drivers/ram/stm32mp1/stm32mp1_ram.c - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
 /*
  * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
  */

 #define LOG_CATEGORY UCLASS_RAM

 #include <common.h>
 #include <clk.h>
 #include <dm.h>
 #include <init.h>
 #include <log.h>
 #include <ram.h>
 #include <regmap.h>
 #include <syscon.h>
 #include <asm/io.h>
 #include <dm/device_compat.h>
 #include "stm32mp1_ddr.h"
 #include "stm32mp1_ddr_regs.h"

 /* DDR subsystem configuration */
 struct stm32mp1_ddr_cfg {
 	u8 nb_bytes;	/* MEMC_DRAM_DATA_WIDTH */
 };

 static const char *const clkname[] = {
 	"ddrc1",
 	"ddrc2",
 	"ddrcapb",
 	"ddrphycapb",
 	"ddrphyc" /* LAST clock => used for get_rate() */
 };

 int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint32_t mem_speed)
 {
 	unsigned long ddrphy_clk;
 	unsigned long ddr_clk;
 	struct clk clk;
 	int ret;
 	unsigned int idx;

 	for (idx = 0; idx < ARRAY_SIZE(clkname); idx++) {
 		ret = clk_get_by_name(priv->dev, clkname[idx], &clk);

 		if (!ret)
 			ret = clk_enable(&clk);

 		if (ret) {
 			log_err("error for %s : %d\n", clkname[idx], ret);
 			return ret;
 		}
 	}

 	priv->clk = clk;
 	ddrphy_clk = clk_get_rate(&priv->clk);

 	log_debug("DDR: mem_speed (%d kHz), RCC %d kHz\n",
 		  mem_speed, (u32)(ddrphy_clk / 1000));
 	/* max 10% frequency delta */
 	ddr_clk = abs(ddrphy_clk - mem_speed * 1000);
 	if (ddr_clk > (mem_speed * 100)) {
 		log_err("DDR expected freq %d kHz, current is %d kHz\n",
 			mem_speed, (u32)(ddrphy_clk / 1000));
 		return -EINVAL;
 	}

 	return 0;
 }

 __weak int board_stm32mp1_ddr_config_name_match(struct udevice *dev,
 						const char *name)
 {
 	return 0;	/* Always match */
 }

 static ofnode stm32mp1_ddr_get_ofnode(struct udevice *dev)
 {
 	const char *name;
 	ofnode node;

 	dev_for_each_subnode(node, dev) {
 		name = ofnode_get_property(node, "compatible", NULL);

 		if (!board_stm32mp1_ddr_config_name_match(dev, name))
 			return node;
 	}

 	return dev_ofnode(dev);
 }

 static int stm32mp1_ddr_setup(struct udevice *dev)
 {
 	struct ddr_info *priv = dev_get_priv(dev);
 	int ret;
 	unsigned int idx;
 	struct clk axidcg;
 	struct stm32mp1_ddr_config config;
 	ofnode node = stm32mp1_ddr_get_ofnode(dev);

 #define PARAM(x, y, z)							\
 	{	.name = x,						\
 		.offset = offsetof(struct stm32mp1_ddr_config, y),	\
 		.size = sizeof(config.y) / sizeof(u32),			\
 	}

 #define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x, NULL)
 #define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x, NULL)

 	const struct {
 		const char *name; /* name in DT */
 		const u32 offset; /* offset in config struct */
 		const u32 size;   /* size of parameters */
 	} param[] = {
 		CTL_PARAM(reg),
 		CTL_PARAM(timing),
 		CTL_PARAM(map),
 		CTL_PARAM(perf),
 		PHY_PARAM(reg),
 		PHY_PARAM(timing)
 	};

 	config.info.speed = ofnode_read_u32_default(node, "st,mem-speed", 0);
 	config.info.size = ofnode_read_u32_default(node, "st,mem-size", 0);
 	config.info.name = ofnode_read_string(node, "st,mem-name");
 	if (!config.info.name) {
 		dev_dbg(dev, "no st,mem-name\n");
 		return -EINVAL;
 	}
 	printf("RAM: %s\n", config.info.name);

