| // SPDX-License-Identifier: GPL-2.0+ OR X11 |
| /* |
| * Freescale ls2080a SOC common device tree source |
| * |
| * Copyright 2013-2015 Freescale Semiconductor, Inc. |
| */ |
| |
| / { |
| compatible = "fsl,ls2080a"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x00000000 0x80000000 0 0x80000000>; |
| /* DRAM space - 1, size : 2 GB DRAM */ |
| }; |
| |
| gic: interrupt-controller@6000000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ |
| <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */ |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupts = <1 9 0x4>; |
| }; |
| |
| gic_lpi_base: syscon@0x80000000 { |
| compatible = "gic-lpi-base"; |
| reg = <0x0 0x80000000 0x0 0x100000>; |
| max-gic-redistributors = <8>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ |
| <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ |
| <1 11 0x8>, /* Virtual PPI, active-low */ |
| <1 10 0x8>; /* Hypervisor PPI, active-low */ |
| }; |
| |
| serial0: serial@21c0500 { |
| device_type = "serial"; |
| compatible = "fsl,ns16550", "ns16550a"; |
| reg = <0x0 0x21c0500 0x0 0x100>; |
| clock-frequency = <0>; /* Updated by bootloader */ |
| interrupts = <0 32 0x1>; /* edge triggered */ |
| }; |
| |
| serial1: serial@21c0600 { |
| device_type = "serial"; |
| compatible = "fsl,ns16550", "ns16550a"; |
| reg = <0x0 0x21c0600 0x0 0x100>; |
| clock-frequency = <0>; /* Updated by bootloader */ |
| interrupts = <0 32 0x1>; /* edge triggered */ |
| }; |
| |
| i2c0: i2c@2000000 { |
| status = "disabled"; |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2000000 0x0 0x10000>; |
| interrupts = <0 34 0x4>; /* Level high type */ |
| }; |
| |
| i2c1: i2c@2010000 { |
| status = "disabled"; |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2010000 0x0 0x10000>; |
| interrupts = <0 34 0x4>; /* Level high type */ |
| }; |
| |
| i2c2: i2c@2020000 { |
| status = "disabled"; |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2020000 0x0 0x10000>; |
| interrupts = <0 35 0x4>; /* Level high type */ |
| }; |
| |
| i2c3: i2c@2030000 { |
| status = "disabled"; |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2030000 0x0 0x10000>; |
| interrupts = <0 35 0x4>; /* Level high type */ |
| }; |
| |
| dspi: dspi@2100000 { |
| compatible = "fsl,vf610-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2100000 0x0 0x10000>; |
| interrupts = <0 26 0x4>; /* Level high type */ |
| num-cs = <6>; |
| }; |
| |
| qspi: quadspi@1550000 { |
| compatible = "fsl,ls2080a-qspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x20c0000 0x0 0x10000>, |
| <0x0 0x20000000 0x0 0x10000000>; |
| reg-names = "QuadSPI", "QuadSPI-memory"; |
| status = "disabled"; |
| }; |
| |
| esdhc: esdhc@0 { |
| compatible = "fsl,esdhc"; |
| reg = <0x0 0x2140000 0x0 0x10000>; |
| interrupts = <0 28 0x4>; /* Level high type */ |
| little-endian; |
| bus-width = <4>; |
| }; |
| |
| usb0: usb3@3100000 { |
| compatible = "fsl,layerscape-dwc3"; |
| reg = <0x0 0x3100000 0x0 0x10000>; |
| interrupts = <0 80 0x4>; /* Level high type */ |
| dr_mode = "host"; |
| }; |
| |
| usb1: usb3@3110000 { |
| compatible = "fsl,layerscape-dwc3"; |
| reg = <0x0 0x3110000 0x0 0x10000>; |
| interrupts = <0 81 0x4>; /* Level high type */ |
| dr_mode = "host"; |
| }; |
| |
| pcie@3400000 { |
| compatible = "fsl,ls-pcie", "snps,dw-pcie"; |
| reg = <0x00 0x03400000 0x0 0x80000 /* dbi registers */ |
| 0x00 0x03480000 0x0 0x80000 /* lut registers */ |
| 0x10 0x00000000 0x0 0x20000>; /* configuration space */ |
| reg-names = "dbi", "lut", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| num-lanes = <4>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x10 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie@3500000 { |
| compatible = "fsl,ls-pcie", "snps,dw-pcie"; |
| reg = <0x00 0x03500000 0x0 0x80000 /* dbi registers */ |
| 0x00 0x03580000 0x0 0x80000 /* lut registers */ |
| 0x12 0x00000000 0x0 0x20000>; /* configuration space */ |
| reg-names = "dbi", "lut", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| num-lanes = <4>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x12 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie@3600000 { |
| compatible = "fsl,ls-pcie", "snps,dw-pcie"; |
| reg = <0x00 0x03600000 0x0 0x80000 /* dbi registers */ |
| 0x00 0x03680000 0x0 0x80000 /* lut registers */ |
| 0x14 0x00000000 0x0 0x20000>; /* configuration space */ |
| reg-names = "dbi", "lut", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| num-lanes = <8>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x14 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie@3700000 { |
| compatible = "fsl,ls-pcie", "snps,dw-pcie"; |
| reg = <0x00 0x03700000 0x0 0x80000 /* dbi registers */ |
| 0x00 0x03780000 0x0 0x80000 /* lut registers */ |
| 0x16 0x00000000 0x0 0x20000>; /* configuration space */ |
| reg-names = "dbi", "lut", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| num-lanes = <4>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x16 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| }; |
| |
| sata: sata@3200000 { |
| compatible = "fsl,ls2080a-ahci"; |
| reg = <0x0 0x3200000 0x0 0x10000>; |
| interrupts = <0 133 0x4>; /* Level high type */ |
| status = "disabled"; |
| }; |
| |
| fsl_mc: fsl-mc@80c000000 { |
| compatible = "fsl,qoriq-mc", "simple-mfd"; |
| reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ |
| <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ |
| #address-cells = <3>; |
| #size-cells = <1>; |
| |
| /* |
| * Region type 0x0 - MC portals |
| * Region type 0x1 - QBMAN portals |
| */ |
| ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 |
| 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; |
| |
| dpmacs { |
| compatible = "simple-mfd"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| dpmac1: dpmac@1 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x1>; |
| status = "disabled"; |
| }; |
| |
| dpmac2: dpmac@2 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x2>; |
| status = "disabled"; |
| }; |
| |
| dpmac3: dpmac@3 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x3>; |
| status = "disabled"; |
| }; |
| |
| dpmac4: dpmac@4 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x4>; |
| status = "disabled"; |
| }; |
| |
| dpmac5: dpmac@5 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x5>; |
| status = "disabled"; |
| }; |
| |
| dpmac6: dpmac@6 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x6>; |
| status = "disabled"; |
| }; |
| |
| dpmac7: dpmac@7 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x7>; |
| status = "disabled"; |
| }; |
| |
| dpmac8: dpmac@8 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x8>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| emdio1: mdio@8B96000 { |
| compatible = "fsl,ls-mdio"; |
| reg = <0x0 0x8B96000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| emdio2: mdio@8B97000 { |
| compatible = "fsl,ls-mdio"; |
| reg = <0x0 0x8B97000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |