blob: 9d018cad1c31d6aed16571651c848688b9a48dff [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP lx2160a SOC common device tree source
*
* Copyright 2018 NXP
*
*/
/ {
compatible = "fsl,lx2160a";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
memory@80000000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0 0x80000000>;
/* DRAM space - 1, size : 2 GB DRAM */
};
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "sysclk";
};
clockgen: clocking@1300000 {
compatible = "fsl,ls2080a-clockgen";
reg = <0 0x1300000 0 0xa0000>;
#clock-cells = <2>;
clocks = <&sysclk>;
};
gic: interrupt-controller@6000000 {
compatible = "arm,gic-v3";
reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
<0x0 0x06200000 0 0x100000>; /* GICR */
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <1 9 0x4>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
<1 14 0x8>, /* Physical NS PPI, active-low */
<1 11 0x8>, /* Virtual PPI, active-low */
<1 10 0x8>; /* Hypervisor PPI, active-low */
};
i2c0: i2c@2000000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <0 34 4>;
scl-gpio = <&gpio2 15 0>;
status = "disabled";
};
i2c1: i2c@2010000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <0 34 4>;
status = "disabled";
};
i2c2: i2c@2020000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <0 35 4>;
status = "disabled";
};
i2c3: i2c@2030000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <0 35 4>;
status = "disabled";
};
i2c4: i2c@2040000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2040000 0x0 0x10000>;
interrupts = <0 74 4>;
scl-gpio = <&gpio2 16 0>;
status = "disabled";
};
i2c5: i2c@2050000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2050000 0x0 0x10000>;
interrupts = <0 74 4>;
status = "disabled";
};
i2c6: i2c@2060000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2060000 0x0 0x10000>;
interrupts = <0 75 4>;
status = "disabled";
};
i2c7: i2c@2070000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2070000 0x0 0x10000>;
interrupts = <0 75 4>;
status = "disabled";
};
uart0: serial@21c0000 {
compatible = "arm,pl011";
reg = <0x0 0x21c0000 0x0 0x1000>;
clocks = <&clockgen 4 0>;
status = "disabled";
};
uart1: serial@21d0000 {
compatible = "arm,pl011";
reg = <0x0 0x21d0000 0x0 0x1000>;
clocks = <&clockgen 4 0>;
status = "disabled";
};
uart2: serial@21e0000 {
compatible = "arm,pl011";
reg = <0x0 0x21e0000 0x0 0x1000>;
clocks = <&clockgen 4 0>;
status = "disabled";
};
uart3: serial@21f0000 {
compatible = "arm,pl011";
reg = <0x0 0x21f0000 0x0 0x1000>;
clocks = <&clockgen 4 0>;
status = "disabled";
};
dspi0: dspi@2100000 {
compatible = "fsl,vf610-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <0 26 0x4>; /* Level high type */
num-cs = <6>;
};
dspi1: dspi@2110000 {
compatible = "fsl,vf610-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <0 26 0x4>; /* Level high type */
num-cs = <6>;
};
dspi2: dspi@2120000 {
compatible = "fsl,vf610-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2120000 0x0 0x10000>;
interrupts = <0 241 0x4>; /* Level high type */
num-cs = <6>;
};
gpio2: gpio@2320000 {
compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2320000 0x0 0x10000>;
interrupts = <0 37 4>;
gpio-controller;
little-endian;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
usb0: usb3@3100000 {
compatible = "fsl,layerscape-dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <0 80 0x4>; /* Level high type */
dr_mode = "host";
};
usb1: usb3@3110000 {
compatible = "fsl,layerscape-dwc3";
reg = <0x0 0x3110000 0x0 0x10000>;
interrupts = <0 81 0x4>; /* Level high type */
dr_mode = "host";
};
esdhc0: esdhc@2140000 {
compatible = "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <0 28 0x4>; /* Level high type */
clocks = <&clockgen 4 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
bus-width = <4>;
status = "disabled";
};
esdhc1: esdhc@2150000 {
compatible = "fsl,esdhc";
reg = <0x0 0x2150000 0x0 0x10000>;
interrupts = <0 63 0x4>; /* Level high type */
clocks = <&clockgen 4 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
non-removable;
little-endian;
bus-width = <4>;
status = "disabled";
};
sata0: sata@3200000 {
compatible = "fsl,ls2080a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>;
interrupts = <0 133 4>;
clocks = <&clockgen 4 3>;
status = "disabled";
};
sata1: sata@3210000 {
compatible = "fsl,ls2080a-ahci";
reg = <0x0 0x3210000 0x0 0x10000>;
interrupts = <0 136 4>;
clocks = <&clockgen 4 3>;
status = "disabled";
};
sata2: sata@3220000 {
compatible = "fsl,ls2080a-ahci";
reg = <0x0 0x3220000 0x0 0x10000>;
interrupts = <0 97 4>;
clocks = <&clockgen 4 3>;
status = "disabled";
};
sata3: sata@3230000 {
compatible = "fsl,ls2080a-ahci";
reg = <0x0 0x3230000 0x0 0x10000>;
interrupts = <0 100 4>;
clocks = <&clockgen 4 3>;
status = "disabled";
};
pcie@3400000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03400000 0x0 0x80000 /* PAB registers */
0x00 0x03480000 0x0 0x40000 /* LUT registers */
0x00 0x034c0000 0x0 0x40000 /* PF control registers */
0x80 0x00000000 0x0 0x1000>; /* configuration space */
reg-names = "ccsr", "lut", "pf_ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
bus-range = <0x0 0xff>;
ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
};
pcie@3500000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03500000 0x0 0x80000 /* PAB registers */
0x00 0x03580000 0x0 0x40000 /* LUT registers */
0x00 0x035c0000 0x0 0x40000 /* PF control registers */
0x88 0x00000000 0x0 0x1000>; /* configuration space */
reg-names = "ccsr", "lut", "pf_ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
num-lanes = <2>;
bus-range = <0x0 0xff>;
ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>;
};
pcie@3600000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03600000 0x0 0x80000 /* PAB registers */
0x00 0x03680000 0x0 0x40000 /* LUT registers */
0x00 0x036c0000 0x0 0x40000 /* PF control registers */
0x90 0x00000000 0x0 0x1000>; /* configuration space */
reg-names = "ccsr", "lut", "pf_ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
bus-range = <0x0 0xff>;
ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>;
};
pcie@3700000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03700000 0x0 0x80000 /* PAB registers */
0x00 0x03780000 0x0 0x40000 /* LUT registers */
0x00 0x037c0000 0x0 0x40000 /* PF control registers */
0x98 0x00000000 0x0 0x1000>; /* configuration space */
reg-names = "ccsr", "lut", "pf_ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
bus-range = <0x0 0xff>;
ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>;
};
pcie@3800000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03800000 0x0 0x80000 /* PAB registers */
0x00 0x03880000 0x0 0x40000 /* LUT registers */
0x00 0x038c0000 0x0 0x40000 /* PF control registers */
0xa0 0x00000000 0x0 0x1000>; /* configuration space */
reg-names = "ccsr", "lut", "pf_ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
bus-range = <0x0 0xff>;
ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>;
};
pcie@3900000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03900000 0x0 0x80000 /* PAB registers */
0x00 0x03980000 0x0 0x40000 /* LUT registers */
0x00 0x039c0000 0x0 0x40000 /* PF control registers */
0xa8 0x00000000 0x0 0x1000>; /* configuration space */
reg-names = "ccsr", "lut", "pf_ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
bus-range = <0x0 0xff>;
ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>;
};
};