| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * EFI application loader |
| * |
| * Copyright (c) 2016 Alexander Graf |
| */ |
| |
| #include <charset.h> |
| #include <common.h> |
| #include <command.h> |
| #include <dm.h> |
| #include <efi_loader.h> |
| #include <efi_selftest.h> |
| #include <errno.h> |
| #include <linux/libfdt.h> |
| #include <linux/libfdt_env.h> |
| #include <mapmem.h> |
| #include <memalign.h> |
| #include <asm/global_data.h> |
| #include <asm-generic/sections.h> |
| #include <asm-generic/unaligned.h> |
| #include <linux/linkage.h> |
| |
| #ifdef CONFIG_ARMV7_NONSEC |
| #include <asm/armv7.h> |
| #include <asm/secure.h> |
| #endif |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define OBJ_LIST_NOT_INITIALIZED 1 |
| |
| static efi_status_t efi_obj_list_initialized = OBJ_LIST_NOT_INITIALIZED; |
| |
| static struct efi_device_path *bootefi_image_path; |
| static struct efi_device_path *bootefi_device_path; |
| |
| /* Initialize and populate EFI object list */ |
| efi_status_t efi_init_obj_list(void) |
| { |
| efi_status_t ret = EFI_SUCCESS; |
| |
| /* |
| * On the ARM architecture gd is mapped to a fixed register (r9 or x18). |
| * As this register may be overwritten by an EFI payload we save it here |
| * and restore it on every callback entered. |
| */ |
| efi_save_gd(); |
| |
| /* Initialize once only */ |
| if (efi_obj_list_initialized != OBJ_LIST_NOT_INITIALIZED) |
| return efi_obj_list_initialized; |
| |
| /* Initialize system table */ |
| ret = efi_initialize_system_table(); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| |
| /* Initialize root node */ |
| ret = efi_root_node_register(); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| |
| /* Initialize EFI driver uclass */ |
| ret = efi_driver_init(); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| |
| ret = efi_console_register(); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| #ifdef CONFIG_PARTITIONS |
| ret = efi_disk_register(); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| #endif |
| #if defined(CONFIG_LCD) || defined(CONFIG_DM_VIDEO) |
| ret = efi_gop_register(); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| #endif |
| #ifdef CONFIG_NET |
| ret = efi_net_register(); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| #endif |
| #ifdef CONFIG_GENERATE_ACPI_TABLE |
| ret = efi_acpi_register(); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| #endif |
| #ifdef CONFIG_GENERATE_SMBIOS_TABLE |
| ret = efi_smbios_register(); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| #endif |
| ret = efi_watchdog_register(); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| |
| /* Initialize EFI runtime services */ |
| ret = efi_reset_system_init(); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| |
| out: |
| efi_obj_list_initialized = ret; |
| return ret; |
| } |
| |
| /* |
| * Allow unaligned memory access. |
| * |
| * This routine is overridden by architectures providing this feature. |
| */ |
| void __weak allow_unaligned(void) |
| { |
| } |
| |
| /* |
| * Set the load options of an image from an environment variable. |
| * |
| * @loaded_image_info: the image |
| * @env_var: name of the environment variable |
| */ |
| static void set_load_options(struct efi_loaded_image *loaded_image_info, |
| const char *env_var) |
| { |
| size_t size; |
| const char *env = env_get(env_var); |
| u16 *pos; |
| |
| loaded_image_info->load_options = NULL; |
| loaded_image_info->load_options_size = 0; |
| if (!env) |
| return; |
| size = utf8_utf16_strlen(env) + 1; |
| loaded_image_info->load_options = calloc(size, sizeof(u16)); |
| if (!loaded_image_info->load_options) { |
| printf("ERROR: Out of memory\n"); |
| return; |
| } |
| pos = loaded_image_info->load_options; |
| utf8_utf16_strcpy(&pos, env); |