 	for (idx = 0; idx < ARRAY_SIZE(param); idx++) {
 		ret = ofnode_read_u32_array(node, param[idx].name,
 					 (void *)((u32)&config +
 						  param[idx].offset),
 					 param[idx].size);
 		dev_dbg(dev, "%s: %s[0x%x] = %d\n", __func__,
 			param[idx].name, param[idx].size, ret);
 		if (ret) {
 			dev_err(dev, "Cannot read %s, error=%d\n",
 				param[idx].name, ret);
 			return -EINVAL;
 		}
 	}

 	ret = clk_get_by_name(dev, "axidcg", &axidcg);
 	if (ret) {
 		dev_dbg(dev, "%s: Cannot found axidcg\n", __func__);
 		return -EINVAL;
 	}
 	clk_disable(&axidcg); /* disable clock gating during init */

 	stm32mp1_ddr_init(priv, &config);

 	clk_enable(&axidcg); /* enable clock gating */

 	/* check size */
 	dev_dbg(dev, "get_ram_size(%x, %x)\n",
 		(u32)priv->info.base, (u32)STM32_DDR_SIZE);

 	priv->info.size = get_ram_size((long *)priv->info.base,
 				       STM32_DDR_SIZE);

 	dev_dbg(dev, "info.size: %x\n", (u32)priv->info.size);

 	/* check memory access for all memory */
 	if (config.info.size != priv->info.size) {
 		printf("DDR invalid size : 0x%x, expected 0x%x\n",
 		       priv->info.size, config.info.size);
 		return -EINVAL;
 	}
 	return 0;
 }

 static u8 get_data_bus_width(struct stm32mp1_ddrctl *ctl)
 {
 	u32 reg = readl(&ctl->mstr) & DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK;
 	u8 data_bus_width = reg >> DDRCTRL_MSTR_DATA_BUS_WIDTH_SHIFT;

 	return data_bus_width;
 }

 static u8 get_nb_bank(struct stm32mp1_ddrctl *ctl)
 {
 	/* Count bank address bits */
 	u8 bits = 0;
 	u32 reg, val;

 	reg = readl(&ctl->addrmap1);
 	/* addrmap1.addrmap_bank_b1 */
 	val = (reg & GENMASK(5, 0)) >> 0;
 	if (val <= 31)
 		bits++;
 	/* addrmap1.addrmap_bank_b2 */
 	val = (reg & GENMASK(13, 8)) >> 8;
 	if (val <= 31)
 		bits++;
 	/* addrmap1.addrmap_bank_b3 */
 	val = (reg & GENMASK(21, 16)) >> 16;
 	if (val <= 31)
 		bits++;

 	return bits;
 }

 static u8 get_nb_col(struct stm32mp1_ddrctl *ctl, u8 data_bus_width)
 {
 	u8 bits;
 	u32 reg, val;

 	/* Count column address bits, start at 2 for b0 and b1 (fixed) */
 	bits = 2;

 	reg = readl(&ctl->addrmap2);
 	/* addrmap2.addrmap_col_b2 */
 	val = (reg & GENMASK(3, 0)) >> 0;
 	if (val <= 7)
 		bits++;
 	/* addrmap2.addrmap_col_b3 */
 	val = (reg & GENMASK(11, 8)) >> 8;
 	if (val <= 7)
 		bits++;
 	/* addrmap2.addrmap_col_b4 */
 	val = (reg & GENMASK(19, 16)) >> 16;
 	if (val <= 7)
 		bits++;
 	/* addrmap2.addrmap_col_b5 */
 	val = (reg & GENMASK(27, 24)) >> 24;
 	if (val <= 7)
 		bits++;

