| /* |
| * Copyright (C) 2018 MediaTek Inc. |
| * Author: Ryder Lee <ryder.lee@mediatek.com> |
| * |
| * SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| */ |
| |
| /dts-v1/; |
| #include "mt7623.dtsi" |
| #include "mt7623-u-boot.dtsi" |
| |
| / { |
| model = "UniElec U7623-02 eMMC"; |
| compatible = "unielec,u7623-02-emmc", "mediatek,mt7623"; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0 0x80000000 0 0x20000000>; |
| }; |
| |
| chosen { |
| stdout-path = &uart2; |
| tick-timer = &timer0; |
| }; |
| |
| reg_1p8v: regulator-1p8v { |
| compatible = "regulator-fixed"; |
| regulator-name = "fixed-1.8V"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_3p3v: regulator-3p3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "fixed-3.3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_5v: regulator-5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "fixed-5V"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| led3 { |
| label = "u7623-01:green:led3"; |
| gpios = <&gpio 14 GPIO_ACTIVE_LOW>; |
| default-state = "off"; |
| }; |
| |
| led4 { |
| label = "u7623-01:green:led4"; |
| gpios = <&gpio 15 GPIO_ACTIVE_LOW>; |
| default-state = "off"; |
| }; |
| }; |
| }; |
| |
| ð { |
| status = "okay"; |
| mediatek,gmac-id = <0>; |
| phy-mode = "rgmii"; |
| mediatek,switch = "mt7530"; |
| mediatek,mcm; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| &mmc0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc0_pins_default>; |
| status = "okay"; |
| bus-width = <8>; |
| max-frequency = <50000000>; |
| cap-mmc-highspeed; |
| vmmc-supply = <®_3p3v>; |
| vqmmc-supply = <®_1p8v>; |
| non-removable; |
| }; |
| |
| &pinctrl { |
| ephy_default: ephy_default { |
| mux { |
| function = "eth"; |
| groups = "mdc_mdio", "ephy"; |
| }; |
| |
| conf { |
| pins = "G2_TXEN", "G2_TXD0", "G2_TXD1", "G2_TXD2", |
| "G2_TXD3", "G2_TXC", "G2_RXC", "G2_RXD0", |
| "G2_RXD1", "G2_RXD2", "G2_RXD3", "G2_RXDV", |
| "MDC", "MDIO"; |
| drive-strength = <12>; |
| mediatek,tdsel = <5>; |
| }; |
| }; |
| |
| mmc0_pins_default: mmc0default { |
| mux { |
| function = "msdc"; |
| groups = "msdc0"; |
| }; |
| |
| conf-cmd-data { |
| pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1", |
| "MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4", |
| "MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7"; |
| input-enable; |
| bias-pull-up; |
| }; |
| |
| conf-clk { |
| pins = "MSDC0_CLK"; |
| bias-pull-down; |
| }; |
| |
| conf-rst { |
| pins = "MSDC0_RSTB"; |
| bias-pull-up; |
| }; |
| }; |
| |
| pcie_default: pcie-default { |
| mux { |
| function = "pcie"; |
| groups = "pcie0_0_perst", "pcie1_0_perst"; |
| }; |
| }; |
| |
| uart0_pins_a: uart0-default { |
| mux { |
| function = "uart"; |
| groups = "uart0_0_txd_rxd"; |
| }; |
| }; |
| |
| uart1_pins_a: uart1-default { |
| mux { |
| function = "uart"; |
| groups = "uart1_0_txd_rxd"; |
| }; |
| }; |
| |
| uart2_pins_a: uart2-default { |
| mux { |
| function = "uart"; |
| groups = "uart2_0_txd_rxd"; |
| }; |
| }; |
| |
| uart2_pins_b: uart2-alt { |
| mux { |
| function = "uart"; |
| groups = "uart2_1_txd_rxd"; |
| }; |
| }; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pcie_default>; |
| status = "okay"; |
| |
| pcie@0,0 { |
| status = "okay"; |
| }; |
| |
| pcie@1,0 { |
| status = "okay"; |
| }; |
| }; |
| |
| &pcie0_phy { |
| status = "okay"; |
| }; |
| |
| &pcie1_phy { |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pins_a>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_pins_a>; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_pins_b>; |
| status = "okay"; |
| }; |