| loaded_image_info->load_options_size = size * 2; |
| } |
| |
| /** |
| * copy_fdt() - Copy the device tree to a new location available to EFI |
| * |
| * The FDT is relocated into a suitable location within the EFI memory map. |
| * An additional 12KB is added to the space in case the device tree needs to be |
| * expanded later with fdt_open_into(). |
| * |
| * @fdt_addr: On entry, address of start of FDT. On exit, address of relocated |
| * FDT start |
| * @fdt_sizep: Returns new size of FDT, including |
| * @return new relocated address of FDT |
| */ |
| static efi_status_t copy_fdt(ulong *fdt_addrp, ulong *fdt_sizep) |
| { |
| unsigned long fdt_ram_start = -1L, fdt_pages; |
| efi_status_t ret = 0; |
| void *fdt, *new_fdt; |
| u64 new_fdt_addr; |
| uint fdt_size; |
| int i; |
| |
| for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { |
| u64 ram_start = gd->bd->bi_dram[i].start; |
| u64 ram_size = gd->bd->bi_dram[i].size; |
| |
| if (!ram_size) |
| continue; |
| |
| if (ram_start < fdt_ram_start) |
| fdt_ram_start = ram_start; |
| } |
| |
| /* |
| * Give us at least 4KB of breathing room in case the device tree needs |
| * to be expanded later. Round up to the nearest EFI page boundary. |
| */ |
| fdt = map_sysmem(*fdt_addrp, 0); |
| fdt_size = fdt_totalsize(fdt); |
| fdt_size += 4096 * 3; |
| fdt_size = ALIGN(fdt_size + EFI_PAGE_SIZE - 1, EFI_PAGE_SIZE); |
| fdt_pages = fdt_size >> EFI_PAGE_SHIFT; |
| |
| /* Safe fdt location is at 127MB */ |
| new_fdt_addr = fdt_ram_start + (127 * 1024 * 1024) + fdt_size; |
| ret = efi_allocate_pages(EFI_ALLOCATE_MAX_ADDRESS, |
| EFI_RUNTIME_SERVICES_DATA, fdt_pages, |
| &new_fdt_addr); |
| if (ret != EFI_SUCCESS) { |
| /* If we can't put it there, put it somewhere */ |
| new_fdt_addr = (ulong)memalign(EFI_PAGE_SIZE, fdt_size); |
| ret = efi_allocate_pages(EFI_ALLOCATE_MAX_ADDRESS, |
| EFI_RUNTIME_SERVICES_DATA, fdt_pages, |
| &new_fdt_addr); |
| if (ret != EFI_SUCCESS) { |
| printf("ERROR: Failed to reserve space for FDT\n"); |
| goto done; |
| } |
| } |
| |
| new_fdt = map_sysmem(new_fdt_addr, fdt_size); |
| memcpy(new_fdt, fdt, fdt_totalsize(fdt)); |
| fdt_set_totalsize(new_fdt, fdt_size); |
| |
| *fdt_addrp = new_fdt_addr; |
| *fdt_sizep = fdt_size; |
| done: |
| return ret; |
| } |
| |
| static efi_status_t efi_do_enter( |
| efi_handle_t image_handle, struct efi_system_table *st, |
| EFIAPI efi_status_t (*entry)( |
| efi_handle_t image_handle, |
| struct efi_system_table *st)) |
| { |
| efi_status_t ret = EFI_LOAD_ERROR; |
| |
| if (entry) |
| ret = entry(image_handle, st); |
| st->boottime->exit(image_handle, ret, 0, NULL); |
| return ret; |
| } |
| |
| #ifdef CONFIG_ARM64 |
| static efi_status_t efi_run_in_el2(EFIAPI efi_status_t (*entry)( |
| efi_handle_t image_handle, struct efi_system_table *st), |
| efi_handle_t image_handle, struct efi_system_table *st) |
| { |
| /* Enable caches again */ |
| dcache_enable(); |
| |
| return efi_do_enter(image_handle, st, entry); |
| } |
| #endif |
| |
| #ifdef CONFIG_ARMV7_NONSEC |
| static bool is_nonsec; |
| |
| static efi_status_t efi_run_in_hyp(EFIAPI efi_status_t (*entry)( |
| efi_handle_t image_handle, struct efi_system_table *st), |
| efi_handle_t image_handle, struct efi_system_table *st) |
| { |
| /* Enable caches again */ |
| dcache_enable(); |
| |
| is_nonsec = true; |
| |
| return efi_do_enter(image_handle, st, entry); |
| } |
| #endif |
| |
| /* |
| * efi_carve_out_dt_rsv() - Carve out DT reserved memory ranges |
| * |
| * The mem_rsv entries of the FDT are added to the memory map. Any failures are |
| * ignored because this is not critical and we would rather continue to try to |
| * boot. |
| * |
| * @fdt: Pointer to device tree |
| */ |
| static void efi_carve_out_dt_rsv(void *fdt) |
| { |
| int nr_rsv, i; |
