blob: 05f66f700ca364bfac804c7dd39e3bcf07c94b88 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Test-related constants for sandbox
*
* Copyright (c) 2014 Google, Inc
*/
#ifndef __ASM_TEST_H
#define __ASM_TEST_H
/* The sandbox driver always permits an I2C device with this address */
#define SANDBOX_I2C_TEST_ADDR 0x59
#define SANDBOX_PCI_VENDOR_ID 0x1234
#define SANDBOX_PCI_SWAP_CASE_EMUL_ID 0x5678
#define SANDBOX_PCI_PMC_EMUL_ID 0x5677
#define SANDBOX_PCI_P2SB_EMUL_ID 0x5676
#define SANDBOX_PCI_CLASS_CODE PCI_CLASS_CODE_COMM
#define SANDBOX_PCI_CLASS_SUB_CODE PCI_CLASS_SUB_CODE_COMM_SERIAL
#define PCI_CAP_ID_PM_OFFSET 0x50
#define PCI_CAP_ID_EXP_OFFSET 0x60
#define PCI_CAP_ID_MSIX_OFFSET 0x70
#define PCI_CAP_ID_EA_OFFSET 0x80
#define PCI_EXT_CAP_ID_ERR_OFFSET 0x100
#define PCI_EXT_CAP_ID_VC_OFFSET 0x200
#define PCI_EXT_CAP_ID_DSN_OFFSET 0x300
/* Useful for PCI_VDEVICE() macro */
#define PCI_VENDOR_ID_SANDBOX SANDBOX_PCI_VENDOR_ID
#define SWAP_CASE_DRV_DATA 0x55aa
#define SANDBOX_CLK_RATE 32768
/* Macros used to test PCI EA capability structure */
#define PCI_CAP_EA_BASE_LO0 0x00100000
#define PCI_CAP_EA_BASE_LO1 0x00110000
#define PCI_CAP_EA_BASE_LO2 0x00120000
#define PCI_CAP_EA_BASE_LO4 0x00140000
#define PCI_CAP_EA_BASE_HI2 0x00020000ULL
#define PCI_CAP_EA_BASE_HI4 0x00040000ULL
#define PCI_CAP_EA_SIZE_LO 0x0000ffff
#define PCI_CAP_EA_SIZE_HI 0x00000010ULL
#define PCI_EA_BAR2_MAGIC 0x72727272
#define PCI_EA_BAR4_MAGIC 0x74747474
enum {
SANDBOX_IRQN_PEND = 1, /* Interrupt number for 'pending' test */
};
/* System controller driver data */
enum {
SYSCON0 = 32,
SYSCON1,
SYSCON_COUNT
};
/**
* sandbox_i2c_set_test_mode() - set test mode for running unit tests
*
* See sandbox_i2c_xfer() for the behaviour changes.
*
* @bus: sandbox I2C bus to adjust
* @test_mode: true to select test mode, false to run normally
*/
void sandbox_i2c_set_test_mode(struct udevice *bus, bool test_mode);
enum sandbox_i2c_eeprom_test_mode {
SIE_TEST_MODE_NONE,
/* Permits read/write of only one byte per I2C transaction */
SIE_TEST_MODE_SINGLE_BYTE,
};
void sandbox_i2c_eeprom_set_test_mode(struct udevice *dev,
enum sandbox_i2c_eeprom_test_mode mode);
void sandbox_i2c_eeprom_set_offset_len(struct udevice *dev, int offset_len);
void sandbox_i2c_eeprom_set_chip_addr_offset_mask(struct udevice *dev,
uint mask);
uint sanbox_i2c_eeprom_get_prev_addr(struct udevice *dev);
uint sanbox_i2c_eeprom_get_prev_offset(struct udevice *dev);
/**
* sandbox_i2c_rtc_set_offset() - set the time offset from system/base time
*
* @dev: RTC device to adjust
* @use_system_time: true to use system time, false to use @base_time
* @offset: RTC offset from current system/base time (-1 for no
* change)
* @return old value of RTC offset
*/
long sandbox_i2c_rtc_set_offset(struct udevice *dev, bool use_system_time,
int offset);
/**
* sandbox_i2c_rtc_get_set_base_time() - get and set the base time
*
* @dev: RTC device to adjust
* @base_time: New base system time (set to -1 for no change)
* @return old base time
*/
long sandbox_i2c_rtc_get_set_base_time(struct udevice *dev, long base_time);
int sandbox_usb_keyb_add_string(struct udevice *dev, const char *str);
/**
* sandbox_osd_get_mem() - get the internal memory of a sandbox OSD
*
* @dev: OSD device for which to access the internal memory for
* @buf: pointer to buffer to receive the OSD memory data
* @buflen: length of buffer in bytes
*/
int sandbox_osd_get_mem(struct udevice *dev, u8 *buf, size_t buflen);
/**
* sandbox_pwm_get_config() - get the PWM config for a channel
*
* @dev: Device to check
* @channel: Channel number to check
* @period_ns: Period of the PWM in nanoseconds
* @duty_ns: Current duty cycle of the PWM in nanoseconds
* @enable: true if the PWM is enabled
* @polarity: true if the PWM polarity is active high
* @return 0 if OK, -ENOSPC if the PWM number is invalid
*/
int sandbox_pwm_get_config(struct udevice *dev, uint channel, uint *period_nsp,
uint *duty_nsp, bool *enablep, bool *polarityp);
/**
* sandbox_sf_set_block_protect() - Set the BP bits of the status register
*
* @dev: Device to update
* @bp_mask: BP bits to set (bits 2:0, so a value of 0 to 7)
*/
void sandbox_sf_set_block_protect(struct udevice *dev, int bp_mask);
/**
* sandbox_get_codec_params() - Read back codec parameters
*
* This reads back the parameters set by audio_codec_set_params() for the
* sandbox audio driver. Arguments are as for that function.