 	reg = readl(&ctl->addrmap3);
 	/* addrmap3.addrmap_col_b6 */
 	val = (reg & GENMASK(4, 0)) >> 0;
 	if (val <= 7)
 		bits++;
 	/* addrmap3.addrmap_col_b7 */
 	val = (reg & GENMASK(12, 8)) >> 8;
 	if (val <= 7)
 		bits++;
 	/* addrmap3.addrmap_col_b8 */
 	val = (reg & GENMASK(20, 16)) >> 16;
 	if (val <= 7)
 		bits++;
 	/* addrmap3.addrmap_col_b9 */
 	val = (reg & GENMASK(28, 24)) >> 24;
 	if (val <= 7)
 		bits++;

 	reg = readl(&ctl->addrmap4);
 	/* addrmap4.addrmap_col_b10 */
 	val = (reg & GENMASK(4, 0)) >> 0;
 	if (val <= 7)
 		bits++;
 	/* addrmap4.addrmap_col_b11 */
 	val = (reg & GENMASK(12, 8)) >> 8;
 	if (val <= 7)
 		bits++;

 	/*
 	 * column bits shift up:
 	 * 1 when half the data bus is used (data_bus_width = 1)
 	 * 2 when a quarter the data bus is used (data_bus_width = 2)
 	 * nothing to do for full data bus (data_bus_width = 0)
 	 */
 	bits += data_bus_width;

 	return bits;
 }

 static u8 get_nb_row(struct stm32mp1_ddrctl *ctl)
 {
 	/* Count row address bits */
 	u8 bits = 0;
 	u32 reg, val;

 	reg = readl(&ctl->addrmap5);
 	/* addrmap5.addrmap_row_b0 */
 	val = (reg & GENMASK(3, 0)) >> 0;
 	if (val <= 11)
 		bits++;
 	/* addrmap5.addrmap_row_b1 */
 	val = (reg & GENMASK(11, 8)) >> 8;
 	if (val <= 11)
 		bits++;
 	/* addrmap5.addrmap_row_b2_10 */
 	val = (reg & GENMASK(19, 16)) >> 16;
 	if (val <= 11)
 		bits += 9;
 	else
 		printf("warning: addrmap5.addrmap_row_b2_10 not supported\n");
 	/* addrmap5.addrmap_row_b11 */
 	val = (reg & GENMASK(27, 24)) >> 24;
 	if (val <= 11)
 		bits++;

 	reg = readl(&ctl->addrmap6);
 	/* addrmap6.addrmap_row_b12 */
 	val = (reg & GENMASK(3, 0)) >> 0;
 	if (val <= 11)
 		bits++;
 	/* addrmap6.addrmap_row_b13 */
 	val = (reg & GENMASK(11, 8)) >> 8;
 	if (val <= 11)
 		bits++;
 	/* addrmap6.addrmap_row_b14 */
 	val = (reg & GENMASK(19, 16)) >> 16;
 	if (val <= 11)
 		bits++;
 	/* addrmap6.addrmap_row_b15 */
 	val = (reg & GENMASK(27, 24)) >> 24;
 	if (val <= 11)
 		bits++;

 	if (reg & BIT(31))
 		printf("warning: LPDDR3_6GB_12GB is not supported\n");

 	return bits;
 }

 /*
  * stm32mp1_ddr_size
  *
  * Get the current DRAM size from the DDR CTL registers
  *
  * @return: DRAM size
  */
 u32 stm32mp1_ddr_size(struct udevice *dev)
 {
 	u8 nb_bit;
 	u32 ddr_size;
 	u8 data_bus_width;
 	struct ddr_info *priv = dev_get_priv(dev);
 	struct stm32mp1_ddrctl *ctl = priv->ctl;
 	struct stm32mp1_ddr_cfg *cfg = (struct stm32mp1_ddr_cfg *)dev_get_driver_data(dev);
 	const u8 nb_bytes = cfg->nb_bytes;

 	data_bus_width = get_data_bus_width(ctl);
 	nb_bit = get_nb_bank(ctl) + get_nb_col(ctl, data_bus_width) +
 		 get_nb_row(ctl);
 	if (nb_bit > 32) {
 		nb_bit = 32;
 		debug("invalid DDR configuration: %d bits\n", nb_bit);
 	}

