| /* |
| * |
| * BRIEF MODULE DESCRIPTION |
| * Include file for Alchemy Semiconductor's Au1k CPU. |
| * |
| * Copyright 2000,2001 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. |
| * ppopov@mvista.com or source@mvista.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| /* |
| * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp |
| */ |
| |
| #ifndef _AU1X00_H_ |
| #define _AU1X00_H_ |
| |
| #ifndef __ASSEMBLY__ |
| /* cpu pipeline flush */ |
| void static inline au_sync(void) |
| { |
| __asm__ volatile ("sync"); |
| } |
| |
| void static inline au_sync_udelay(int us) |
| { |
| __asm__ volatile ("sync"); |
| udelay(us); |
| } |
| |
| void static inline au_writeb(u8 val, int reg) |
| { |
| *(volatile u8 *)(reg) = val; |
| } |
| |
| void static inline au_writew(u16 val, int reg) |
| { |
| *(volatile u16 *)(reg) = val; |
| } |
| |
| void static inline au_writel(u32 val, int reg) |
| { |
| *(volatile u32 *)(reg) = val; |
| } |
| |
| static inline u8 au_readb(unsigned long port) |
| { |
| return (*(volatile u8 *)port); |
| } |
| |
| static inline u16 au_readw(unsigned long port) |
| { |
| return (*(volatile u16 *)port); |
| } |
| |
| static inline u32 au_readl(unsigned long port) |
| { |
| return (*(volatile u32 *)port); |
| } |
| |
| /* These next three functions should be a generic part of the MIPS |
| * kernel (with the 'au_' removed from the name) and selected for |
| * processors that support the instructions. |
| * Taken from PPC tree. -- Dan |
| */ |
| /* Return the bit position of the most significant 1 bit in a word */ |
| static __inline__ int __ilog2(unsigned int x) |
| { |
| int lz; |
| |
| asm volatile ( |
| ".set\tnoreorder\n\t" |
| ".set\tnoat\n\t" |
| ".set\tmips32\n\t" |
| "clz\t%0,%1\n\t" |
| ".set\tmips0\n\t" |
| ".set\tat\n\t" |
| ".set\treorder" |
| : "=r" (lz) |
| : "r" (x)); |
| |
| return 31 - lz; |
| } |
| |
| static __inline__ int au_ffz(unsigned int x) |
| { |
| if ((x = ~x) == 0) |
| return 32; |
| return __ilog2(x & -x); |
| } |
| |
| /* |
| * ffs: find first bit set. This is defined the same way as |
| * the libc and compiler builtin ffs routines, therefore |
| * differs in spirit from the above ffz (man ffs). |
| */ |
| static __inline__ int au_ffs(int x) |
| { |
| return __ilog2(x & -x) + 1; |
| } |
| |
| #define gpio_set(Value) outl(Value, SYS_OUTPUTSET) |
| #define gpio_clear(Value) outl(Value, SYS_OUTPUTCLR) |
| #define gpio_read() inl(SYS_PINSTATERD) |
| #define gpio_tristate(Value) outl(Value, SYS_TRIOUTCLR) |
| |
| #endif /* !ASSEMBLY */ |
| |
| #ifdef CONFIG_PM |
| /* no CP0 timer irq */ |
| #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) |
| #else |
| #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) |
| #endif |
| |
| #define CP0_IWATCHLO $18,1 |
| #define CP0_DEBUG $23 |
| |
| /* SDRAM Controller */ |
| #ifdef CONFIG_AU1550 |
| |
| #define MEM_SDMODE0 0xB4000800 |
| #define MEM_SDMODE1 0xB4000808 |
| #define MEM_SDMODE2 0xB4000810 |
| |
| #define MEM_SDADDR0 0xB4000820 |
| #define MEM_SDADDR1 0xB4000828 |
| #define MEM_SDADDR2 0xB4000830 |
| |
| #define MEM_SDCONFIGA 0xB4000840 |
| #define MEM_SDCONFIGB 0xB4000848 |
| #define MEM_SDPRECMD 0xB40008c0 |
| #define MEM_SDAUTOREF 0xB40008c8 |
| |
| #define MEM_SDWRMD0 0xB4000880 |
| #define MEM_SDWRMD1 0xB4000888 |
| #define MEM_SDWRMD2 0xB4000890 |
| |
| #else /* CONFIG_AU1550 */ |
| |
| #define MEM_SDMODE0 0xB4000000 |
| #define MEM_SDMODE1 0xB4000004 |
| #define MEM_SDMODE2 0xB4000008 |
| |
| #define MEM_SDADDR0 0xB400000C |
| #define MEM_SDADDR1 0xB4000010 |
| #define MEM_SDADDR2 0xB4000014 |
| |
| #define MEM_SDREFCFG 0xB4000018 |
| #define MEM_SDPRECMD 0xB400001C |
| #define MEM_SDAUTOREF 0xB4000020 |
| |
| #define MEM_SDWRMD0 0xB4000024 |
| #define MEM_SDWRMD1 0xB4000028 |
| #define MEM_SDWRMD2 0xB400002C |
| |
| #endif /* CONFIG_AU1550 */ |
| |
| #define MEM_SDSLEEP 0xB4000030 |
| #define MEM_SDSMCKE 0xB4000034 |
| |
| /* Static Bus Controller */ |
| #define MEM_STCFG0 0xB4001000 |
| #define MEM_STTIME0 0xB4001004 |
| #define MEM_STADDR0 0xB4001008 |
| |
| #define MEM_STCFG1 0xB4001010 |
| #define MEM_STTIME1 0xB4001014 |
| #define MEM_STADDR1 0xB4001018 |
| |
| #define MEM_STCFG2 0xB4001020 |
| #define MEM_STTIME2 0xB4001024 |
| #define MEM_STADDR2 0xB4001028 |
| |
| #define MEM_STCFG3 0xB4001030 |
| #define MEM_STTIME3 0xB4001034 |
| #define MEM_STADDR3 0xB4001038 |
| |
| /* Interrupt Controller 0 */ |
| #define IC0_CFG0RD 0xB0400040 |
| #define IC0_CFG0SET 0xB0400040 |
| #define IC0_CFG0CLR 0xB0400044 |