*/
void sandbox_get_codec_params(struct udevice *dev, int *interfacep, int *ratep,
int *mclk_freqp, int *bits_per_samplep,
uint *channelsp);
/**
* sandbox_get_i2s_sum() - Read back the sum of the audio data so far
*
* This data is provided to the sandbox driver by the I2S tx_data() method.
*
* @dev: Device to check
* @return sum of audio data
*/
int sandbox_get_i2s_sum(struct udevice *dev);
/**
* sandbox_get_setup_called() - Returns the number of times setup(*) was called
*
* This is used in the sound test
*
* @dev: Device to check
* @return call count for the setup() method
*/
int sandbox_get_setup_called(struct udevice *dev);
/**
* sandbox_get_sound_active() - Returns whether sound play is in progress
*
* @return true if active, false if not
*/
int sandbox_get_sound_active(struct udevice *dev);
/**
* sandbox_get_sound_sum() - Read back the sum of the sound data so far
*
* This data is provided to the sandbox driver by the sound play() method.
*
* @dev: Device to check
* @return sum of audio data
*/
int sandbox_get_sound_sum(struct udevice *dev);
/**
* sandbox_set_allow_beep() - Set whether the 'beep' interface is supported
*
* @dev: Device to update
* @allow: true to allow the start_beep() method, false to disallow it
*/
void sandbox_set_allow_beep(struct udevice *dev, bool allow);
/**
* sandbox_get_beep_frequency() - Get the frequency of the current beep
*
* @dev: Device to check
* @return frequency of beep, if there is an active beep, else 0
*/
int sandbox_get_beep_frequency(struct udevice *dev);
/**
* sandbox_spi_get_speed() - Get current speed setting of a sandbox spi bus
*
* @dev: Device to check
* @return current bus speed
*/
uint sandbox_spi_get_speed(struct udevice *dev);
/**
* sandbox_spi_get_mode() - Get current mode setting of a sandbox spi bus
*
* @dev: Device to check
* @return current mode
*/
uint sandbox_spi_get_mode(struct udevice *dev);
/**
* sandbox_get_pch_spi_protect() - Get the PCI SPI protection status
*
* @dev: Device to check
* @return 0 if not protected, 1 if protected
*/
int sandbox_get_pch_spi_protect(struct udevice *dev);
/**
* sandbox_get_pci_ep_irq_count() - Get the PCI EP IRQ count
*
* @dev: Device to check
* @return irq count
*/
int sandbox_get_pci_ep_irq_count(struct udevice *dev);
/**
* sandbox_pci_read_bar() - Read the BAR value for a read_config operation
*
* This is used in PCI emulators to read a base address reset. This has special
* rules because when the register is set to 0xffffffff it can be used to
* discover the type and size of the BAR.
*
* @barval: Current value of the BAR
* @type: Type of BAR (PCI_BASE_ADDRESS_SPACE_IO or
* PCI_BASE_ADDRESS_MEM_TYPE_32)
* @size: Size of BAR in bytes
* @return BAR value to return from emulator
*/
uint sandbox_pci_read_bar(u32 barval, int type, uint size);
/**
* sandbox_set_enable_memio() - Enable readl/writel() for sandbox
*
* Normally these I/O functions do nothing with sandbox. Certain tests need them
* to work as for other architectures, so this function can be used to enable
* them.
*
* @enable: true to enable, false to disable
*/
void sandbox_set_enable_memio(bool enable);
#endif