 	ddr_size = (nb_bytes >> data_bus_width) << nb_bit;
 	if (ddr_size > STM32_DDR_SIZE) {
 		ddr_size = STM32_DDR_SIZE;
 		debug("invalid DDR configuration: size = %x\n", ddr_size);
 	}

 	return ddr_size;
 }

 static int stm32mp1_ddr_probe(struct udevice *dev)
 {
 	struct ddr_info *priv = dev_get_priv(dev);
 	struct regmap *map;
 	int ret;

 	priv->dev = dev;

 	ret = regmap_init_mem(dev_ofnode(dev), &map);
 	if (ret)
 		return log_ret(ret);

 	priv->ctl = regmap_get_range(map, 0);
 	priv->phy = regmap_get_range(map, 1);

 	priv->rcc = STM32_RCC_BASE;

 	priv->info.base = STM32_DDR_BASE;

 	if (IS_ENABLED(CONFIG_SPL_BUILD)) {
 		priv->info.size = 0;
 		ret = stm32mp1_ddr_setup(dev);

 		return log_ret(ret);
 	}

 	priv->info.size = stm32mp1_ddr_size(dev);

 	return 0;
 }

 static int stm32mp1_ddr_get_info(struct udevice *dev, struct ram_info *info)
 {
 	struct ddr_info *priv = dev_get_priv(dev);

 	*info = priv->info;

 	return 0;
 }

 static struct ram_ops stm32mp1_ddr_ops = {
 	.get_info = stm32mp1_ddr_get_info,
 };

 static const struct stm32mp1_ddr_cfg stm32mp13x_ddr_cfg = {
 	.nb_bytes = 2,
 };

 static const struct stm32mp1_ddr_cfg stm32mp15x_ddr_cfg = {
 	.nb_bytes = 4,
 };

 static const struct udevice_id stm32mp1_ddr_ids[] = {
 	{ .compatible = "st,stm32mp1-ddr", .data = (ulong)&stm32mp15x_ddr_cfg},
 	{ .compatible = "st,stm32mp13-ddr", .data = (ulong)&stm32mp13x_ddr_cfg},
 	{ }
 };

 U_BOOT_DRIVER(ddr_stm32mp1) = {
 	.name = "stm32mp1_ddr",
 	.id = UCLASS_RAM,
 	.of_match = stm32mp1_ddr_ids,
 	.ops = &stm32mp1_ddr_ops,
 	.probe = stm32mp1_ddr_probe,
 	.priv_auto	= sizeof(struct ddr_info),
 };
	// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
	/*
	* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
	*/

	#define LOG_CATEGORY UCLASS_RAM

	#include <common.h>
	#include <clk.h>
	#include <dm.h>
	#include <init.h>
	#include <log.h>
	#include <ram.h>
	#include <regmap.h>
	#include <syscon.h>
	#include <asm/io.h>
	#include <dm/device_compat.h>
	#include "stm32mp1_ddr.h"
	#include "stm32mp1_ddr_regs.h"

	/* DDR subsystem configuration */
	struct stm32mp1_ddr_cfg {
	u8 nb_bytes; /* MEMC_DRAM_DATA_WIDTH */
	};

	static const char *const clkname[] = {
	"ddrc1",
	"ddrc2",
	"ddrcapb",
	"ddrphycapb",
	"ddrphyc" /* LAST clock => used for get_rate() */
	};

	int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint32_t mem_speed)
	{
	unsigned long ddrphy_clk;
	unsigned long ddr_clk;
	struct clk clk;
	int ret;
	unsigned int idx;

	for (idx = 0; idx < ARRAY_SIZE(clkname); idx++) {
	ret = clk_get_by_name(priv->dev, clkname[idx], &clk);

	if (!ret)
	ret = clk_enable(&clk);

	if (ret) {
	log_err("error for %s : %d\n", clkname[idx], ret);
	return ret;
	}
	}

	priv->clk = clk;
	ddrphy_clk = clk_get_rate(&priv->clk);

	log_debug("DDR: mem_speed (%d kHz), RCC %d kHz\n",
	mem_speed, (u32)(ddrphy_clk / 1000));
	/* max 10% frequency delta */
	ddr_clk = abs(ddrphy_clk - mem_speed * 1000);
	if (ddr_clk > (mem_speed * 100)) {
	log_err("DDR expected freq %d kHz, current is %d kHz\n",
	mem_speed, (u32)(ddrphy_clk / 1000));
	return -EINVAL;
	}

	return 0;
	}

	__weak int board_stm32mp1_ddr_config_name_match(struct udevice *dev,
	const char *name)
	{
	return 0; /* Always match */
	}

	static ofnode stm32mp1_ddr_get_ofnode(struct udevice *dev)
	{
	const char *name;
	ofnode node;

	dev_for_each_subnode(node, dev) {
	name = ofnode_get_property(node, "compatible", NULL);

	if (!board_stm32mp1_ddr_config_name_match(dev, name))
	return node;
	}

	return dev_ofnode(dev);
	}

	static int stm32mp1_ddr_setup(struct udevice *dev)
	{
	struct ddr_info *priv = dev_get_priv(dev);
	int ret;
	unsigned int idx;
	struct clk axidcg;
	struct stm32mp1_ddr_config config;
	ofnode node = stm32mp1_ddr_get_ofnode(dev);

	#define PARAM(x, y, z) \
	{ .name = x, \
	.offset = offsetof(struct stm32mp1_ddr_config, y), \
	.size = sizeof(config.y) / sizeof(u32), \
	}

	#define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x, NULL)
	#define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x, NULL)

	const struct {
	const char name; / name in DT */
	const u32 offset; /* offset in config struct */
	const u32 size; /* size of parameters */
	} param[] = {
	CTL_PARAM(reg),
	CTL_PARAM(timing),
	CTL_PARAM(map),
	CTL_PARAM(perf),
	PHY_PARAM(reg),
	PHY_PARAM(timing)
	};

	config.info.speed = ofnode_read_u32_default(node, "st,mem-speed", 0);
	config.info.size = ofnode_read_u32_default(node, "st,mem-size", 0);
	config.info.name = ofnode_read_string(node, "st,mem-name");
	if (!config.info.name) {
	dev_dbg(dev, "no st,mem-name\n");
	return -EINVAL;
	}
	printf("RAM: %s\n", config.info.name);

	for (idx = 0; idx < ARRAY_SIZE(param); idx++) {
	ret = ofnode_read_u32_array(node, param[idx].name,
	(void *)((u32)&config +
	param[idx].offset),
	param[idx].size);
	dev_dbg(dev, "%s: %s[0x%x] = %d\n", __func__,
	param[idx].name, param[idx].size, ret);
	if (ret) {
	dev_err(dev, "Cannot read %s, error=%d\n",
	param[idx].name, ret);
	return -EINVAL;
	}
	}

	ret = clk_get_by_name(dev, "axidcg", &axidcg);
	if (ret) {
	dev_dbg(dev, "%s: Cannot found axidcg\n", __func__);
	return -EINVAL;
	}
	clk_disable(&axidcg); /* disable clock gating during init */

	stm32mp1_ddr_init(priv, &config);

	clk_enable(&axidcg); /* enable clock gating */

	/* check size */
	dev_dbg(dev, "get_ram_size(%x, %x)\n",
	(u32)priv->info.base, (u32)STM32_DDR_SIZE);

	priv->info.size = get_ram_size((long *)priv->info.base,
	STM32_DDR_SIZE);

	dev_dbg(dev, "info.size: %x\n", (u32)priv->info.size);

	/* check memory access for all memory */
	if (config.info.size != priv->info.size) {
	printf("DDR invalid size : 0x%x, expected 0x%x\n",
	priv->info.size, config.info.size);
	return -EINVAL;
	}
	return 0;
	}

	static u8 get_data_bus_width(struct stm32mp1_ddrctl *ctl)
	{
	u32 reg = readl(&ctl->mstr) & DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK;
	u8 data_bus_width = reg >> DDRCTRL_MSTR_DATA_BUS_WIDTH_SHIFT;

	return data_bus_width;
	}

	static u8 get_nb_bank(struct stm32mp1_ddrctl *ctl)
	{
	/* Count bank address bits */
	u8 bits = 0;
	u32 reg, val;

	reg = readl(&ctl->addrmap1);
	/* addrmap1.addrmap_bank_b1 */
	val = (reg & GENMASK(5, 0)) >> 0;
	if (val <= 31)
	bits++;
	/* addrmap1.addrmap_bank_b2 */
	val = (reg & GENMASK(13, 8)) >> 8;
	if (val <= 31)
	bits++;
	/* addrmap1.addrmap_bank_b3 */
	val = (reg & GENMASK(21, 16)) >> 16;
	if (val <= 31)
	bits++;

	return bits;
	}

	static u8 get_nb_col(struct stm32mp1_ddrctl *ctl, u8 data_bus_width)
	{
	u8 bits;
	u32 reg, val;

	/* Count column address bits, start at 2 for b0 and b1 (fixed) */
	bits = 2;

	reg = readl(&ctl->addrmap2);
	/* addrmap2.addrmap_col_b2 */
	val = (reg & GENMASK(3, 0)) >> 0;
	if (val <= 7)
	bits++;
	/* addrmap2.addrmap_col_b3 */
	val = (reg & GENMASK(11, 8)) >> 8;
	if (val <= 7)
	bits++;
	/* addrmap2.addrmap_col_b4 */
	val = (reg & GENMASK(19, 16)) >> 16;
	if (val <= 7)
	bits++;
	/* addrmap2.addrmap_col_b5 */
	val = (reg & GENMASK(27, 24)) >> 24;
	if (val <= 7)
	bits++;

	reg = readl(&ctl->addrmap3);
	/* addrmap3.addrmap_col_b6 */
	val = (reg & GENMASK(4, 0)) >> 0;
	if (val <= 7)
	bits++;
	/* addrmap3.addrmap_col_b7 */
	val = (reg & GENMASK(12, 8)) >> 8;
	if (val <= 7)
	bits++;
	/* addrmap3.addrmap_col_b8 */
	val = (reg & GENMASK(20, 16)) >> 16;
	if (val <= 7)
	bits++;
	/* addrmap3.addrmap_col_b9 */
	val = (reg & GENMASK(28, 24)) >> 24;
	if (val <= 7)
	bits++;

	reg = readl(&ctl->addrmap4);
	/* addrmap4.addrmap_col_b10 */
	val = (reg & GENMASK(4, 0)) >> 0;
	if (val <= 7)
	bits++;
	/* addrmap4.addrmap_col_b11 */
	val = (reg & GENMASK(12, 8)) >> 8;
	if (val <= 7)
	bits++;

	/*
	* column bits shift up:
	* 1 when half the data bus is used (data_bus_width = 1)
	* 2 when a quarter the data bus is used (data_bus_width = 2)
	* nothing to do for full data bus (data_bus_width = 0)
	*/
	bits += data_bus_width;

	return bits;
	}

	static u8 get_nb_row(struct stm32mp1_ddrctl *ctl)
	{
	/* Count row address bits */
	u8 bits = 0;
	u32 reg, val;

	reg = readl(&ctl->addrmap5);
	/* addrmap5.addrmap_row_b0 */
	val = (reg & GENMASK(3, 0)) >> 0;
	if (val <= 11)
	bits++;
	/* addrmap5.addrmap_row_b1 */
	val = (reg & GENMASK(11, 8)) >> 8;
	if (val <= 11)
	bits++;
	/* addrmap5.addrmap_row_b2_10 */
	val = (reg & GENMASK(19, 16)) >> 16;
	if (val <= 11)
	bits += 9;
	else
	printf("warning: addrmap5.addrmap_row_b2_10 not supported\n");
	/* addrmap5.addrmap_row_b11 */
	val = (reg & GENMASK(27, 24)) >> 24;
	if (val <= 11)
	bits++;