| uint64_t addr, size, pages; |
| |
| nr_rsv = fdt_num_mem_rsv(fdt); |
| |
| /* Look for an existing entry and add it to the efi mem map. */ |
| for (i = 0; i < nr_rsv; i++) { |
| if (fdt_get_mem_rsv(fdt, i, &addr, &size) != 0) |
| continue; |
| |
| pages = ALIGN(size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT; |
| if (!efi_add_memory_map(addr, pages, EFI_RESERVED_MEMORY_TYPE, |
| false)) |
| printf("FDT memrsv map %d: Failed to add to map\n", i); |
| } |
| } |
| |
| static efi_status_t efi_install_fdt(ulong fdt_addr) |
| { |
| bootm_headers_t img = { 0 }; |
| ulong fdt_pages, fdt_size, fdt_start; |
| efi_status_t ret; |
| void *fdt; |
| |
| fdt = map_sysmem(fdt_addr, 0); |
| if (fdt_check_header(fdt)) { |
| printf("ERROR: invalid device tree\n"); |
| return EFI_INVALID_PARAMETER; |
| } |
| |
| /* Prepare fdt for payload */ |
| ret = copy_fdt(&fdt_addr, &fdt_size); |
| if (ret) |
| return ret; |
| |
| unmap_sysmem(fdt); |
| fdt = map_sysmem(fdt_addr, 0); |
| fdt_size = fdt_totalsize(fdt); |
| if (image_setup_libfdt(&img, fdt, 0, NULL)) { |
| printf("ERROR: failed to process device tree\n"); |
| return EFI_LOAD_ERROR; |
| } |
| |
| efi_carve_out_dt_rsv(fdt); |
| |
| /* Link to it in the efi tables */ |
| ret = efi_install_configuration_table(&efi_guid_fdt, fdt); |
| if (ret != EFI_SUCCESS) |
| return EFI_OUT_OF_RESOURCES; |
| |
| /* And reserve the space in the memory map */ |
| fdt_start = fdt_addr; |
| fdt_pages = fdt_size >> EFI_PAGE_SHIFT; |
| |
| ret = efi_add_memory_map(fdt_start, fdt_pages, |
| EFI_BOOT_SERVICES_DATA, true); |
| |
| return ret; |
| } |
| |
| /** |
| * do_bootefi_exec() - execute EFI binary |
| * |
| * @efi: address of the binary |
| * @device_path: path of the device from which the binary was loaded |
| * @image_path: device path of the binary |
| * Return: status code |
| * |
| * Load the EFI binary into a newly assigned memory unwinding the relocation |
| * information, install the loaded image protocol, and call the binary. |
| */ |
| static efi_status_t do_bootefi_exec(void *efi, |
| struct efi_device_path *device_path, |
| struct efi_device_path *image_path) |
| { |
| efi_handle_t mem_handle = NULL; |
| struct efi_device_path *memdp = NULL; |
| efi_status_t ret; |
| struct efi_loaded_image_obj *image_handle = NULL; |
| struct efi_loaded_image *loaded_image_info = NULL; |
| |
| EFIAPI efi_status_t (*entry)(efi_handle_t image_handle, |
| struct efi_system_table *st); |
| |
| /* |
| * Special case for efi payload not loaded from disk, such as |
| * 'bootefi hello' or for example payload loaded directly into |
| * memory via jtag, etc: |
| */ |
| if (!device_path && !image_path) { |
| printf("WARNING: using memory device/image path, this may confuse some payloads!\n"); |
| /* actual addresses filled in after efi_load_pe() */ |
| memdp = efi_dp_from_mem(0, 0, 0); |
| device_path = image_path = memdp; |
| /* |
| * Grub expects that the device path of the loaded image is |
| * installed on a handle. |
| */ |
| ret = efi_create_handle(&mem_handle); |
| if (ret != EFI_SUCCESS) |
| goto exit; |
| ret = efi_add_protocol(mem_handle, &efi_guid_device_path, |
| device_path); |
| if (ret != EFI_SUCCESS) |
| goto exit; |
| } else { |
| assert(device_path && image_path); |
| } |
| |
| ret = efi_setup_loaded_image(device_path, image_path, &image_handle, |
| &loaded_image_info); |
| if (ret != EFI_SUCCESS) |
| goto exit; |
| |
| /* Transfer environment variable bootargs as load options */ |
| set_load_options(loaded_image_info, "bootargs"); |
| /* Load the EFI payload */ |
| entry = efi_load_pe(image_handle, efi, loaded_image_info); |
| if (!entry) { |
| ret = EFI_LOAD_ERROR; |
| goto exit; |
| } |
| |
| if (memdp) { |
| struct efi_device_path_memory *mdp = (void *)memdp; |
| mdp->memory_type = loaded_image_info->image_code_type; |
| mdp->start_address = (uintptr_t)loaded_image_info->image_base; |
| mdp->end_address = mdp->start_address + |
| loaded_image_info->image_size; |
| } |
| |
| /* we don't support much: */ |
| env_set("efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported", |
| "{ro,boot}(blob)0000000000000000"); |
| |
| /* Call our payload! */ |
| debug("%s:%d Jumping to 0x%lx\n", __func__, __LINE__, (long)entry); |
| |
| if (setjmp(&image_handle->exit_jmp)) { |
| ret = image_handle->exit_status; |
| goto exit; |
| } |
| |
| #ifdef CONFIG_ARM64 |
| /* On AArch64 we need to make sure we call our payload in < EL3 */ |
| if (current_el() == 3) { |
| smp_kick_all_cpus(); |
| dcache_disable(); /* flush cache before switch to EL2 */ |
| |
| /* Move into EL2 and keep running there */ |
| armv8_switch_to_el2((ulong)entry, |
| (ulong)image_handle, |
| (ulong)&systab, 0, (ulong)efi_run_in_el2, |
| ES_TO_AARCH64); |
| |
| /* Should never reach here, efi exits with longjmp */ |
| while (1) { } |
| } |
| #endif |
| |
| #ifdef CONFIG_ARMV7_NONSEC |
| if (armv7_boot_nonsec() && !is_nonsec) { |
| dcache_disable(); /* flush cache before switch to HYP */ |
| |
| armv7_init_nonsec(); |
| secure_ram_addr(_do_nonsec_entry)( |
| efi_run_in_hyp, |
| (uintptr_t)entry, |
| (uintptr_t)image_handle, |
| (uintptr_t)&systab); |
| |
| /* Should never reach here, efi exits with longjmp */ |
| while (1) { } |
| } |
| #endif |
| |
| ret = efi_do_enter(image_handle, &systab, entry); |
| |
| exit: |
| /* image has returned, loaded-image obj goes *poof*: */ |
| if (image_handle) |
| efi_delete_handle(&image_handle->parent); |
| if (mem_handle) |
| efi_delete_handle(mem_handle); |
| |
| return ret; |
| } |
| |
| static int do_bootefi_bootmgr_exec(void) |
| { |
| struct efi_device_path *device_path, *file_path; |
| void *addr; |
| efi_status_t r; |
| |
| addr = efi_bootmgr_load(&device_path, &file_path); |
| if (!addr) |
| return 1; |
| |
| printf("## Starting EFI application at %p ...\n", addr); |
| r = do_bootefi_exec(addr, device_path, file_path); |
| printf("## Application terminated, r = %lu\n", |
| r & ~EFI_ERROR_MASK); |
| |
| if (r != EFI_SUCCESS) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* Interpreter command to boot an arbitrary EFI image from memory */ |
| static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| unsigned long addr; |
| char *saddr; |
| efi_status_t r; |
| unsigned long fdt_addr; |
| |
| /* Allow unaligned memory access */ |
| allow_unaligned(); |
| |
| /* Initialize EFI drivers */ |
| r = efi_init_obj_list(); |
| if (r != EFI_SUCCESS) { |
| printf("Error: Cannot set up EFI drivers, r = %lu\n", |
| r & ~EFI_ERROR_MASK); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (argc < 2) |
| return CMD_RET_USAGE; |
| |
| if (argc > 2) { |
| fdt_addr = simple_strtoul(argv[2], NULL, 16); |
| if (!fdt_addr && *argv[2] != '0') |
| return CMD_RET_USAGE; |
| /* Install device tree */ |
| r = efi_install_fdt(fdt_addr); |
| if (r != EFI_SUCCESS) { |
| printf("ERROR: failed to install device tree\n"); |
| return CMD_RET_FAILURE; |
| } |
| } else { |
| /* Remove device tree. EFI_NOT_FOUND can be ignored here */ |
| efi_install_configuration_table(&efi_guid_fdt, NULL); |
| printf("WARNING: booting without device tree\n"); |
| } |
| #ifdef CONFIG_CMD_BOOTEFI_HELLO |
| if (!strcmp(argv[1], "hello")) { |
| ulong size = __efi_helloworld_end - __efi_helloworld_begin; |
| |
| saddr = env_get("loadaddr"); |
| if (saddr) |
| addr = simple_strtoul(saddr, NULL, 16); |
| else |
| addr = CONFIG_SYS_LOAD_ADDR; |
| memcpy(map_sysmem(addr, size), __efi_helloworld_begin, size); |
| } else |
| #endif |
| #ifdef CONFIG_CMD_BOOTEFI_SELFTEST |
| if (!strcmp(argv[1], "selftest")) { |
| struct efi_loaded_image_obj *image_handle; |
| struct efi_loaded_image *loaded_image_info; |
| |
| /* Construct a dummy device path. */ |
| bootefi_device_path = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE, |
| (uintptr_t)&efi_selftest, |
| (uintptr_t)&efi_selftest); |
| bootefi_image_path = efi_dp_from_file(NULL, 0, "\\selftest"); |
| |
| r = efi_setup_loaded_image(bootefi_device_path, |
| bootefi_image_path, &image_handle, |
| &loaded_image_info); |
| if (r != EFI_SUCCESS) |
| return CMD_RET_FAILURE; |
| |
| efi_save_gd(); |
| /* Transfer environment variable efi_selftest as load options */ |
| set_load_options(loaded_image_info, "efi_selftest"); |
| /* Execute the test */ |
| r = efi_selftest(image_handle, &systab); |
| efi_restore_gd(); |
| free(loaded_image_info->load_options); |
| efi_delete_handle(&image_handle->parent); |
| return r != EFI_SUCCESS; |
| } else |
| #endif |
| if (!strcmp(argv[1], "bootmgr")) { |
| return do_bootefi_bootmgr_exec(); |
| } else { |
| saddr = argv[1]; |
| |
| addr = simple_strtoul(saddr, NULL, 16); |
| /* Check that a numeric value was passed */ |
| if (!addr && *saddr != '0') |
| return CMD_RET_USAGE; |
| |
| } |
| |
| printf("## Starting EFI application at %08lx ...\n", addr); |
| r = do_bootefi_exec(map_sysmem(addr, 0), bootefi_device_path, |
| bootefi_image_path); |
| printf("## Application terminated, r = %lu\n", |
| r & ~EFI_ERROR_MASK); |
| |
| if (r != EFI_SUCCESS) |
| return 1; |
| else |
| return 0; |
| } |
| |
| #ifdef CONFIG_SYS_LONGHELP |
| static char bootefi_help_text[] = |
| "<image address> [fdt address]\n" |
| " - boot EFI payload stored at address <image address>.\n" |
| " If specified, the device tree located at <fdt address> gets\n" |
| " exposed as EFI configuration table.\n" |
| #ifdef CONFIG_CMD_BOOTEFI_HELLO |
| "bootefi hello\n" |
| " - boot a sample Hello World application stored within U-Boot\n" |
| #endif |
| #ifdef CONFIG_CMD_BOOTEFI_SELFTEST |
| "bootefi selftest [fdt address]\n" |
| " - boot an EFI selftest application stored within U-Boot\n" |
| " Use environment variable efi_selftest to select a single test.\n" |
| " Use 'setenv efi_selftest list' to enumerate all tests.\n" |
| #endif |
| "bootefi bootmgr [fdt addr]\n" |
| " - load and boot EFI payload based on BootOrder/BootXXXX variables.\n" |
| "\n" |
| " If specified, the device tree located at <fdt address> gets\n" |
| " exposed as EFI configuration table.\n"; |
| #endif |
| |
| U_BOOT_CMD( |
| bootefi, 3, 0, do_bootefi, |
| "Boots an EFI payload from memory", |
| bootefi_help_text |
| ); |
| |
| void efi_set_bootdev(const char *dev, const char *devnr, const char *path) |
| { |
| char filename[32] = { 0 }; /* dp->str is u16[32] long */ |
| char *s; |
| |
| /* efi_set_bootdev is typically called repeatedly, recover memory */ |
| efi_free_pool(bootefi_device_path); |
| efi_free_pool(bootefi_image_path); |
| /* If blk_get_device_part_str fails, avoid duplicate free. */ |
| bootefi_device_path = NULL; |
| bootefi_image_path = NULL; |
| |
| if (strcmp(dev, "Net")) { |
| struct blk_desc *desc; |
| disk_partition_t fs_partition; |
| int part; |
| |
| part = blk_get_device_part_str(dev, devnr, &desc, &fs_partition, |
| 1); |
| if (part < 0) |
| return; |
| |
| bootefi_device_path = efi_dp_from_part(desc, part); |
| } else { |
| #ifdef CONFIG_NET |
| bootefi_device_path = efi_dp_from_eth(); |
| #endif |
| } |
| |
| if (!path) |
| return; |
| |
| if (strcmp(dev, "Net")) { |
| /* Add leading / to fs paths, because they're absolute */ |
| snprintf(filename, sizeof(filename), "/%s", path); |
| } else { |
| snprintf(filename, sizeof(filename), "%s", path); |
| } |
| /* DOS style file path: */ |
| s = filename; |
| while ((s = strchr(s, '/'))) |
| *s++ = '\\'; |
| bootefi_image_path = efi_dp_from_file(NULL, 0, filename); |
| } |