BASE	0xFE000000	/* PER8 bank */
 #define PER8_OR_AM	0xFFF00000	/* PER8 is 1 MB */

 #define SHARC_BASE	0xFE400000	/* SHARC bank */
 #define SHARC_OR_AM	0xFFC00000	/* SHARC is 4 MB */

 /* SRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/

 #define CONFIG_SYS_OR_TIMING_SRAM	0x00000D42	/* SRAM-Timing */
 #define CONFIG_SYS_OR2 (SRAM_OR_AM | CONFIG_SYS_OR_TIMING_SRAM )
 #define CONFIG_SYS_BR2 ((SRAM_BASE & BR_BA_MSK) | BR_PS_16 | BR_V )

 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/

 #define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00	/* SDRAM-Timing */
 #define CONFIG_SYS_OR3_PRELIM	(SDRAM_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
 #define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V )

 #define CONFIG_SYS_OR_TIMING_PER8	0x00000F32	/* PER8-Timing */
 #define CONFIG_SYS_OR4 (PER8_OR_AM | CONFIG_SYS_OR_TIMING_PER8 )
 #define CONFIG_SYS_BR4 ((PER8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )

 #define CONFIG_SYS_OR_TIMING_SHARC	0x00000700	/* SHARC-Timing */
 #define CONFIG_SYS_OR5 (SHARC_OR_AM | CONFIG_SYS_OR_TIMING_SHARC )
 #define CONFIG_SYS_BR5 ((SHARC_BASE & BR_BA_MSK) | BR_PS_32 | BR_MS_UPMA | BR_V )
 /*
  * Memory Periodic Timer Prescaler
  */

 /* periodic timer for refresh */
 #define CONFIG_SYS_MBMR_PTB	204

 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
 #define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
 #define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/

 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
 #define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
 #define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/

 /*
  * MBMR settings for SDRAM
  */

 /* 8 column SDRAM */
 #define CONFIG_SYS_MBMR_8COL	((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT)  | \
 			 MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |	\
 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)

 /*
  * Internal Definitions
  *
  * Boot Flags
  */
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/

 #endif	/* __CONFIG_H */
	/*
	* (C) Copyright 2000
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	/*
	* board/config.h - configuration options, board specific
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	* (easy to change)
	*/

	#define CONFIG_MPC823 1 /* This is a MPC823 CPU */
	#define CONFIG_SPD823TS 1 /* ...on a SPD823TS board */

	#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
	#undef CONFIG_8xx_CONS_SMC2
	#undef CONFIG_8xx_CONS_NONE
	#define CONFIG_BAUDRATE 115200
	#if 0
	#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
	#else
	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	#endif

	#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */

	#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */

	#define CONFIG_BOOTARGS "root=/dev/nfs rw " \
	"nfsroot=10.0.0.2:/opt/eldk/ppc_8xx " \
	"nfsaddrs=10.0.0.99:10.0.0.2"

	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */

	#undef CONFIG_WATCHDOG /* watchdog disabled */


	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>

	#define CONFIG_CMD_IDE

	#undef CONFIG_CMD_FLASH


	#define CONFIG_MAC_PARTITION
	#define CONFIG_DOS_PARTITION

	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_SUBNETMASK
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_BOOTFILESIZE


	/----------------------------------------------------------------------/
	#define CONFIG_ETHADDR 00:D0:93:00:01:CB
	#define CONFIG_IPADDR 10.0.0.98
	#define CONFIG_SERVERIP 10.0.0.1
	#undef CONFIG_BOOTCOMMAND
	#define CONFIG_BOOTCOMMAND "tftp 200000 uImage;bootm 200000"
	/----------------------------------------------------------------------/

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
	#if defined(CONFIG_CMD_KGDB)
	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

	#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
	#define CONFIG_SYS_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */

	#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */

	#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */

	#define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0008) /* PC 12 */

	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }

	/*
	* Low Level Configuration Settings
	* (address mappings, register initial values, etc.)
	* You should know what you are doing if you make changes here.
	*/
	/*-----------------------------------------------------------------------
	* Internal Memory Mapped Register
	*/
	#define CONFIG_SYS_IMMR 0xFFF00000 /* was: 0xFF000000 */

	/*-----------------------------------------------------------------------
	* Definitions for initial stack pointer and data area (in DPRAM)
	*/
	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
	#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
	#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET

	/*-----------------------------------------------------------------------
	* Start addresses for the final memory configuration
	* (Set up by the startup code)
	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
	*/
	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	#define CONFIG_SYS_FLASH_BASE 0xFF000000
	#ifdef DEBUG
	#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */
	#else
	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	#endif
	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 8 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	/*-----------------------------------------------------------------------
	* FLASH organization
	*/
	#define CONFIG_SYS_MAX_FLASH_BANKS 0 /* max number of memory banks */
	#define CONFIG_SYS_MAX_FLASH_SECT 0 /* max number of sectors on one chip */

	#define CONFIG_SYS_FLASH_ERASE_TOUT 0 /* Timeout for Flash Erase (in ms) */
	#define CONFIG_SYS_FLASH_WRITE_TOUT 0 /* Timeout for Flash Write (in ms) */

	#define CONFIG_ENV_IS_IN_FLASH 1
	#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
	#define CONFIG_ENV_SIZE 0x0800 /* Total Size of Environment Sector */
	/*-----------------------------------------------------------------------
	* Cache Configuration
	*/
	#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
	#if defined(CONFIG_CMD_KGDB)
	#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
	#endif

	/*-----------------------------------------------------------------------
	* SYPCR - System Protection Control 11-9
	* SYPCR can only be written once after reset!
	*-----------------------------------------------------------------------
	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	*/
	#if defined(CONFIG_WATCHDOG)
	#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
	#else
	#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| SYPCR_SWP)
	#endif

	/*-----------------------------------------------------------------------
	* SIUMCR - SIU Module Configuration 11-6
	*-----------------------------------------------------------------------
	* PCMCIA config., multi-function pin tri-state
	*/
	/* 0x00000040 */
	#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 \| SIUMCR_DBPC00 \| SIUMCR_MLRC00 \| SIUMCR_GB5E)

	/*-----------------------------------------------------------------------
	* TBSCR - Time Base Status and Control 11-26
	*-----------------------------------------------------------------------
	* Clear Reference Interrupt Status, Timebase freezing enabled
	*/
	#define CONFIG_SYS_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBF)

	/*-----------------------------------------------------------------------
	* PISCR - Periodic Interrupt Status and Control 11-31
	*-----------------------------------------------------------------------
	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	*/
	#define CONFIG_SYS_PISCR (PISCR_PS \| PISCR_PITF)

	/*-----------------------------------------------------------------------
	* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
	*-----------------------------------------------------------------------
	* Reset PLL lock status sticky bit, timer expired status bit and timer
	* interrupt status bit, set PLL multiplication factor !
	*/
	/* 0x00b0c0c0 */
	#define CONFIG_SYS_PLPRCR \
	( (11 << PLPRCR_MF_SHIFT) \| \
	PLPRCR_SPLSS \| PLPRCR_TEXPS \| /PLPRCR_TMIST\|/ \
	/PLPRCR_CSRC\|/ PLPRCR_LPM_NORMAL \| \
	PLPRCR_CSR \| PLPRCR_LOLRE /\|PLPRCR_FIOPD/ \
	)

	/*-----------------------------------------------------------------------
	* SCCR - System Clock and reset Control Register 15-27
	*-----------------------------------------------------------------------
	* Set clock output, timebase and RTC source and divider,
	* power management and some other internal clocks
	*/
	#define SCCR_MASK SCCR_EBDF11
	/* 0x01800014 */
	#define CONFIG_SYS_SCCR (SCCR_COM00 \| /SCCR_TBS\|/ \
	SCCR_RTDIV \| SCCR_RTSEL \| \
	/SCCR_CRQEN\|/ /SCCR_PRQEN\|/ \
	SCCR_EBDF00 \| SCCR_DFSYNC00 \| \
	SCCR_DFBRG00 \| SCCR_DFNL000 \| \
	SCCR_DFNH000 \| SCCR_DFLCD101 \| \
	SCCR_DFALCD00)

	/*-----------------------------------------------------------------------
	* RTCSC - Real-Time Clock Status and Control Register
	*-----------------------------------------------------------------------
	*/
	/* 0x00C3 */
	#define CONFIG_SYS_RTCSC (RTCSC_SEC \| RTCSC_ALR \| RTCSC_RTF\| RTCSC_RTE)


	/*-----------------------------------------------------------------------
	* RCCR - RISC Controller Configuration Register
	*-----------------------------------------------------------------------
	*/
	/* TIMEP=2 */
	#define CONFIG_SYS_RCCR 0x0200

	/*-----------------------------------------------------------------------
	* RMDS - RISC Microcode Development Support Control Register
	*-----------------------------------------------------------------------
	*/
	#define CONFIG_SYS_RMDS 0

	/*-----------------------------------------------------------------------
	* SDSR - SDMA Status Register
	*-----------------------------------------------------------------------
	*/
	#define CONFIG_SYS_SDSR ((u_char)0x83)

	/*-----------------------------------------------------------------------
	* SDMR - SDMA Mask Register
	*-----------------------------------------------------------------------
	*/
	#define CONFIG_SYS_SDMR ((u_char)0x00)

	/*-----------------------------------------------------------------------
	*
	* Interrupt Levels
	*-----------------------------------------------------------------------
	*/
	#define CONFIG_SYS_CPM_INTERRUPT 13 /* SIU_LEVEL6 */

	/*-----------------------------------------------------------------------
	* PCMCIA stuff
	*-----------------------------------------------------------------------
	*
	*/
	#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
	#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
	#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
	#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
	#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
	#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
	#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
	#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )

	/*-----------------------------------------------------------------------
	* IDE/ATA stuff
	*-----------------------------------------------------------------------
	*/
	#define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */
	#define CONFIG_IDE_LED 1 /* LED for ide supported */
	#define CONFIG_IDE_RESET 1 /* reset for ide supported */

	#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */
	#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS2) / max. 2 drives per IDE bus */

	#define CONFIG_SYS_ATA_BASE_ADDR 0xFE100000
	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
	#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0C00

	#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
	#define CONFIG_SYS_ATA_REG_OFFSET 0x0080 /* Offset for normal register accesses */
	#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 /* Offset for alternate registers */

	/*-----------------------------------------------------------------------
	*
	*-----------------------------------------------------------------------
	*
	*/
	#define CONFIG_SYS_DER 0

	/*
	* Init Memory Controller:
	*
	* BR0/1 and OR0/1 (FLASH)
	*/

	#define FLASH_BASE0_PRELIM 0xFF000000 /* FLASH bank #0 */
	#define FLASH_BASE1_PRELIM 0xFF080000 /* FLASH bank #1 */

	/* used to re-map FLASH both when starting from SRAM or FLASH:
	* restrict access enough to keep SRAM working (if any)
	* but not too much to meddle with FLASH accesses
	*/
	/* EPROMs are 512kb */
	#define CONFIG_SYS_REMAP_OR_AM 0xFFF80000 /* OR addr mask */
	#define CONFIG_SYS_PRELIM_OR_AM 0xFFF80000 /* OR addr mask */

	/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
	#define CONFIG_SYS_OR_TIMING_FLASH (/* OR_CSNT_SAM \| */ OR_ACS_DIV4 \| OR_BI \| \
	OR_SCY_5_CLK \| OR_EHTR)

	#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM \| CONFIG_SYS_OR_TIMING_FLASH)
	#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM \| CONFIG_SYS_OR_TIMING_FLASH)
	/* 16 bit, bank valid */
	#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_PS_16 \| BR_V )

	#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
	#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
	/* 16 bit, bank valid */
	#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) \| BR_PS_16 \| BR_V )

	/*
	* BR2-5 and OR2-5 (SRAM/SDRAM/PER8/SHARC)
	*
	*/
	#define SRAM_BASE 0xFE200000 /* SRAM bank */
	#define SRAM_OR_AM 0xFFE00000 /* SRAM is 2 MB */

	#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank */
	#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */
	#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB SDRAM */

	#define PER8_BASE 0xFE000000 /* PER8 bank */
	#define PER8_OR_AM 0xFFF00000 /* PER8 is 1 MB */

	#define SHARC_BASE 0xFE400000 /* SHARC bank */
	#define SHARC_OR_AM 0xFFC00000 /* SHARC is 4 MB */

	/* SRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */

	#define CONFIG_SYS_OR_TIMING_SRAM 0x00000D42 /* SRAM-Timing */
	#define CONFIG_SYS_OR2 (SRAM_OR_AM \| CONFIG_SYS_OR_TIMING_SRAM )
	#define CONFIG_SYS_BR2 ((SRAM_BASE & BR_BA_MSK) \| BR_PS_16 \| BR_V )

	/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */

	#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 /* SDRAM-Timing */
	#define CONFIG_SYS_OR3_PRELIM (SDRAM_PRELIM_OR_AM \| CONFIG_SYS_OR_TIMING_SDRAM )
	#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) \| BR_MS_UPMB \| BR_V )

	#define CONFIG_SYS_OR_TIMING_PER8 0x00000F32 /* PER8-Timing */
	#define CONFIG_SYS_OR4 (PER8_OR_AM \| CONFIG_SYS_OR_TIMING_PER8 )
	#define CONFIG_SYS_BR4 ((PER8_BASE & BR_BA_MSK) \| BR_PS_8 \| BR_V )

	#define CONFIG_SYS_OR_TIMING_SHARC 0x00000700 /* SHARC-Timing */
	#define CONFIG_SYS_OR5 (SHARC_OR_AM \| CONFIG_SYS_OR_TIMING_SHARC )
	#define CONFIG_SYS_BR5 ((SHARC_BASE & BR_BA_MSK) \| BR_PS_32 \| BR_MS_UPMA \| BR_V )
	/*
	* Memory Periodic Timer Prescaler
	*/

	/* periodic timer for refresh */
	#define CONFIG_SYS_MBMR_PTB 204

	/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
	#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
	#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */

	/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
	#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
	#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */

	/*
	* MBMR settings for SDRAM
	*/

	/* 8 column SDRAM */
	#define CONFIG_SYS_MBMR_8COL ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) \| \
	MBMR_AMB_TYPE_0 \| MBMR_DSB_1_CYCL \| MBMR_G0CLB_A11 \| \
	MBMR_RLFB_1X \| MBMR_WLFB_1X \| MBMR_TLFB_4X)

	/*
	* Internal Definitions
	*
	* Boot Flags
	*/
	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	#endif /* __CONFIG_H */