	reg = readl(&ctl->addrmap6);
	/* addrmap6.addrmap_row_b12 */
	val = (reg & GENMASK(3, 0)) >> 0;
	if (val <= 11)
	bits++;
	/* addrmap6.addrmap_row_b13 */
	val = (reg & GENMASK(11, 8)) >> 8;
	if (val <= 11)
	bits++;
	/* addrmap6.addrmap_row_b14 */
	val = (reg & GENMASK(19, 16)) >> 16;
	if (val <= 11)
	bits++;
	/* addrmap6.addrmap_row_b15 */
	val = (reg & GENMASK(27, 24)) >> 24;
	if (val <= 11)
	bits++;

	if (reg & BIT(31))
	printf("warning: LPDDR3_6GB_12GB is not supported\n");

	return bits;
	}

	/*
	* stm32mp1_ddr_size
	*
	* Get the current DRAM size from the DDR CTL registers
	*
	* @return: DRAM size
	*/
	u32 stm32mp1_ddr_size(struct udevice *dev)
	{
	u8 nb_bit;
	u32 ddr_size;
	u8 data_bus_width;
	struct ddr_info *priv = dev_get_priv(dev);
	struct stm32mp1_ddrctl *ctl = priv->ctl;
	struct stm32mp1_ddr_cfg cfg = (struct stm32mp1_ddr_cfg )dev_get_driver_data(dev);
	const u8 nb_bytes = cfg->nb_bytes;

	data_bus_width = get_data_bus_width(ctl);
	nb_bit = get_nb_bank(ctl) + get_nb_col(ctl, data_bus_width) +
	get_nb_row(ctl);
	if (nb_bit > 32) {
	nb_bit = 32;
	debug("invalid DDR configuration: %d bits\n", nb_bit);
	}

	ddr_size = (nb_bytes >> data_bus_width) << nb_bit;
	if (ddr_size > STM32_DDR_SIZE) {
	ddr_size = STM32_DDR_SIZE;
	debug("invalid DDR configuration: size = %x\n", ddr_size);
	}

	return ddr_size;
	}

	static int stm32mp1_ddr_probe(struct udevice *dev)
	{
	struct ddr_info *priv = dev_get_priv(dev);
	struct regmap *map;
	int ret;

	priv->dev = dev;

	ret = regmap_init_mem(dev_ofnode(dev), &map);
	if (ret)
	return log_ret(ret);

	priv->ctl = regmap_get_range(map, 0);
	priv->phy = regmap_get_range(map, 1);

	priv->rcc = STM32_RCC_BASE;

	priv->info.base = STM32_DDR_BASE;

	if (IS_ENABLED(CONFIG_SPL_BUILD)) {
	priv->info.size = 0;
	ret = stm32mp1_ddr_setup(dev);

	return log_ret(ret);
	}

	priv->info.size = stm32mp1_ddr_size(dev);

	return 0;
	}

	static int stm32mp1_ddr_get_info(struct udevice dev, struct ram_info info)
	{
	struct ddr_info *priv = dev_get_priv(dev);

	*info = priv->info;

	return 0;
	}

	static struct ram_ops stm32mp1_ddr_ops = {
	.get_info = stm32mp1_ddr_get_info,
	};

	static const struct stm32mp1_ddr_cfg stm32mp13x_ddr_cfg = {
	.nb_bytes = 2,
	};

	static const struct stm32mp1_ddr_cfg stm32mp15x_ddr_cfg = {
	.nb_bytes = 4,
	};

	static const struct udevice_id stm32mp1_ddr_ids[] = {
	{ .compatible = "st,stm32mp1-ddr", .data = (ulong)&stm32mp15x_ddr_cfg},
	{ .compatible = "st,stm32mp13-ddr", .data = (ulong)&stm32mp13x_ddr_cfg},
	{ }
	};

	U_BOOT_DRIVER(ddr_stm32mp1) = {
	.name = "stm32mp1_ddr",
	.id = UCLASS_RAM,
	.of_match = stm32mp1_ddr_ids,
	.ops = &stm32mp1_ddr_ops,
	.probe = stm32mp1_ddr_probe,
	.priv_auto = sizeof(struct ddr_info),
	};