arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi

// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
 */

#include <dt-bindings/net/ti-dp83867.h>

/ {
	chosen {
		stdout-path = "serial2:115200n8";
		tick-timer = &timer1;
	};

	aliases {
		ethernet0 = &cpsw_port1;
	};
};

&cbass_main{
	u-boot,dm-spl;
};

&cbass_mcu_wakeup {
	u-boot,dm-spl;

	timer1: timer@40400000 {
		compatible = "ti,omap5430-timer";
		reg = <0x0 0x40400000 0x0 0x80>;
		ti,timer-alwon;
		clock-frequency = <25000000>;
		u-boot,dm-spl;
	};

	mcu_navss {
		u-boot,dm-spl;

		ringacc@2b800000 {
			u-boot,dm-spl;
		};

		dma-controller@285c0000 {
			u-boot,dm-spl;
		};
	};
};

&secure_proxy_main {
	u-boot,dm-spl;
};

&dmsc {
	u-boot,dm-spl;
	k3_sysreset: sysreset-controller {
		compatible = "ti,sci-sysreset";
		u-boot,dm-spl;
	};
};

&k3_pds {
	u-boot,dm-spl;
};

&k3_clks {
	u-boot,dm-spl;
};

&k3_reset {
	u-boot,dm-spl;
};

&wkup_pmx0 {
	u-boot,dm-spl;
	mcu_cpsw_pins_default: mcu_cpsw_pins_default {
		pinctrl-single,pins = <
			J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
			J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
			J721E_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */
			J721E_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */
			J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */
			J721E_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */
			J721E_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */
			J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
			J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
			J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
			J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */
			J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
		>;
	};

	mcu_mdio_pins_default: mcu_mdio1_pins_default {
		pinctrl-single,pins = <
			J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
			J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
		>;
	};
};

&main_pmx0 {
	u-boot,dm-spl;
};

&main_uart0 {
	u-boot,dm-spl;
};

&mcu_uart0 {
	u-boot,dm-spl;
};

&main_sdhci0 {
	u-boot,dm-spl;
};

&main_sdhci1 {
	u-boot,dm-spl;
};

&main_usbss0_pins_default {
	u-boot,dm-spl;
};

&usbss0 {
	u-boot,dm-spl;
	ti,usb2-only;
};

&usb0 {
	dr_mode = "peripheral";
	u-boot,dm-spl;
};

&mcu_cpsw {
	pinctrl-names = "default";
	pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
};

&davinci_mdio {
	phy0: ethernet-phy@0 {
		reg = <0>;
		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
	};
};

&cpsw_port1 {
	phy-mode = "rgmii-rxid";
	phy-handle = <&phy0>;
};

&mcu_cpsw {
	reg = <0x0 0x46000000 0x0 0x200000>,
	      <0x0 0x40f00200 0x0 0x2>;
	reg-names = "cpsw_nuss", "mac_efuse";
	/delete-property/ ranges;

	cpsw-phy-sel@40f04040 {
		compatible = "ti,am654-cpsw-phy-sel";
		reg= <0x0 0x40f04040 0x0 0x4>;
		reg-names = "gmii-sel";
	};
};

&main_mmc1_pins_default {
	u-boot,dm-spl;
};

&wkup_i2c0_pins_default {
	u-boot,dm-spl;
};

&wkup_i2c0 {
	u-boot,dm-spl;
};

&main_i2c0 {
	u-boot,dm-spl;
};

&main_i2c0_pins_default {
	u-boot,dm-spl;
};

&exp2 {
	u-boot,dm-spl;
};

&mcu_fss0_ospi0_pins_default {
	u-boot,dm-spl;
};

&fss {
	u-boot,dm-spl;
};

&ospi0 {
	u-boot,dm-spl;

	flash@0 {
		u-boot,dm-spl;
	};
};

&ospi1 {
	u-boot,dm-spl;

	flash@0 {
		u-boot,dm-spl;
	};
};

&mcu_fss0_ospi1_pins_default {
	u-boot,dm-spl;
};

&chipid {
	u-boot,dm-spl;
};