| |
| #define IC0_CFG1RD 0xB0400048 |
| #define IC0_CFG1SET 0xB0400048 |
| #define IC0_CFG1CLR 0xB040004C |
| |
| #define IC0_CFG2RD 0xB0400050 |
| #define IC0_CFG2SET 0xB0400050 |
| #define IC0_CFG2CLR 0xB0400054 |
| |
| #define IC0_REQ0INT 0xB0400054 |
| #define IC0_SRCRD 0xB0400058 |
| #define IC0_SRCSET 0xB0400058 |
| #define IC0_SRCCLR 0xB040005C |
| #define IC0_REQ1INT 0xB040005C |
| |
| #define IC0_ASSIGNRD 0xB0400060 |
| #define IC0_ASSIGNSET 0xB0400060 |
| #define IC0_ASSIGNCLR 0xB0400064 |
| |
| #define IC0_WAKERD 0xB0400068 |
| #define IC0_WAKESET 0xB0400068 |
| #define IC0_WAKECLR 0xB040006C |
| |
| #define IC0_MASKRD 0xB0400070 |
| #define IC0_MASKSET 0xB0400070 |
| #define IC0_MASKCLR 0xB0400074 |
| |
| #define IC0_RISINGRD 0xB0400078 |
| #define IC0_RISINGCLR 0xB0400078 |
| #define IC0_FALLINGRD 0xB040007C |
| #define IC0_FALLINGCLR 0xB040007C |
| |
| #define IC0_TESTBIT 0xB0400080 |
| |
| /* Interrupt Controller 1 */ |
| #define IC1_CFG0RD 0xB1800040 |
| #define IC1_CFG0SET 0xB1800040 |
| #define IC1_CFG0CLR 0xB1800044 |
| |
| #define IC1_CFG1RD 0xB1800048 |
| #define IC1_CFG1SET 0xB1800048 |
| #define IC1_CFG1CLR 0xB180004C |
| |
| #define IC1_CFG2RD 0xB1800050 |
| #define IC1_CFG2SET 0xB1800050 |
| #define IC1_CFG2CLR 0xB1800054 |
| |
| #define IC1_REQ0INT 0xB1800054 |
| #define IC1_SRCRD 0xB1800058 |
| #define IC1_SRCSET 0xB1800058 |
| #define IC1_SRCCLR 0xB180005C |
| #define IC1_REQ1INT 0xB180005C |
| |
| #define IC1_ASSIGNRD 0xB1800060 |
| #define IC1_ASSIGNSET 0xB1800060 |
| #define IC1_ASSIGNCLR 0xB1800064 |
| |
| #define IC1_WAKERD 0xB1800068 |
| #define IC1_WAKESET 0xB1800068 |
| #define IC1_WAKECLR 0xB180006C |
| |
| #define IC1_MASKRD 0xB1800070 |
| #define IC1_MASKSET 0xB1800070 |
| #define IC1_MASKCLR 0xB1800074 |
| |
| #define IC1_RISINGRD 0xB1800078 |
| #define IC1_RISINGCLR 0xB1800078 |
| #define IC1_FALLINGRD 0xB180007C |
| #define IC1_FALLINGCLR 0xB180007C |
| |
| #define IC1_TESTBIT 0xB1800080 |
| |
| /* Interrupt Configuration Modes */ |
| #define INTC_INT_DISABLED 0 |
| #define INTC_INT_RISE_EDGE 0x1 |
| #define INTC_INT_FALL_EDGE 0x2 |
| #define INTC_INT_RISE_AND_FALL_EDGE 0x3 |
| #define INTC_INT_HIGH_LEVEL 0x5 |
| #define INTC_INT_LOW_LEVEL 0x6 |
| #define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 |
| |
| /* Interrupt Numbers */ |
| #define AU1X00_UART0_INT 0 |
| #define AU1000_UART1_INT 1 /* au1000 */ |
| #define AU1000_UART2_INT 2 /* au1000 */ |
| |
| #define AU1500_PCI_INTA 1 /* au1500 */ |
| #define AU1500_PCI_INTB 2 /* au1500 */ |
| |
| #define AU1X00_UART3_INT 3 |
| |
| #define AU1000_SSI0_INT 4 /* au1000 */ |
| #define AU1000_SSI1_INT 5 /* au1000 */ |
| |
| #define AU1500_PCI_INTC 4 /* au1500 */ |
| #define AU1500_PCI_INTD 5 /* au1500 */ |
| |
| #define AU1X00_DMA_INT_BASE 6 |
| #define AU1X00_TOY_INT 14 |
| #define AU1X00_TOY_MATCH0_INT 15 |
| #define AU1X00_TOY_MATCH1_INT 16 |
| #define AU1X00_TOY_MATCH2_INT 17 |
| #define AU1X00_RTC_INT 18 |
| #define AU1X00_RTC_MATCH0_INT 19 |
| #define AU1X00_RTC_MATCH1_INT 20 |
| #define AU1X00_RTC_MATCH2_INT 21 |
| #define AU1000_IRDA_TX_INT 22 /* au1000 */ |
| #define AU1000_IRDA_RX_INT 23 /* au1000 */ |
| #define AU1X00_USB_DEV_REQ_INT 24 |
| #define AU1X00_USB_DEV_SUS_INT 25 |
| #define AU1X00_USB_HOST_INT 26 |
| #define AU1X00_ACSYNC_INT 27 |
| #define AU1X00_MAC0_DMA_INT 28 |
| #define AU1X00_MAC1_DMA_INT 29 |
| #define AU1X00_ETH0_IRQ AU1X00_MAC0_DMA_INT |
| #define AU1X00_ETH1_IRQ AU1X00_MAC1_DMA_INT |
| #define AU1000_I2S_UO_INT 30 /* au1000 */ |
| #define AU1X00_AC97C_INT 31 |
| #define AU1X00_LAST_INTC0_INT AU1X00_AC97C_INT |
| #define AU1X00_GPIO_0 32 |
| #define AU1X00_GPIO_1 33 |
| #define AU1X00_GPIO_2 34 |
| #define AU1X00_GPIO_3 35 |
| #define AU1X00_GPIO_4 36 |
| #define AU1X00_GPIO_5 37 |
| #define AU1X00_GPIO_6 38 |
| #define AU1X00_GPIO_7 39 |
| #define AU1X00_GPIO_8 40 |
| #define AU1X00_GPIO_9 41 |
| #define AU1X00_GPIO_10 42 |
| #define AU1X00_GPIO_11 43 |
| #define AU1X00_GPIO_12 44 |
| #define AU1X00_GPIO_13 45 |
| #define AU1X00_GPIO_14 46 |
| #define AU1X00_GPIO_15 47 |
| |
| /* Au1000 only */ |
| #define AU1000_GPIO_16 48 |
| #define AU1000_GPIO_17 49 |
| #define AU1000_GPIO_18 50 |
| #define AU1000_GPIO_19 51 |
| #define AU1000_GPIO_20 52 |
| #define AU1000_GPIO_21 53 |
| #define AU1000_GPIO_22 54 |
| #define AU1000_GPIO_23 55 |
| #define AU1000_GPIO_24 56 |
| #define AU1000_GPIO_25 57 |
| #define AU1000_GPIO_26 58 |
| #define AU1000_GPIO_27 59 |
| #define AU1000_GPIO_28 60 |
| #define AU1000_GPIO_29 61 |
| #define AU1000_GPIO_30 62 |
| #define AU1000_GPIO_31 63 |
| |
| /* Au1500 only */ |
| #define AU1500_GPIO_200 48 |
| #define AU1500_GPIO_201 49 |
| #define AU1500_GPIO_202 50 |
| #define AU1500_GPIO_203 51 |
| #define AU1500_GPIO_20 52 |
| #define AU1500_GPIO_204 53 |
| #define AU1500_GPIO_205 54 |
| #define AU1500_GPIO_23 55 |
| #define AU1500_GPIO_24 56 |
| #define AU1500_GPIO_25 57 |
| #define AU1500_GPIO_26 58 |
| #define AU1500_GPIO_27 59 |
| #define AU1500_GPIO_28 60 |
| #define AU1500_GPIO_206 61 |
| #define AU1500_GPIO_207 62 |
| #define AU1500_GPIO_208_215 63 |
| |
| #define AU1X00_MAX_INTR 63 |
| |
| #define AU1100_SD 2 |
| #define AU1100_GPIO_208_215 29 |
| /* REDEFINE SECONDARY GPIO BLOCK INTO IC1 CONTROLLER HERE */ |
| |
| /* Programmable Counters 0 and 1 */ |
| #define SYS_BASE 0xB1900000 |
| #define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) |
| #define SYS_CNTRL_E1S (1<<23) |
| #define SYS_CNTRL_T1S (1<<20) |
| #define SYS_CNTRL_M21 (1<<19) |
| #define SYS_CNTRL_M11 (1<<18) |
| #define SYS_CNTRL_M01 (1<<17) |
| #define SYS_CNTRL_C1S (1<<16) |
| #define SYS_CNTRL_BP (1<<14) |
| #define SYS_CNTRL_EN1 (1<<13) |
| #define SYS_CNTRL_BT1 (1<<12) |
| #define SYS_CNTRL_EN0 (1<<11) |
| #define SYS_CNTRL_BT0 (1<<10) |
| #define SYS_CNTRL_E0 (1<<8) |
| #define SYS_CNTRL_E0S (1<<7) |
| #define SYS_CNTRL_32S (1<<5) |
| #define SYS_CNTRL_T0S (1<<4) |
| #define SYS_CNTRL_M20 (1<<3) |
| #define SYS_CNTRL_M10 (1<<2) |
| #define SYS_CNTRL_M00 (1<<1) |
| #define SYS_CNTRL_C0S (1<<0) |
| |
| /* Programmable Counter 0 Registers */ |
| #define SYS_TOYTRIM (SYS_BASE + 0) |
| #define SYS_TOYWRITE (SYS_BASE + 4) |
| #define SYS_TOYMATCH0 (SYS_BASE + 8) |
| #define SYS_TOYMATCH1 (SYS_BASE + 0xC) |
| #define SYS_TOYMATCH2 (SYS_BASE + 0x10) |
| #define SYS_TOYREAD (SYS_BASE + 0x40) |
| |
| /* Programmable Counter 1 Registers */ |
| #define SYS_RTCTRIM (SYS_BASE + 0x44) |
| #define SYS_RTCWRITE (SYS_BASE + 0x48) |
| #define SYS_RTCMATCH0 (SYS_BASE + 0x4C) |
| #define SYS_RTCMATCH1 (SYS_BASE + 0x50) |
| #define SYS_RTCMATCH2 (SYS_BASE + 0x54) |
| #define SYS_RTCREAD (SYS_BASE + 0x58) |
| |
| /* I2S Controller */ |
| #define I2S_DATA 0xB1000000 |
| #define I2S_DATA_MASK (0xffffff) |
| #define I2S_CONFIG 0xB1000004 |
| #define I2S_CONFIG_XU (1<<25) |
| #define I2S_CONFIG_XO (1<<24) |
| #define I2S_CONFIG_RU (1<<23) |
| #define I2S_CONFIG_RO (1<<22) |
| #define I2S_CONFIG_TR (1<<21) |
| #define I2S_CONFIG_TE (1<<20) |
| #define I2S_CONFIG_TF (1<<19) |
| #define I2S_CONFIG_RR (1<<18) |
| #define I2S_CONFIG_RE (1<<17) |
| #define I2S_CONFIG_RF (1<<16) |
| #define I2S_CONFIG_PD (1<<11) |
| #define I2S_CONFIG_LB (1<<10) |
| #define I2S_CONFIG_IC (1<<9) |
| #define I2S_CONFIG_FM_BIT 7 |
| #define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) |
| #define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) |
| #define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) |
| #define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) |
| #define I2S_CONFIG_TN (1<<6) |
| #define I2S_CONFIG_RN (1<<5) |
| #define I2S_CONFIG_SZ_BIT 0 |
| #define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) |
| |
| #define I2S_CONTROL 0xB1000008 |
| #define I2S_CONTROL_D (1<<1) |
| #define I2S_CONTROL_CE (1<<0) |
| |
| /* USB Host Controller */ |
| /* We pass USB_OHCI_BASE to ioremap, so it needs to be a physical address */ |
| #define USB_OHCI_BASE 0x10100000 |
| #define USB_OHCI_LEN 0x00100000 |
| #define USB_HOST_CONFIG 0xB017fffc |
| |
| /* USB Device Controller */ |
| #define USBD_EP0RD 0xB0200000 |
| #define USBD_EP0WR 0xB0200004 |
| #define USBD_EP2WR 0xB0200008 |
| #define USBD_EP3WR 0xB020000C |
| #define USBD_EP4RD 0xB0200010 |
| #define USBD_EP5RD 0xB0200014 |
| #define USBD_INTEN 0xB0200018 |
| #define USBD_INTSTAT 0xB020001C |
| #define USBDEV_INT_SOF (1<<12) |
| #define USBDEV_INT_HF_BIT 6 |
| #define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT) |
| #define USBDEV_INT_CMPLT_BIT 0 |
| #define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT) |
| #define USBD_CONFIG 0xB0200020 |
| #define USBD_EP0CS 0xB0200024 |
| #define USBD_EP2CS 0xB0200028 |
| #define USBD_EP3CS 0xB020002C |
| #define USBD_EP4CS 0xB0200030 |
| #define USBD_EP5CS 0xB0200034 |
| #define USBDEV_CS_SU (1<<14) |
| #define USBDEV_CS_NAK (1<<13) |
| #define USBDEV_CS_ACK (1<<12) |
| #define USBDEV_CS_BUSY (1<<11) |
| #define USBDEV_CS_TSIZE_BIT 1 |
| #define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) |
| #define USBDEV_CS_STALL (1<<0) |
| #define USBD_EP0RDSTAT 0xB0200040 |
| #define USBD_EP0WRSTAT 0xB0200044 |
| #define USBD_EP2WRSTAT 0xB0200048 |
| #define USBD_EP3WRSTAT 0xB020004C |
| #define USBD_EP4RDSTAT 0xB0200050 |
| #define USBD_EP5RDSTAT 0xB0200054 |
| #define USBDEV_FSTAT_FLUSH (1<<6) |
| #define USBDEV_FSTAT_UF (1<<5) |
| #define USBDEV_FSTAT_OF (1<<4) |
| #define USBDEV_FSTAT_FCNT_BIT 0 |
| #define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT) |
| #define USBD_ENABLE 0xB0200058 |
| #define USBDEV_ENABLE (1<<1) |
| #define USBDEV_CE (1<<0) |
| |
| /* Ethernet Controllers */ |
| #define AU1000_ETH0_BASE 0xB0500000 |
| #define AU1000_ETH1_BASE 0xB0510000 |
| #define AU1500_ETH0_BASE 0xB1500000 |
| #define AU1500_ETH1_BASE 0xB1510000 |
| #define AU1100_ETH0_BASE 0xB0500000 |
| #define AU1550_ETH0_BASE 0xB0500000 |
| #define AU1550_ETH1_BASE 0xB0510000 |
| |
| /* 4 byte offsets from AU1000_ETH_BASE */ |
| #define MAC_CONTROL 0x0 |
| #define MAC_RX_ENABLE (1<<2) |
| #define MAC_TX_ENABLE (1<<3) |
| #define MAC_DEF_CHECK (1<<5) |
| #define MAC_SET_BL(X) (((X)&0x3)<<6) |
| #define MAC_AUTO_PAD (1<<8) |
| #define MAC_DISABLE_RETRY (1<<10) |
| #define MAC_DISABLE_BCAST (1<<11) |
| #define MAC_LATE_COL (1<<12) |
| #define MAC_HASH_MODE (1<<13) |
| #define MAC_HASH_ONLY (1<<15) |
| #define MAC_PASS_ALL (1<<16) |
| #define MAC_INVERSE_FILTER (1<<17) |
| #define MAC_PROMISCUOUS (1<<18) |
| #define MAC_PASS_ALL_MULTI (1<<19) |
| #define MAC_FULL_DUPLEX (1<<20) |
| #define MAC_NORMAL_MODE 0 |
| #define MAC_INT_LOOPBACK (1<<21) |
| #define MAC_EXT_LOOPBACK (1<<22) |
| #define MAC_DISABLE_RX_OWN (1<<23) |
| #define MAC_BIG_ENDIAN (1<<30) |
| #define MAC_RX_ALL (1<<31) |
| #define MAC_ADDRESS_HIGH 0x4 |
| #define MAC_ADDRESS_LOW 0x8 |
| #define MAC_MCAST_HIGH 0xC |
| #define MAC_MCAST_LOW 0x10 |
| #define MAC_MII_CNTRL 0x14 |
| #define MAC_MII_BUSY (1<<0) |
| #define MAC_MII_READ 0 |
| #define MAC_MII_WRITE (1<<1) |
| #define MAC_SET_MII_SELECT_REG(X) (((X)&0x1f)<<6) |
| #define MAC_SET_MII_SELECT_PHY(X) (((X)&0x1f)<<11) |
| #define MAC_MII_DATA 0x18 |
| #define MAC_FLOW_CNTRL 0x1C |
| #define MAC_FLOW_CNTRL_BUSY (1<<0) |
| #define MAC_FLOW_CNTRL_ENABLE (1<<1) |
| #define MAC_PASS_CONTROL (1<<2) |
| #define MAC_SET_PAUSE(X) (((X)&0xffff)<<16) |
| #define MAC_VLAN1_TAG 0x20 |
| #define MAC_VLAN2_TAG 0x24 |
| |
| /* Ethernet Controller Enable */ |
| #define AU1000_MAC0_ENABLE 0xB0520000 |
| #define AU1000_MAC1_ENABLE 0xB0520004 |
| #define AU1500_MAC0_ENABLE 0xB1520000 |
| #define AU1500_MAC1_ENABLE 0xB1520004 |
| #define AU1100_MAC0_ENABLE 0xB0520000 |
| #define AU1550_MAC0_ENABLE 0xB0520000 |
| #define AU1550_MAC1_ENABLE 0xB0520004 |
| |
| #define MAC_EN_CLOCK_ENABLE (1<<0) |
| #define MAC_EN_RESET0 (1<<1) |
| #define MAC_EN_TOSS (0<<2) |
| #define MAC_EN_CACHEABLE (1<<3) |
| #define MAC_EN_RESET1 (1<<4) |
| #define MAC_EN_RESET2 (1<<5) |
| #define MAC_DMA_RESET (1<<6) |
| |
| /* Ethernet Controller DMA Channels */ |
| |
| #define MAC0_TX_DMA_ADDR 0xB4004000 |
| #define MAC1_TX_DMA_ADDR 0xB4004200 |
| /* offsets from MAC_TX_RING_ADDR address */ |
| #define MAC_TX_BUFF0_STATUS 0x0 |
| #define TX_FRAME_ABORTED (1<<0) |
| #define TX_JAB_TIMEOUT (1<<1) |
| #define TX_NO_CARRIER (1<<2) |
| #define TX_LOSS_CARRIER (1<<3) |
| #define TX_EXC_DEF (1<<4) |
| #define TX_LATE_COLL_ABORT (1<<5) |
| #define TX_EXC_COLL (1<<6) |
| #define TX_UNDERRUN (1<<7) |
| #define TX_DEFERRED (1<<8) |
| #define TX_LATE_COLL (1<<9) |
| #define TX_COLL_CNT_MASK (0xF<<10) |
| #define TX_PKT_RETRY (1<<31) |
| #define MAC_TX_BUFF0_ADDR 0x4 |
| #define TX_DMA_ENABLE (1<<0) |
| #define TX_T_DONE (1<<1) |
| #define TX_GET_DMA_BUFFER(X) (((X)>>2)&0x3) |
| #define MAC_TX_BUFF0_LEN 0x8 |
| #define MAC_TX_BUFF1_STATUS 0x10 |
| #define MAC_TX_BUFF1_ADDR 0x14 |
| #define MAC_TX_BUFF1_LEN 0x18 |
| #define MAC_TX_BUFF2_STATUS 0x20 |
| #define MAC_TX_BUFF2_ADDR 0x24 |
| #define MAC_TX_BUFF2_LEN 0x28 |
| #define MAC_TX_BUFF3_STATUS 0x30 |
| #define MAC_TX_BUFF3_ADDR 0x34 |
| #define MAC_TX_BUFF3_LEN 0x38 |
| |
| #define MAC0_RX_DMA_ADDR 0xB4004100 |
| #define MAC1_RX_DMA_ADDR 0xB4004300 |
| /* offsets from MAC_RX_RING_ADDR */ |
| #define MAC_RX_BUFF0_STATUS 0x0 |
| #define RX_FRAME_LEN_MASK 0x3fff |
| #define RX_WDOG_TIMER (1<<14) |
| #define RX_RUNT (1<<15) |
| #define RX_OVERLEN (1<<16) |
| #define RX_COLL (1<<17) |
| #define RX_ETHER (1<<18) |
| #define RX_MII_ERROR (1<<19) |
| #define RX_DRIBBLING (1<<20) |
| #define RX_CRC_ERROR (1<<21) |
| #define RX_VLAN1 (1<<22) |
| #define RX_VLAN2 (1<<23) |
| #define RX_LEN_ERROR (1<<24) |
| #define RX_CNTRL_FRAME (1<<25) |
| #define RX_U_CNTRL_FRAME (1<<26) |
| #define RX_MCAST_FRAME (1<<27) |
| #define RX_BCAST_FRAME (1<<28) |
| #define RX_FILTER_FAIL (1<<29) |
| #define RX_PACKET_FILTER (1<<30) |
| #define RX_MISSED_FRAME (1<<31) |
| |
| #define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \ |
| RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ |
| RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) |
| #define MAC_RX_BUFF0_ADDR 0x4 |
| #define RX_DMA_ENABLE (1<<0) |
| #define RX_T_DONE (1<<1) |
| #define RX_GET_DMA_BUFFER(X) (((X)>>2)&0x3) |
| #define RX_SET_BUFF_ADDR(X) ((X)&0xffffffc0) |
| #define MAC_RX_BUFF1_STATUS 0x10 |
| #define MAC_RX_BUFF1_ADDR 0x14 |
| #define MAC_RX_BUFF2_STATUS 0x20 |
| #define MAC_RX_BUFF2_ADDR 0x24 |
| #define MAC_RX_BUFF3_STATUS 0x30 |
| #define MAC_RX_BUFF3_ADDR 0x34 |
| |
| |
| /* UARTS 0-3 */ |
| #define UART0_ADDR 0xB1100000 |
| #define UART1_ADDR 0xB1200000 |
| #define UART2_ADDR 0xB1300000 |
| #define UART3_ADDR 0xB1400000 |
| #define UART_BASE UART0_ADDR |
| #define UART_DEBUG_BASE UART2_ADDR |
| |
| #define UART_RX 0 /* Receive buffer */ |
| #define UART_TX 4 /* Transmit buffer */ |
| #define UART_IER 8 /* Interrupt Enable Register */ |
| #define UART_IIR 0xC /* Interrupt ID Register */ |
| #define UART_FCR 0x10 /* FIFO Control Register */ |
| #define UART_LCR 0x14 /* Line Control Register */ |
| #define UART_MCR 0x18 /* Modem Control Register */ |
| #define UART_LSR 0x1C /* Line Status Register */ |
| #define UART_MSR 0x20 /* Modem Status Register */ |
| #define UART_CLK 0x28 /* Baud Rate Clock Divider */ |
| #define UART_ENABLE 0x100 /* Uart enable */ |
| |
| #define UART_EN_CE 1 /* Clock enable */ |
| #define UART_EN_E 2 /* Enable */ |
| |
| #define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ |
| #define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ |
| #define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ |
| #define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ |
| #define UART_FCR_TRIGGER_MASK 0xF0 /* Mask for the FIFO trigger range */ |
| #define UART_FCR_R_TRIGGER_1 0x00 /* Mask for receive trigger set at 1 */ |
| #define UART_FCR_R_TRIGGER_4 0x40 /* Mask for receive trigger set at 4 */ |
| #define UART_FCR_R_TRIGGER_8 0x80 /* Mask for receive trigger set at 8 */ |
| #define UART_FCR_R_TRIGGER_14 0xA0 /* Mask for receive trigger set at 14 */ |
| #define UART_FCR_T_TRIGGER_0 0x00 /* Mask for transmit trigger set at 0 */ |
| #define UART_FCR_T_TRIGGER_4 0x10 /* Mask for transmit trigger set at 4 */ |
| #define UART_FCR_T_TRIGGER_8 0x20 /* Mask for transmit trigger set at 8 */ |
| #define UART_FCR_T_TRIGGER_12 0x30 /* Mask for transmit trigger set at 12 */ |
| |
| /* |
| * These are the definitions for the Line Control Register |
| */ |
| #define UART_LCR_SBC 0x40 /* Set break control */ |
| #define UART_LCR_SPAR 0x20 /* Stick parity (?) */ |
| #define UART_LCR_EPAR 0x10 /* Even parity select */ |
| #define UART_LCR_PARITY 0x08 /* Parity Enable */ |
| #define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ |
| #define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ |
| #define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ |
| #define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ |
| #define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ |
| |
| /* |
| * These are the definitions for the Line Status Register |
| */ |
| #define UART_LSR_TEMT 0x40 /* Transmitter empty */ |
| #define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ |
| #define UART_LSR_BI 0x10 /* Break interrupt indicator */ |
| #define UART_LSR_FE 0x08 /* Frame error indicator */ |
| #define UART_LSR_PE 0x04 /* Parity error indicator */ |
| #define UART_LSR_OE 0x02 /* Overrun error indicator */ |
| #define UART_LSR_DR 0x01 /* Receiver data ready */ |
| |
| /* |
| * These are the definitions for the Interrupt Identification Register |
| */ |
| #define UART_IIR_NO_INT 0x01 /* No interrupts pending */ |
| #define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ |
| #define UART_IIR_MSI 0x00 /* Modem status interrupt */ |
| #define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ |
| #define UART_IIR_RDI 0x04 /* Receiver data interrupt */ |
| #define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ |
| |
| /* |
| * These are the definitions for the Interrupt Enable Register |
| */ |
| #define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ |
| #define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ |
| #define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ |
| #define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ |
| |
| /* |
| * These are the definitions for the Modem Control Register |
| */ |
| #define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ |
| #define UART_MCR_OUT2 0x08 /* Out2 complement */ |
| #define UART_MCR_OUT1 0x04 /* Out1 complement */ |
| #define UART_MCR_RTS 0x02 /* RTS complement */ |
| #define UART_MCR_DTR 0x01 /* DTR complement */ |
| |
| /* |
| * These are the definitions for the Modem Status Register |
| */ |
| #define UART_MSR_DCD 0x80 /* Data Carrier Detect */ |
| #define UART_MSR_RI 0x40 /* Ring Indicator */ |
| #define UART_MSR_DSR 0x20 /* Data Set Ready */ |
| #define UART_MSR_CTS 0x10 /* Clear to Send */ |
| #define UART_MSR_DDCD 0x08 /* Delta DCD */ |
| #define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ |
| #define UART_MSR_DDSR 0x02 /* Delta DSR */ |
| #define UART_MSR_DCTS 0x01 /* Delta CTS */ |
| #define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ |
| |
| |
| /* SSIO */ |
| #define SSI0_STATUS 0xB1600000 |
| #define SSI_STATUS_BF (1<<4) |
| #define SSI_STATUS_OF (1<<3) |
| #define SSI_STATUS_UF (1<<2) |
| #define SSI_STATUS_D (1<<1) |
| #define SSI_STATUS_B (1<<0) |
| #define SSI0_INT 0xB1600004 |
| #define SSI_INT_OI (1<<3) |
| #define SSI_INT_UI (1<<2) |
| #define SSI_INT_DI (1<<1) |
| #define SSI0_INT_ENABLE 0xB1600008 |
| #define SSI_INTE_OIE (1<<3) |
| #define SSI_INTE_UIE (1<<2) |
| #define SSI_INTE_DIE (1<<1) |
| #define SSI0_CONFIG 0xB1600020 |
| #define SSI_CONFIG_AO (1<<24) |
| #define SSI_CONFIG_DO (1<<23) |
| #define SSI_CONFIG_ALEN_BIT 20 |
| #define SSI_CONFIG_ALEN_MASK (0x7<<20) |
| #define SSI_CONFIG_DLEN_BIT 16 |
| #define SSI_CONFIG_DLEN_MASK (0x7<<16) |
| #define SSI_CONFIG_DD (1<<11) |
| #define SSI_CONFIG_AD (1<<10) |
| #define SSI_CONFIG_BM_BIT 8 |
| #define SSI_CONFIG_BM_MASK (0x3<<8) |
| #define SSI_CONFIG_CE (1<<7) |
| #define SSI_CONFIG_DP (1<<6) |
| #define SSI_CONFIG_DL (1<<5) |
| #define SSI_CONFIG_EP (1<<4) |
| #define SSI0_ADATA 0xB1600024 |
| #define SSI_AD_D (1<<24) |
| #define SSI_AD_ADDR_BIT 16 |
| #define SSI_AD_ADDR_MASK (0xff<<16) |
| #define SSI_AD_DATA_BIT 0 |
| #define SSI_AD_DATA_MASK (0xfff<<0) |
| #define SSI0_CLKDIV 0xB1600028 |
| #define SSI0_CONTROL 0xB1600100 |
| #define SSI_CONTROL_CD (1<<1) |
| #define SSI_CONTROL_E (1<<0) |
| |
| /* SSI1 */ |
| #define SSI1_STATUS 0xB1680000 |
| #define SSI1_INT 0xB1680004 |
| #define SSI1_INT_ENABLE 0xB1680008 |
| #define SSI1_CONFIG 0xB1680020 |
| #define SSI1_ADATA 0xB1680024 |
| #define SSI1_CLKDIV 0xB1680028 |
| #define SSI1_ENABLE 0xB1680100 |
| |
| /* |
| * Register content definitions |
| */ |
| #define SSI_STATUS_BF (1<<4) |
| #define SSI_STATUS_OF (1<<3) |
| #define SSI_STATUS_UF (1<<2) |
| #define SSI_STATUS_D (1<<1) |
| #define SSI_STATUS_B (1<<0) |
| |
| /* SSI_INT */ |
| #define SSI_INT_OI (1<<3) |
| #define SSI_INT_UI (1<<2) |
| #define SSI_INT_DI (1<<1) |
| |
| /* SSI_INTEN */ |
| #define SSI_INTEN_OIE (1<<3) |
| #define SSI_INTEN_UIE (1<<2) |
| #define SSI_INTEN_DIE (1<<1) |
| |
| #define SSI_CONFIG_AO (1<<24) |
| #define SSI_CONFIG_DO (1<<23) |
| #define SSI_CONFIG_ALEN (7<<20) |
| #define SSI_CONFIG_DLEN (15<<16) |
| #define SSI_CONFIG_DD (1<<11) |
| #define SSI_CONFIG_AD (1<<10) |
| #define SSI_CONFIG_BM (3<<8) |
| #define SSI_CONFIG_CE (1<<7) |
| #define SSI_CONFIG_DP (1<<6) |
| #define SSI_CONFIG_DL (1<<5) |
| #define SSI_CONFIG_EP (1<<4) |
| #define SSI_CONFIG_ALEN_N(N) ((N-1)<<20) |
| #define SSI_CONFIG_DLEN_N(N) ((N-1)<<16) |
| #define SSI_CONFIG_BM_HI (0<<8) |
| #define SSI_CONFIG_BM_LO (1<<8) |
| #define SSI_CONFIG_BM_CY (2<<8) |
| |
| #define SSI_ADATA_D (1<<24) |
| #define SSI_ADATA_ADDR (0xFF<<16) |
| #define SSI_ADATA_DATA (0x0FFF) |
| #define SSI_ADATA_ADDR_N(N) (N<<16) |
| |
| #define SSI_ENABLE_CD (1<<1) |
| #define SSI_ENABLE_E (1<<0) |
| |
| |
| /* IrDA Controller */ |
| #define IRDA_BASE 0xB0300000 |
| #define IR_RING_PTR_STATUS (IRDA_BASE+0x00) |
| #define IR_RING_BASE_ADDR_H (IRDA_BASE+0x04) |
| #define IR_RING_BASE_ADDR_L (IRDA_BASE+0x08) |
| #define IR_RING_SIZE (IRDA_BASE+0x0C) |
| #define IR_RING_PROMPT (IRDA_BASE+0x10) |
| #define IR_RING_ADDR_CMPR (IRDA_BASE+0x14) |
| #define IR_INT_CLEAR (IRDA_BASE+0x18) |
| #define IR_CONFIG_1 (IRDA_BASE+0x20) |
| #define IR_RX_INVERT_LED (1<<0) |
| #define IR_TX_INVERT_LED (1<<1) |
| #define IR_ST (1<<2) |
| #define IR_SF (1<<3) |
| #define IR_SIR (1<<4) |
| #define IR_MIR (1<<5) |
| #define IR_FIR (1<<6) |
| #define IR_16CRC (1<<7) |
| #define IR_TD (1<<8) |
| #define IR_RX_ALL (1<<9) |
| #define IR_DMA_ENABLE (1<<10) |
| #define IR_RX_ENABLE (1<<11) |
| #define IR_TX_ENABLE (1<<12) |
| #define IR_LOOPBACK (1<<14) |
| #define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ |
| IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) |
| #define IR_SIR_FLAGS (IRDA_BASE+0x24) |
| #define IR_ENABLE (IRDA_BASE+0x28) |
| #define IR_RX_STATUS (1<<9) |
| #define IR_TX_STATUS (1<<10) |
| #define IR_READ_PHY_CONFIG (IRDA_BASE+0x2C) |
| #define IR_WRITE_PHY_CONFIG (IRDA_BASE+0x30) |
| #define IR_MAX_PKT_LEN (IRDA_BASE+0x34) |
| #define IR_RX_BYTE_CNT (IRDA_BASE+0x38) |
| #define IR_CONFIG_2 (IRDA_BASE+0x3C) |
| #define IR_MODE_INV (1<<0) |
| #define IR_ONE_PIN (1<<1) |
| #define IR_INTERFACE_CONFIG (IRDA_BASE+0x40) |
| |
| /* GPIO */ |
| #define SYS_PINFUNC 0xB190002C |
| #define SYS_PF_USB (1<<15) /* 2nd USB device/host */ |
| #define SYS_PF_U3 (1<<14) /* GPIO23/U3TXD */ |
| #define SYS_PF_U2 (1<<13) /* GPIO22/U2TXD */ |
| #define SYS_PF_U1 (1<<12) /* GPIO21/U1TXD */ |
| #define SYS_PF_SRC (1<<11) /* GPIO6/SROMCKE */ |
| #define SYS_PF_CK5 (1<<10) /* GPIO3/CLK5 */ |
| #define SYS_PF_CK4 (1<<9) /* GPIO2/CLK4 */ |
| #define SYS_PF_IRF (1<<8) /* GPIO15/IRFIRSEL */ |
| #define SYS_PF_UR3 (1<<7) /* GPIO[14:9]/UART3 */ |
| #define SYS_PF_I2D (1<<6) /* GPIO8/I2SDI */ |
| #define SYS_PF_I2S (1<<5) /* I2S/GPIO[29:31] */ |
| #define SYS_PF_NI2 (1<<4) /* NI2/GPIO[24:28] */ |
| #define SYS_PF_U0 (1<<3) /* U0TXD/GPIO20 */ |
| #define SYS_PF_RD (1<<2) /* IRTXD/GPIO19 */ |
| #define SYS_PF_A97 (1<<1) /* AC97/SSL1 */ |
| #define SYS_PF_S0 (1<<0) /* SSI_0/GPIO[16:18] */ |
| #define SYS_TRIOUTRD 0xB1900100 |
| #define SYS_TRIOUTCLR 0xB1900100 |
| #define SYS_OUTPUTRD 0xB1900108 |
| #define SYS_OUTPUTSET 0xB1900108 |
| #define SYS_OUTPUTCLR 0xB190010C |
| #define SYS_PINSTATERD 0xB1900110 |
| #define SYS_PININPUTEN 0xB1900110 |
| |
| /* GPIO2, Au1500 only */ |
| #define GPIO2_BASE 0xB1700000 |
| #define GPIO2_DIR (GPIO2_BASE + 0) |
| #define GPIO2_DATA_EN (GPIO2_BASE + 8) |
| #define GPIO2_PIN_STATE (GPIO2_BASE + 0xC) |
| #define GPIO2_INT_ENABLE (GPIO2_BASE + 0x10) |
| #define GPIO2_ENABLE (GPIO2_BASE + 0x14) |
| |
| /* Power Management */ |
| #define SYS_SCRATCH0 0xB1900018 |
| #define SYS_SCRATCH1 0xB190001C |
| #define SYS_WAKEMSK 0xB1900034 |
| #define SYS_ENDIAN 0xB1900038 |
| #define SYS_POWERCTRL 0xB190003C |
| #define SYS_WAKESRC 0xB190005C |
| #define SYS_SLPPWR 0xB1900078 |
| #define SYS_SLEEP 0xB190007C |
| |
| /* Clock Controller */ |
| #define SYS_FREQCTRL0 0xB1900020 |
| #define SYS_FC_FRDIV2_BIT 22 |
| #define SYS_FC_FRDIV2_MASK (0xff << FQC2_FRDIV2_BIT) |
| #define SYS_FC_FE2 (1<<21) |
| #define SYS_FC_FS2 (1<<20) |
| #define SYS_FC_FRDIV1_BIT 12 |
| #define SYS_FC_FRDIV1_MASK (0xff << FQC2_FRDIV1_BIT) |
| #define SYS_FC_FE1 (1<<11) |
| #define SYS_FC_FS1 (1<<10) |
| #define SYS_FC_FRDIV0_BIT 2 |
| #define SYS_FC_FRDIV0_MASK (0xff << FQC2_FRDIV0_BIT) |
| #define SYS_FC_FE0 (1<<1) |
| #define SYS_FC_FS0 (1<<0) |
| #define SYS_FREQCTRL1 0xB1900024 |
| #define SYS_FC_FRDIV5_BIT 22 |
| #define SYS_FC_FRDIV5_MASK (0xff << FQC2_FRDIV5_BIT) |
| #define SYS_FC_FE5 (1<<21) |
| #define SYS_FC_FS5 (1<<20) |
| #define SYS_FC_FRDIV4_BIT 12 |
| #define SYS_FC_FRDIV4_MASK (0xff << FQC2_FRDIV4_BIT) |
| #define SYS_FC_FE4 (1<<11) |
| #define SYS_FC_FS4 (1<<10) |
| #define SYS_FC_FRDIV3_BIT 2 |
| #define SYS_FC_FRDIV3_MASK (0xff << FQC2_FRDIV3_BIT) |
| #define SYS_FC_FE3 (1<<1) |
| #define SYS_FC_FS3 (1<<0) |
| #define SYS_CLKSRC 0xB1900028 |
| #define SYS_CS_ME1_BIT 27 |
| #define SYS_CS_ME1_MASK (0x7<<CSC_ME1_BIT) |
| #define SYS_CS_DE1 (1<<26) |
| #define SYS_CS_CE1 (1<<25) |
| #define SYS_CS_ME0_BIT 22 |
| #define SYS_CS_ME0_MASK (0x7<<CSC_ME0_BIT) |
| #define SYS_CS_DE0 (1<<21) |
| #define SYS_CS_CE0 (1<<20) |
| #define SYS_CS_MI2_BIT 17 |
| #define SYS_CS_MI2_MASK (0x7<<CSC_MI2_BIT) |
| #define SYS_CS_DI2 (1<<16) |
| #define SYS_CS_CI2 (1<<15) |
| #define SYS_CS_MUH_BIT 12 |
| #define SYS_CS_MUH_MASK (0x7<<CSC_MUH_BIT) |
| #define SYS_CS_DUH (1<<11) |
| #define SYS_CS_CUH (1<<10) |
| #define SYS_CS_MUD_BIT 7 |
| #define SYS_CS_MUD_MASK (0x7<<CSC_MUD_BIT) |
| #define SYS_CS_DUD (1<<6) |
| #define SYS_CS_CUD (1<<5) |
| #define SYS_CS_MIR_BIT 2 |
| #define SYS_CS_MIR_MASK (0x7<<CSC_MIR_BIT) |
| #define SYS_CS_DIR (1<<1) |
| #define SYS_CS_CIR (1<<0) |
| |
| #define SYS_CS_MUX_AUX 0x1 |
| #define SYS_CS_MUX_FQ0 0x2 |
| #define SYS_CS_MUX_FQ1 0x3 |
| #define SYS_CS_MUX_FQ2 0x4 |
| #define SYS_CS_MUX_FQ3 0x5 |
| #define SYS_CS_MUX_FQ4 0x6 |
| #define SYS_CS_MUX_FQ5 0x7 |
| #define SYS_CPUPLL 0xB1900060 |
| #define SYS_AUXPLL 0xB1900064 |
| |
| /* AC97 Controller */ |
| #define AC97C_CONFIG 0xB0000000 |
| #define AC97C_RECV_SLOTS_BIT 13 |
| #define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT) |
| #define AC97C_XMIT_SLOTS_BIT 3 |
| #define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT) |
| #define AC97C_SG (1<<2) |
| #define AC97C_SYNC (1<<1) |
| #define AC97C_RESET (1<<0) |
| #define AC97C_STATUS 0xB0000004 |
| #define AC97C_XU (1<<11) |
| #define AC97C_XO (1<<10) |
| #define AC97C_RU (1<<9) |
| #define AC97C_RO (1<<8) |
| #define AC97C_READY (1<<7) |
| #define AC97C_CP (1<<6) |
| #define AC97C_TR (1<<5) |
| #define AC97C_TE (1<<4) |
| #define AC97C_TF (1<<3) |
| #define AC97C_RR (1<<2) |
| #define AC97C_RE (1<<1) |
| #define AC97C_RF (1<<0) |
| #define AC97C_DATA 0xB0000008 |
| #define AC97C_CMD 0xB000000C |
| #define AC97C_WD_BIT 16 |
| #define AC97C_READ (1<<7) |
| #define AC97C_INDEX_MASK 0x7f |
| #define AC97C_CNTRL 0xB0000010 |
| #define AC97C_RS (1<<1) |
| #define AC97C_CE (1<<0) |
| |
| #define DB1000_BCSR_ADDR 0xAE000000 |
| #define DB1550_BCSR_ADDR 0xAF000000 |
| |
| #ifdef CONFIG_DBAU1550 |
| #define DB1XX0_BCSR_ADDR DB1550_BCSR_ADDR |
| #else |
| #define DB1XX0_BCSR_ADDR DB1000_BCSR_ADDR |
| #endif |
| |
| #ifdef CONFIG_SOC_AU1500 |
| /* Au1500 PCI Controller */ |
| #define Au1500_CFG_BASE 0xB4005000 /* virtual, kseg0 addr */ |
| #define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0) |
| #define Au1500_PCI_CFG (Au1500_CFG_BASE + 4) |
| #define PCI_ERROR ((1<<22) | (1<<23) | (1<<24) | (1<<25) | (1<<26) | (1<<27)) |
| #define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8) |
| #define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC) |
| #define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10) |
| #define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14) |
| #define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18) |
| #define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C) |
| #define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20) |
| #define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100) |
| #define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104) |
| #define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108) |
| #define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C) |
| #define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110) |
| |
| #define Au1500_PCI_HDR 0xB4005100 /* virtual, kseg0 addr */ |
| |
| /* All of our structures, like pci resource, have 32 bit members. |
| * Drivers are expected to do an ioremap on the PCI MEM resource, but it's |
| * hard to store 0x4 0000 0000 in a 32 bit type. We require a small patch |
| * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and |
| * (u32)Au1500_PCI_MEM_END and change those to the full 36 bit PCI MEM |
| * addresses. For PCI IO, it's simpler because we get to do the ioremap |
| * ourselves and then adjust the device's resources. |
| */ |
| #define Au1500_EXT_CFG 0x600000000 |
| #define Au1500_EXT_CFG_TYPE1 0x680000000 |
| #define Au1500_PCI_IO_START 0x500000000 |
| #define Au1500_PCI_IO_END 0x5000FFFFF |
| #define Au1500_PCI_MEM_START 0x440000000 |
| #define Au1500_PCI_MEM_END 0x443FFFFFF |
| |
| #define PCI_IO_START (Au1500_PCI_IO_START + 0x300) |
| #define PCI_IO_END (Au1500_PCI_IO_END) |
| #define PCI_MEM_START (Au1500_PCI_MEM_START) |
| #define PCI_MEM_END (Au1500_PCI_MEM_END) |
| #define PCI_FIRST_DEVFN (0<<3) |
| #define PCI_LAST_DEVFN (19<<3) |
| |
| #endif |
| |
| #if defined(CONFIG_SOC_AU1100) || (defined(CONFIG_SOC_AU1000) && !defined(CONFIG_MIPS_PB1000)) |
| /* no PCI bus controller */ |
| #define PCI_IO_START 0 |
| #define PCI_IO_END 0 |
| #define PCI_MEM_START 0 |
| #define PCI_MEM_END 0 |
| #define PCI_FIRST_DEVFN 0 |
| #define PCI_LAST_DEVFN 0 |
| #endif |
| #define AU1X_SOCK0_IO 0xF00000000 |
| #define AU1X_SOCK0_PHYS_ATTR 0xF40000000 |
| #define AU1X_SOCK0_PHYS_MEM 0xF80000000 |
| |
| /* pcmcia socket 1 needs external glue logic so the memory map |
| * differs from board to board. |
| */ |
| |
| /* Only for db board, not older pb */ |
| #define AU1X_SOCK1_IO 0xF04000000 |
| #define AU1X_SOCK1_PHYS_ATTR 0xF44000000 |
| #define AU1X_SOCK1_PHYS_MEM 0xF84000000 |
| |
| #endif |